系统可靠性预测方法

概述了系统可靠性预测的主要方法，对它们各自的优缺点和适用范围进行了系统的介绍了评论。在此基础上，提出一些新的可靠性预测方法，并对新方法的合理性进行了论证。     

同时性问题研究(一)

本文对狭义相对论同时性的相对性观点进行了分析，并提出狭义相对论在同时性的相对性问题的分析上有逻辑上的错误。关于同时性问题，文中提出了一个不同于相对论的观点，并与相对论的观点进行了比较。自1887年沃依格特（Voigt）给出了洛伦兹变换式，该变换式在近代物理学上起着重要作用，相对论在数学上就是以该变换式为基础的。但是，100多年来还无人对它作出物理解释，本文对洛伦兹变换式作出了明确的物理解释，并得出了在同一惯性参考系内，与一个事件相联系的静止点与运动点之间以洛伦兹变换式相联系的重要结论。它与相对论将洛伦兹变换作为两个作相对运动的惯性坐标系间事件的坐标变换式有重大区别。     

带通FSS结构的插入相位延迟特性

基于互导纳法研究实心半波壁频率选择表面(Frequency selective surface,FSS)的插入相位延迟(Insertion phase delay,IPD)特性,考察FSS结构的IPD与加载介质的IPD之间的关系,分析了介质厚度、极化状态等因素的影响,重点关注交叉极化状态,考察极化角及入射角变化时的去极化效应.结果表明,解决带通FSS结构交叉极化问题的方法是保证TE和TM两种主极化状态下谐振频率的一致性,从而减小两种极化状态的IPD之差.     

基于风洞试验的非定常空气动力模型识别

在某飞机模型大振幅风洞试验的基础上,分析讨论了单自由度叠加模型、动导数模型、混合模型和非定常模型的适用性.结果表明,单自由度叠加模型、动导数模型和混合模型在小攻角时均是可用的,在大攻角时都不能正确反映飞机的非定常迟滞特性;但与前两种模型相比,混合模型在中等攻角时仍然适用.对于非定常模型,无论在小攻角还是大攻角时,均能较好地反映耦合运动的非定常气动特性.     

开孔变刚度层合板压缩屈曲性能研究

针对开孔变刚度层合板,建立3种尺寸的层合板有限元模型,采用了线性屈曲、引入残余热应力的线性屈曲和引入初始缺陷的非线性屈曲的3种分析方法,研究了开孔层合板在压缩条件下的屈曲行为,并通过自动铺丝制造层合板进行试验对比,对3种方法的合理性进行了分析。结果表明,引入残余热应力的线性屈曲分析方法与试验结果最吻合,两者仅相差0.63%。基于该方法,讨论开孔层合板残余热应力分布特点和应力水平,得出了开孔层合板的应力分布云图和应力分布规律,计算出残余热应力对开孔复合材料层合的屈曲影响。结果表明,残余热应力对传统直线开孔层合板的屈曲载荷影响很小,仅提高了3.57%,但大大提高了变刚度开孔层合板的屈曲载荷,最多可达23.40%。说明纤维曲线铺放可以改变内部残余热应力的分布,提高整个开孔层合板承载压缩载荷的能力。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

基于知识图谱和自动机器学习的软件缺陷预测

不稳定和召回率低效的软件缺陷预测模型难以在行业领域应用,为解决稳定和高效各项性能评价指标的软件缺陷预测模型在工程实践应用的问题,提出了一种基于知识图谱和自动化机器学习的软件缺陷预测方法AutoKGGAS,首先获取软件缺陷预测模型数据,对知识建模、知识获取、知识融合、知识储存与知识计算等知识图谱构建技术研究,实现知识图谱...     

面向安全属性的软件组件可信依赖关系度量模型

随着软件的应用规模越来越大,软件系统一旦出现故障,很可能会造成人员伤亡或财产等重大损失,因此对软件可信性进行评估尤为重要.在安全攸关如航空航天等领域,作为可信关键属性之一的安全性影响着整个软件系统的可信评估.特别当一个组件受到安全攻击或缺陷出现时,可信性会下降,会影响到与它可信关联的组件可信性,从而影响到整个系统的可信...     

体育场挑蓬风荷载模拟实验研究

能容纳五万多观众的浙江省黄龙体育中心主体育场,在观众席上建有能遮挡风雨的挑蓬,挑蓬之大达座席覆盖率９０％以上,总面积２１０００ｍ２。挑蓬被支撑在外环梁和由斜拉索吊拉的内环梁上。大跨度梁结构受力问题,是建筑结构业一个十分复杂的问题,而杭州地区的地理位置处于我国的台风区,更显出风荷载影响的严重性。因此需对体育场置于大气边界层风洞中进行风荷载模拟实验,以取得合理的挑蓬体型系数,为结构设计的合理性和可靠性提供重要依据。最终可以节省建筑物的造价。