Survival of Deinococcus radiodurans against laboratory-simulated solar wind charged particles

In this experimental study, cells of the radiation-resistant bacterium Deinococcus radiodurans were exposed to several different sources of radiation chosen to replicate the charged particles found in the solar wind. Naked cells or cells mixed with dust grains (basalt or sandstone) differing in elemental composition were exposed to electrons, protons, and ions to determine the probability of cell survival after irradiation. Doses necessary to reduce the viability of cell population to 10% (LD(10)) were determined under different experimental conditions. The results of this study indicate that low-energy particle radiation (2-4?keV), typically present in the slow component of the solar wind, had no effect on dehydrated cells, even if exposed at fluences only reached in more than 1000 years at Sun-Earth distance (1 AU). Higher-energy ions (200?keV) found in solar flares would inactivate 90% of exposed cells after several events in less than 1 year at 1 AU. When mixed with dust grains, LD(10) increases about 10-fold. These results show that, compared to the highly deleterious effects of UV radiation, solar wind charged particles are relatively benign, and organisms protected under grains from UV radiation would also be protected from the charged particles considered in this study.     

Dust Near The Sun

We review the current knowledge and understanding of dust in the inner solar system. The major sources of the dust population in the inner solar system are comets and asteroids, but the relative contributions of these sources are not quantified. The production processes inward from 1 AU are: Poynting-Robertson deceleration of particles outside of 1 AU, fragmentation into dust due to particle-particle collisions, and direct dust production from comets. The loss processes are: dust collisional fragmentation, sublimation, radiation pressure acceleration, sputtering, and rotational bursting. These loss processes as well as dust surface processes release dust compounds in the ambient interplanetary medium. Between 1 and 0.1 AU the dust number densities and fluxes can be described by inward extrapolation of 1 AU measurements, assuming radial dependences that describe particles in close to circular orbits. Observations have confirmed the general accuracy of these assumptions for regions within 30° latitude of the ecliptic plane. The dust densities are considerably lower above the solar poles but Lorentz forces can lift particles of sizes < 5 μm to high latitudes and produce a random distribution of small grains that varies with the solar magnetic field. Also long-period comets are a source of out-of-ecliptic particles. Under present conditions no prominent dust ring exists near the Sun. We discuss the recent observations of sungrazing comets. Future in-situ experiments should measure the complex dynamics of small dust particles, identify the contribution of cometary dust to the inner-solar-system dust cloud, and determine dust interactions in the ambient interplanetary medium. The combination of in-situ dust measurements with particle and field measurements is recommended.     

Comets, Asteroids and Zodiacal Light as Seen by Iso

ISO performed a large variety of observing programmes on comets, asteroids and zodiacal light – covering about 1% of the archived observations – with a surprisingly rewarding scientific return. Outstanding results were related to the exceptionally bright comet Hale–Bopp and to ISO's capability to study in detail the water spectrum in a direct way. But many other results were broadly recognised: Discovery of new molecules in comets, the studies of crystalline silicates, the work on asteroid surface mineralogy, results from thermophysical studies of asteroids, a new determination of the asteroid number density in the main-belt and last but not least, the investigations on the spatial and spectral features of the zodiacal light.     

Interstellar Dust in the Solar System

The Ulysses spacecraft has been orbiting the Sun on a highly inclined ellipse almost perpendicular to the ecliptic plane (inclination 79°, perihelion distance 1.3 AU, aphelion distance 5.4 AU) since it encountered Jupiter in 1992. The in situ dust detector on board continuously measured interstellar dust grains with masses up to 10⁻¹³ kg, penetrating deep into the solar system. The flow direction is close to the mean apex of the Sun’s motion through the solar system and the grains act as tracers of the physical conditions in the local interstellar cloud (LIC). While Ulysses monitored the interstellar dust stream at high ecliptic latitudes between 3 and 5 AU, interstellar impactors were also measured with the in situ dust detectors on board Cassini, Galileo and Helios, covering a heliocentric distance range between 0.3 and 3 AU in the ecliptic plane. The interstellar dust stream in the inner solar system is altered by the solar radiation pressure force, gravitational focussing and interaction of charged grains with the time varying interplanetary magnetic field. We review the results from in situ interstellar dust measurements in the solar system and present Ulysses’ latest interstellar dust data. These data indicate a 30° shift in the impact direction of interstellar grains w.r.t. the interstellar helium flow direction, the reason of which is presently unknown.     

