基于偏置比例导引的垂直攻击滑模制导律

为了提高空地导弹毁伤效果,需要对地面固定目标采用大角度乃至垂直打击方式。针对这一需求,设计了一种基于偏置比例导引的垂直攻击滑模制导律。首先在传统的比例导引制导律的基础上增加了一个角度约束偏置项,并结合滑模变结构理论使其滑模变结构化。然后运用自适应滑模趋近律,并采用准滑动模态控制削弱了抖振的影响。仿真结果表明:此制导律控制落角能力较强,同时具有较高的命中精度。整个攻击过程中的弹目视线角速度变化较小,最后以垂直落角攻击目标。     

直驱式电动台钻用开关磁阻电机高效控制

直驱式电动台钻用效率较高的开关磁阻电机(SRM)替换单相感应电机,将钻头直接固定到电机转子的输出端,省去传统台钻的皮带、塔轮等机械传动装置,实现直接驱动。为了实现直驱式电动台钻全转速范围内的无极调速功能,提出起动阶段采用电流斩波控制(CCC)提供大扭矩;低速阶段采用基于正余弦电流分配的方法抑制低速转矩脉动;中高速阶段采用电压斩波控制(CVC)+角度控制(APC)的变角度电压斩波组合控制方式对转速进行调节。从而实现了不同控制模式间的平滑切换的控制策略。试验结果表明:所提出的全转速范围的控制策略效率高、调速性能好,可有效提高电动台钻的性能。     

尾迹对低压涡轮边界层稳定性的影响

在低压涡轮内部上游周期性扫过的尾迹是下游叶片排内最重要的非定常扰动源,会对边界层的失稳和转捩过程产生决定性的影响.在施加低压涡轮负荷分布的平板上,采用热线对雷诺数为130000工况下,有/无尾迹作用时分离剪切层中的速度波动进行了测量.通过对比两种工况下分离剪切层中的扰动发展,分析了尾迹对分离泡稳定性的影响.结果表明:在无尾迹来流工况下,扰动在分离泡前部的增长符合线性不稳定机制,扰动增长至饱和后非线性机制开始起作用.主导分离剪切层的失稳过程的为K-H(Kelvin-Helmholtz)无黏不稳定机制.尾迹与分离剪切层的相互作用产生的扰动的增长在分离泡前部同样满足线性不稳定机制.尾迹加速了分离剪切层的失稳转捩进程,从而抑制了分离.      

Study of mid-latitude ionospheric convection during quiet and disturbed periods using the SuperDARN Hokkaido radar

Westward ionospheric convective flows around midnight are frequently observed at mid-latitudes. They can be generated by so-called disturbance dynamo mechanisms working mainly in the mid-latitudes. To understand the influence of disturbance dynamo effects in the mid-latitudes, we studied the latitudinal distribution of westward flows in association with several kinds of geomagnetic disturbances using the SuperDARN Hokkaido radar. This radar creates high temporal resolution (1 s to 2 min), two-dimensional observations measuring the line-of-sight velocities of ionospheric plasma irregularities, which can be regarded as line-of-sight velocities of ionospheric convection in the mid-latitude region from 40° to 50°. This region could not be monitored using preexisting SuperDARN radars. In this study, we used ionospheric echo data obtained by the SuperDARN Hokkaido radar over 5 years (December 2006 to November 2011). We identified westward flows around midnight at about 40° to 55° geomagnetic latitude. Additionally, the data showed that the westward flow around midnight intensified under high geomagnetic activity (high Kp). This suggests that the disturbance dynamo could affect the mid-latitude ionospheric convection. We performed Superposed Epoch Analysis (SEA) to study the influences from the geomagnetic disturbances on mid-latitude ionospheric convection. We found no obvious influence during major storms (minimum Dst below −60 nT). SEA was also used to study the temporal and latitudinal dependence on the influences from substorms. From analysis of 36 events of AL-defined substorms, we saw that the influence of substorms lasted from 5 to 20 h after the onset between 44° and 53° geomagnetic latitude. The westward flow at mid-latitude grew to a maximum at 12 h after the geomagnetic substorm onset. This is consistent with the results of past numerical simulation studies of the disturbance dynamo effects.     

