俄罗斯第五代光学侦察卫星

文章主要论述俄罗斯第五代光学侦察卫星(涅曼卫星)的飞行历史,包括发射日期选择,轨道选择和轨道机动、使用和工作寿命等内容。     

红外多光谱扫描仪主体设计

文中简要介绍了中巴合作地球资源卫星(CBERS)红外多光谱扫描仪主体(简称扫描仪主体)的组成和工作原理。     

两相毛细泵环中蒸发器的工作特性的实验研究

在两相毛细泵环的反向式蒸发器初步研究的基础上,对同一蒸发器进行了改进的实验研究,改进措施为:在作为毛细结构的复合金属网上加压一块带有纵向和横向槽道的金属平板。对不同倾角下该蒸发器的工作特性的实验结果进行了分析和比较。     

空间飞行体与等离子体在压缩区内的非稳态相互作用研究

研究了空间飞行体在运动过程中，其前端压缩区内飞行体与等离子体的、非稳态相互作用问题，得到了在强天线辐射源高频场作用下的控制方程．通过计算表明，飞行体上的天线可作为调制不稳定性的激发源，在等离子体中激发起很强的电磁孤波．     

定常对称背涡流态下细长体绕流结构的演变

应用数值计算的方法模拟了细长体截面绕流结构的演变过程.指出随着细长体背涡的发展,导致截面流场的拓扑结构发生变化,会出现一种临界流动状态.并用微分方程的定性理论分析了此时流场中出现的一种高阶奇点.这种高阶奇点的指数为-3/2,它是结构不稳定的,稍有扰动就会产生分叉,使流场的拓扑结构发生变化.得出了定常对称背涡流态下细长体的空间绕流结构图.     

毛细泵环中两相循环回路的初步分析研究

本文初步分析研究了在微重力或失重情况下毛细泵环中两相循环回路的稳态流动，情况，提出了基于力平衡的两相循环回路一维稳态数学描述。从计算结果得出了最佳有效毛细孔半径等结论。     

尖端具有非线性吸附接触的界面裂纹的动态特性研究

 研究一类尖端具有非线性吸附接触型裂纹模型的弹性波散射问题。利用积分变换和积分方程方法推导了确定这类问题基本变量的奇异积分方程组,采用围道积分技术和切比雪夫多项式展开技术得到了待定系数的非线性代数方程组。最后给出了裂纹尖端接触区的大小和接触应力的数值结果,揭示了这种接触型裂纹模型的动力学特征及物理上的合理性。     

地面涡研究

 The formation mechanism and the flow characteristics of the ground vortices as well as the method of eliminating ground vortices are studied in this paper. It is noted that, when air is sucked into an aircraft engine, on the ground a momentum moment is exerted on a point sink flow by a lateral wind or a reversed jet from the tail pipe, resulting in the formation of eddy stream known as ground vortices. Through an analysis of numerous experimental data it is found that the ground vortices are composed of two vortices instead of a single and concentrated free vortex.The tangitial velocity distribution curves of the ground vortex can be expressed as two independent functions: one is a directly proportional function located at the core, and the other is an inversely proportional function around the outer surrounding. The pressure distribution is also composed of two parabolic functions.In addition, a method of eliminating the ground vortices is presented, and it is of important engineering significance to eliminate the ground vortices.     

Discrete-time observability and estimability analysis for bearings-only target motion analysis

Observability in the context of bearings-only tracking (BOT) is still the subject of important literature. Different from previous approaches, where continuous-time analysis was considered, our approach relies on discrete-time analysis. It is then shown that this allows us to use directly and efficiently the simple formalisms of linear algebra. Using the direct approach, observability analysis is essentially reduced to basic considerations about subspace dimensions. Even if this approach is conceptually quite direct, it becomes more and more complex as the source-encounter scenario complexity increases. For complex scenarios, the dual approach may present some advantages essentially due to the direct use of multilinear algebra. New results about BOT observability for maneuvering sources are thus obtained. Observability analysis is then extended to unknown instants of source velocity changes. Even if observability analysis provides thorough insights about the algebraic structure of the BOT problem, the optimization of the observer maneuvers is essentially a control problem. Basic algebraic considerations prove that a relevant cost functional for this control problem is the determinant of the Fisher information matrix (FIM). So, a large part of this work is devoted to the analysis of this cost functional. Using multilinear algebra, general approximations of this functional are given. In order to involve only directly estimable parameters, the source bearing-rates are examined. Using these approximations, a general framework for optimizing the observer trajectory is derived which allow us to approximate the optimal sequence of controls. It is worth stressing that our approach does not require the knowledge of the source trajectory parameters and is still valid for a maneuvering source.