一种新型的现代战机复合导引律研究

针对现代战机近距空战导引过程,建立了战机与目标的相对运动模型。应用滑模变结构控制理论,以拦截时间、视线角速率和指令加速度变化率为性能指标,推导出一种增广比例加滑模变结构的新型复合导引律,给出了其设计机理,并在理论上对变参数进行了优化设计。仿真结果表明,该导引律结构简单,能有效克服目标机动,在具有较强鲁棒性的同时,其导引性能较传统的PPN有较大提高,具有工程可实现性和有效性。     

环控系统减少引气量和降低燃油代偿损失研究

随着能源问题越来越突出,降低环控系统燃油代偿损失显得越来越重要。针对这个问题,综述了当前应用研究中降低燃油代偿的不同方法,并重点对闭式循环制冷系统和考虑载荷因子的引气系统在减少引气量和降低燃油代偿损失方面进行了探讨。     

Fault self-repair strategy based on evolvable hardware and reparation balance technology

In the face of harsh natural environment applications such as earth-orbiting and deep space satellites, underwater sea vehicles, strong electromagnetic interference and temperature stress,the circuits faults appear easily. Circuit faults will inevitably lead to serious losses of availability or impeded mission success without self-repair over the mission duration. Traditional fault-repair methods based on redundant fault-tolerant technique are straightforward to implement, yet their area, power and weight cost can be excessive. Moreover they utilize all plug-in or component level circuits to realize redundant backup, such that their applicability is limited. Hence, a novel selfrepair technology based on evolvable hardware（EHW） and reparation balance technology（RBT） is proposed. Its cost is low, and fault self-repair of various circuits and devices can be realized through dynamic configuration. Making full use of the fault signals, correcting circuit can be found through EHW technique to realize the balance and compensation of the fault output-signals. In this paper, the self-repair model was analyzed which based on EHW and RBT technique, the specific self-repair strategy was studied, the corresponding self-repair circuit fault system was designed, and the typical faults were simulated and analyzed which combined with the actual electronic devices. Simulation results demonstrated that the proposed fault self-repair strategy was feasible. Compared to traditional techniques, fault self-repair based on EHW consumes fewer hardware resources, and the scope of fault self-repair was expanded significantly.     

基于Fratar模型的航班时刻需求战略预测方法

航班时刻是机场运行的基础和核心,准确预测机场的航班时刻需求,对于指导机场基础设施建设、运行模式调整等具有重要意义。在航班计划结构信息分析的基础上,构建了全国航班O-D矩阵,建立了多层级机场起降量预测模型,并以起降量预测结果为输入,利用Fratar交通分布预测模型,预测目标机场时刻需求。以杭州萧山机场为例,以2010年为基年,2014为预测年,验证了方法的准确性和可行性,并预测了2020年航班时刻需求,分析了不同运行模式下机场理论容量与航班时刻需求的匹配状况,分析结果表明,2020年萧山机场需由隔离运行模式过渡到相关进近,方能满足时刻需求。     

基于仿生的大展弦比直机翼结构布局形式研究

为了探讨大展弦比直机翼的结构布局形式,借鉴自然界中的鱼骨和鸟羽毛以及树叶的叶脉形式,利用有限元分析与满应力优化作为设计手段,对三种不同的结构布局形式(A构型、B构型和常规构型)开展基于强度、刚度以及重量条件限制下的有关响应的对比研究.计算结果表明:在不同尺度的等重量条件限制下,"A构型"弯曲刚度最大,扭转刚度居中;"B构型"弯曲刚度居中,扭转刚度最小;"常规构型"弯曲刚度最小,扭转刚度最大.分析得出机翼的翼肋布置应该"适当的"倾斜.最后给出三点结论.     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

探讨飞行器翼身不同结构刚度对翼尖位移和结构重量的关系

为了研究大展弦比双机身布局无人机中翼身结构不同刚度对结构响应的影响,本文采用有限元分析与满应力优化相结合来探讨这一问题.计算结果表明:机翼与机身之间不同刚度对结构响应存在影响.建议结构设计时注意这一现象并加以利用,从而得到轻量化的结构设计.针对算例进一步计算与分析表明:采用本文方法得到的结构优化方案,同样也能够满足该飞机的静、动气弹要求.结论:采用本文方法,不仅可以研究飞机部件之间不同刚度对飞机结构响应的影响,还可以进行全机的结构方案设计,并对此方案进行刚度、强度、颤振和控制面效率的分析与评估.     

航天ATS快速测试体系结构研究

快速发射是未来空间信息作战和导弹武器发展面临的新课题,快速测试是快速发射的重要环节。航天ATS快速测试需要遵循一定的体系结构而发展。以国际通用测试系统体系结构为背景,结合我国航天测试的需求,提出了航天ATS快速测试体系结构,分析了航天ATS快速测试的测试流程并行化、关键参数连续监测化和测试数据处理快速化等目标,以及所涉及到的图形化程序开发、仪器可互换等关键技术。结论有利于促进航天ATS快速测试技术的进步,并为其发展提供参考。     

象州石龙客家话语音记略

广西象州县石龙镇外来人口众多,汉语方言复杂,客家话是一大方言.文章在实地调查基础上总结出石龙镇客家话的语音系统,对语音特点做了一些分析,制作了单字音声韵调配合表.