霍尔磁强计温度特性校准装置的研究

本文从霍尔元件的基本物理性能出发分析霍尔磁强计的哪些参数与温度有关,确定温度系数和零点温漂是影响霍尔磁强计特定温度下准确度的关键性参数,根据其工作原理开展了校准装置和校准方法的研究,本文阐述了这两套装置的工作原理和组成,并通过试验验证装置的测量能力。     

基于带宽优化的载波跟踪算法

在现有的高动态微弱信号的载波跟踪算法中,针对锁频环(FLL)辅助锁相环(PLL)载波跟踪算法,环路调整不连续,易出现跟踪失锁的问题,给出了FLL与PLL的更优组合算法,并确定了组合环路状态转换的过程以及环路状态转换的门限值,从而优化环路性能;针对带宽调整不准确影响环路跟踪性能的问题,分析得出最优带宽值,确定了试探法带宽调整策略,对环路带宽进行实时调整,最终在信噪比为3dB,且存在加加速度分量时,环路的跟踪误差达到3Hz左右.      

含孔隙基体缎纹编织复合材料面内压缩弹性性能预报

缎纹编织复合材料细观结构复杂,传统弹性性能预报方法较难适用。针对该问题,建立缎纹编织复合材料代表体积单元(RVE),对RVE模型面内压缩弹性模量和面内泊松比的预报方法进行了研究。分别基于能量法原理和单夹杂理论,对弯曲纤维束纵向压缩模量和含孔隙基体弹性性能进行预报,改进了传统细观力学中的混合率方法,并利用已得的组分材料性能对RVE模型有效面内压缩模量和面内泊松比实现了解析法预报。基于Python语言对ABAQUS有限元分析软件进行二次开发,建立了基体含孔隙的RVE模型,利用RVE模型在基本受力状态下的有限元方法结果实现有效面内压缩模量和面内泊松比的有限元方法预报。基于碳/碳复合材料,解析法与数值法计算结果吻合很好,实现了对缎纹编织材料面内压缩性能的有效预报。      

Advanced receiver autonomous integrity monitoring (ARAIM) schemes with GNSS time offsets

Within the current Advanced Receiver Integrity Monitoring (ARAIM) scheme, the time offsets between different Global Navigation Satellite System (GNSS) constellations are estimated along with a position solution and the GNSS receiver clock error. This scheme is called the Time-offsets Estimated ARAIM, or the TOE ARAIM. In order to enhance the interoperability and compatibility between different constellations, the time offsets are expected to be broadcast to users in future multi-GNSS positioning and navigation applications. This paper describes two new ARAIM schemes to make use of the Broadcast Time Offsets (BTOs): Time Offset Observed ARAIM (TOO ARAIM) and Time Offset Synchronized ARAIM (TOS ARAIM). It has been shown that the VPL performances of these two new ARAIM schemes rely strongly on the accuracy of BTOs. By varying the error model of the BTOs, the simulation results also demonstrate that the proposed new TOO ARAIM scheme can outperform the existing TOE ARAIM scheme-even if the accuracy of BTOs for integrity is degraded to 4.5 m and the probability of a BTO fault is relaxed to 10⁻² h⁻¹. In addition, the new Time Offset Synchronized ARAIM scheme (TOS ARAIM) can also perform better than the existing TOE ARAIM scheme if the accuracy of BTOs for integrity can reach 0.75 m. As the TOO ARAIM also has a very relaxed requirement on BTOs and better VPL performance, the TOO ARAIM is regarded as a superior ARAIM scheme for multi-GNSS with BTOs available.     

整体叶盘抛光技术的研究现状及发展趋势

整体叶盘的表面质量和型面精度对航空发动机的气流动力性和使用性能影响巨大,而抛光是保证整体叶盘最终表面质量及型面精度的关键技术。针对目前国外对整体叶盘抛光技术及装备的严格保密、国内整体叶盘的抛光仍然广泛采用人工打磨的现状,对整体叶盘的抛光技术研究现状及发展趋势进行归纳总结,为整体叶盘的抛光及其自动化的发展提供参考。首先,概述了整体叶盘抛光加工的必要性及其重要性,分别从整体叶盘结构特性、材料特性和曲面特性等方面分析了整体叶盘的抛光工艺,并介绍了整体叶盘抛光工艺要求。然后,就整体叶盘磨料流加工、电解加工、砂带抛光等方面概述了国内外整体叶盘抛光技术及装备的研究现状,在此基础上提出了制约整体叶盘型面抛光技术发展的关键问题及其研究内容和解决方案。最后,根据整体叶盘的技术现状及核心关键问题指出了整体叶盘抛光技术的发展趋势。