Cosima – High Resolution Time-of-Flight Secondary Ion Mass Spectrometer for the Analysis of Cometary Dust Particles onboard Rosetta

The ESA mission Rosetta, launched on March 2nd, 2004, carries an instrument suite to the comet 67P/Churyumov-Gerasimenko. The COmetary Secondary Ion Mass Anaylzer – COSIMA – is one of three cometary dust analyzing instruments onboard Rosetta. COSIMA is based on the analytic measurement method of secondary ion mass spectrometry (SIMS). The experiment’s goal is in-situ analysis of the elemental composition (and isotopic composition of key elements) of cometary grains. The chemical characterization will include the main organic components, present homologous and functional groups, as well as the mineralogical and petrographical classification of the inorganic phases. All this analysis is closely related to the chemistry and history of the early solar system. COSIMA covers a mass range from 1 to 3500 amu with a mass resolution m/Δm @ 50% of 2000 at mass 100 amu. Cometary dust is collected on special, metal covered, targets, which are handled by a target manipulation unit. Once exposed to the cometary dust environment, the collected dust grains are located on the target by a microscopic camera. A pulsed primary indium ion beam (among other entities) releases secondary ions from the dust grains. These ions, either positive or negative, are selected and accelerated by electrical fields and travel a well-defined distance through a drift tube and an ion reflector. A microsphere plate with dedicated amplifier is used to detect the ions. The arrival times of the ions are digitized, and the mass spectra of the secondary ions are calculated from these time-of-flight spectra. Through the instrument commissioning, COSIMA took the very first SIMS spectra of the targets in space. COSIMA will be the first instrument applying the SIMS technique in-situ to cometary grain analysis as Rosetta approaches the comet 67P/Churyumov-Gerasimenko, after a long journey of 10 years, in 2014.     

Characteristics of piezoelectric lead zirconate titanate multilayered detector bombarded with hypervelocity iron particles

A cosmic dust detector is currently being developed using a piezoelectric lead zirconate titanate (PZT) element. The characteristics of the multilayered detector (MD), which was composed of one hundred PZT disks, were investigated by bombarding it with hypervelocity iron particles supplied by a Van de Graaff accelerator. It was confirmed that there was a linear relationship between the signal amplitude observed from MD and the momentum of the particles. As compared with the single-layered detector (SD) that was composed of one PZT disk, it was found that the sensitivity of MD was ∼3 times higher than that of SD within the limits of the experimental conditions.     

Estimating Radiative Momentum Transfer Through a Thermal Analysis of the Pioneer Anomaly

A methodology based on point-like sources is discussed, enabling a reliable estimate of the acceleration of the Pioneer 10 and 11 probes caused by thermal effects. A sensitivity analysis of the several parameters of the model allows for a clear indication of the possible thermal origin of the so-called Pioneer anomaly.     

Medium-scale traveling ionospheric disturbances (MSTID) modeling using a dense German GPS network

The MSTIDs are wave-like perturbations of the ionospheric plasma, which cause the most common ionospheric disturbances in mid-latitude regions. Generally the MSTIDs have velocities of several hundred meters per second and wavelengths of several hundred kilometers. The wave-like effect of the MSTID is one of the main obstacles for accurate interpolation of ionospheric corrections in a medium-scale reference GPS network. In this paper we show a new method of detecting and modeling MSTIDs using dense German GPS network. The between-epoch single difference ionospheric delays from a medium scale dense GPS network are used to estimate the parameter of the MSTID e.g. amplitude, wavelength and velocity. The efficiency of the approach is tested with data from about 320 GPS stations in and near Germany. A MSTID wave moving from east to west across Germany was observed at September 27 in 2009. Its wavelength is about 302 km, with a period of ∼7 min and velocity of about 700 m/s.     

Prominence Seismology Using Small Amplitude Oscillations

Quiescent prominences can be modeled as thin slabs of cold, dense plasma embedded in the much hotter and rarer solar corona. Although their global shape is rather irregular, they are often characterised by an internal structure consisting of a large number of thin, parallel threads piled together. Prominences often display periodic disturbances mostly observed in the Doppler displacement of spectral lines and with an amplitude typically of the order of or smaller than 2–3 km?s^?1, a value which seems to be much smaller than the characteristic speeds of the prominence plasma (namely the Alfvén and sound velocities). Two particular features of these small amplitude prominence oscillations are that they seem to damp in a few periods and that they seem not to affect the whole prominence structure. In addition, in high spatial resolution observations, in which threads can be discerned, small amplitude oscillations appear to be clearly associated to these fine structure constituents. Prominence seismology tries to bring together the results from these observations (e.g. periods, wavelengths, damping times) and their theoretical modeling (by means of the magnetohydrodynamic theory) to gain insight into physical properties of prominences that cannot be derived from direct observation. In this paper we discuss works that have not been described in previous reviews, namely the first seismological application to solar prominences and theoretical advances on the attenuation of prominence oscillations.