An innovative study on low surface energy micronano coatings with multilevel structures for laminar flow design

Laminar flow design is one of the most effective ways to reduce the drag of a commercial aircraft by expanding the laminar flow region on the surface of the aircraft. As material science develops, the emergence of new materials such as low surface energy materials has offered new choices for laminar flow design of commercial aircraft. Different types of low surface energy micro-nano coatings are prepared to verify the effects on the boundary layer transition position and the drag of the airfoil through wind tunnel tests. The infrared thermal imaging technology is adopted for measuring the boundary layer transition, while the momentum integral approach is employed to measure the drag coefficient through a wake rake. Infrared thermal imaging results indicate that the coatings are capable of moving backward the boundary layer transition position at both a low velocity of Mach number 0.15 and a high velocity of Mach number 0.785. Results of the momentum integral approach demonstrate that the drag coefficients are reduced obviously within the cruising angle of attack range from 1° and 5° by introducing the low surface energy micro-nano coating technology.     

甲醇超临界水完全气化制氢系统的火用分析

基于热力学火用平衡方程所揭示的实际用能过程和理想用能过程,通过引入"偏离值"、"偏离度"两个指标,对甲醇超临界水制氢系统进行了火用分析。首先确定了加热和反应环节为重点优化环节;然后研究了此二环节的"偏离度"分别随压力、温度的变化规律,并比较了压力和温度对"偏离度"的影响作用大小。在提高甲醇制氢系统的能质利用率方面进行了有益的探讨,其结论对制氢系统的节能工作具有一定的参考价值。     

中国对外贸易与航空运输的关系测度研究

中国对外贸易长期快速持续增长,在国际市场上的比重逐年增加,恰值中国民航业的发展正处于迅猛成长期。对外贸易的发展对航空运输有直接或间接的重要影响,货物贸易的增长对航空货运需求增加,国际交流频繁也促进了航空客运的发展。基于国际贸易的动态效应理论,通过选取1982—2011年的时间序列数据,对进出口贸易总额与航空运输总周转量间的关系进行格兰杰因果检验,并构建了对外贸易与航空运输增长之间的有限分布滞后模型。分析结果表明:对外贸易与航空运输增长之间存在因果关系,其中对外贸易对航空运输增长的贡献度为0.28。     

Effects on winter circulation of short and long term solar wind changes

Indices of the North Atlantic Oscillation and the Arctic Oscillation show correlations on the day-to-day timescale with the solar wind speed (SWS). Minima in the indices were found on days of SWS minima during years of high stratospheric aerosol loading. The spatial distribution of surface pressure changes during 1963–2011 with day-to-day changes in SWS shows a pattern resembling the NAO. Such a pattern was noted for year-to-year variations by Boberg and Lundstedt (2002), who compared NAO variations with the geo-effective solar wind electric field (the monthly average SWS multiplied by the average southward component, i.e., negative Bz component, of the interplanetary magnetic field). The spatial distribution of the correlations of geopotential height changes in the troposphere and stratosphere with the SWS; the geo-effective electric field (SWS∗Bz); and the solar 10.7 cm flux suggests that solar wind inputs connected to the troposphere via the global electric circuit, together with solar ultraviolet irradiance acting on the stratosphere, affect regional atmospheric dynamics.     

圆柱度仪系统误差的验证分析及消除

介绍了在使用MMQ400圆柱度仪测量高精度圆柱度时,通过对不同测量方法的测量数据差异对比及分析,验证测量系统误差对测量的影响,并提出消除系统误差的方法.     

Avoid online radiation risk: Theoretical simulation of chromosome breaks in cells exposed to heavy ions

In this study, we report an easy and quick method on simulating chromosome breaks in cells exposed to heavy charged particles. The theoretical value of chromosome break was calculated, and validated comparison with experimental value by using premature chromosome condensation technique. A good consistency was found between theoretical and experimental value. This suggested that higher relative biological effectiveness of heavy ions was closely correlated with its physical characteristics. Also, a safe approach on predicting chromosome breaks in cells exposed to heavy ions at off-line environment can be considered. Furthermore, three key factors influencing the theoretical simulation was investigated and discussed.     

EPDM包覆层热解状态下的力学行为及本构模型

为了准确描述固体火箭发动机三元乙丙(EPDM)包覆层在不同热解状态下的力学特性,通过热重分析的方法得到EPDM的热解温度范围,并采用准静态单轴拉伸实验的方法获得EPDM在不同热解温度下的应力-应变曲线。以Ogden(n=2)模型为基础,分别对不同热解状态下的力学曲线进行建模,并通过对实验数据的拟合获得模型参数。结果表明,在初始热解状态下,材料只发生了少量的失水和气体的逃逸,其力学行为可通过粘超弹本构模型进行描述;随着材料热解程度增加,基体材料和填充纤维均遭到破坏,其力学行为表现为超弹脆性材料特性。     

自动导引车在工业4.0 中的应用

随着工业4.0概念的逐步成熟,智能化工厂、智能化生产以及智能化物流将是未来很长一段时间的发展模式,传统的制造企业会面临智能化的升级和转型.在此背景下,从提高工业化生产自动化程度的角度入手,在生产流水线中引入自动导引车.然后针对每一种导航方式分析其优缺点,并且结合现代化生产方式的特点,通过对具体的应用案例进行分析,从原理上重点阐述了激光导引的情况,同时分析了自动导引车(AGV)的发展趋势,为企业后续在选择适合自身特点的自动导引车方面提供了参考.     

MSG-3在民用航空器维修大纲制定中的应用

国内民用航空器的研发起步较晚,目前投入运行的国产航空器型号种类和数量都不多,航空器制造厂家在制定维修大纲方面的经验较少.本文对国际上通行的MSG-3维修任务分析方法进行研究,首先介绍MSG-3维修任务分析方法产生和发展的历史背景,以及其在国内民机型号中的应用;然后详细叙述MSG-3维修任务分析方法(包括航空器系统、动力装置维修任务的分析方法,结构检查和区域检查任务的分析方法,以及形成维修大纲的流程和维修任务的后期优化);最后通过对航空器型号的审查经验,总结我国民用航空器制造厂家在制定航空器维修大纲时存在的问题和改进方向.     

基于模型的系统工程概述

由于航空领域涉及的系统日益高度复杂,为更好推进基于模型的系统工程(Model Based System Engineering,MBSE)研发体系,通过从当前遇到的问题、推行基于模型的系统工程的必要性、优势、未来的挑战等方面进行了较为详细地阐述.基于模型的系统工程研发体系具有知识表示的无二义、系统设计的一体化、沟通交流的高效率等优势,是未来发展的大趋势.