径向圆跳动误差的最小二乘评定数学模型和微机数据处理

用传统的测量方法只能得到被测零件的径向圆跳动误差的近似值。为了得到该项误差的准确值，需要研究新的测量方法。建立了径向圆跳动误差最小二乘评定数学模型，并编制了高级语言数据处理程序。在万能工具显微镜上获得了采样数据，给出了计算结果。     

Intrinsic time scale for reconnection on the dayside magnetopause

Recently much attention has been focused on the transient behavior of the magnetopause in response to pressure pulses and southward fluctuations of the interplanetary magnetic field. We examine the motion of the magnetopause behind the foreshock and conclude that this motion is affected by foreshock pressure variations but not by fluctuations in the direction of the magnetic field. Neither magnetopause erosion nor flux transfer event occurrence is controlled by the foreshock. On the contrary, flux transfer events occur at times of steady IMF and thier quasi-periodic behavior is controlled by the magnetopause or the magnetosphere and is not driven by the external boundary conditions. Since flux transfer events are clearly due to reconnection, this observation implies that the IMF must be southward some time perhaps as long as 7 minutes before flux transfer begins.     

采用DSG技术实现零件模型分解

针对回转体和箱体类零件模型,应用分解性实体几何技术实现零件设计模型到制造模型的有序分解,介绍了基于特征树模型的两个关键算法:宽度优先和深度优先搜索,以完成面向特征加工过程的空间和时间域内的制造过程规划.最后用一个详细的算例进一步陈述零件模型分解技术.     

Balloon altitude studies of southern hemisphere hard X-ray sources by the Imperial College-University of Tasmania-INPE collaboration

Hard X-ray balloon altitude measurements with a 1600 cm² phoswich array are described. Data from observations on Sco X-1, GX1+4, GX5−1, Nova Oph. 1977, SMC X-1, SS433, IC 4329A and MR 2251-178 are presented. The role of Comptonisation in X-ray production for Sco X-1 and GX1+4 is discussed.     

The 2.5 to 5 microns spectrum of comet Halley from the IKS instrument of Vega

Results of the 2.5–5 micron spectroscopic channel of the IKS instrument on Vega are reported and the data reduction process is described. H₂O and CO₂ molecules have been detected with production rates of 10³⁰ s⁻¹ and 1.5 10²⁸ s⁻¹ respectively. Emission features between 3.3 and 3.7 microns are tentatively attributed to CH - bearing compounds - CO is marginally detected with a mixing ratio CO/H₂O 0.2. OH emission and H₂O - ice absorption might also be present in the spectra.     

小功率电弧等离子体发动机实验数据采集系统

介绍了小功率电弧等离子体发动机的实验装置及数据采集系统,阐述其结构组成及工作过程,重点介绍了发动机工作推力、电流和电压的测量原理,并对数据采集系统的硬件配置、性能及软件的编制的原则、方法作了主要说明,给出典型实验所测结果.测量结果准确反映了实验工作过程.      

制孔工艺对7075铝合金孔表面完整性的影响

从表面完整性角度研究了5种制孔工艺对7075铝合金板材紧固孔表面加工质量的影响,通过对不同种工艺所产生的紧固孔表面粗糙度、残余应力和显微硬度进行检测和比较,发现钻扩铰多步慢进给工艺和钻扩铰一步复合制孔工艺所达到的表面完整性指标优于其它加工工艺.另外分析了影响孔加工质量的因素,证明了一步复合制孔工艺是一种先进、快捷的高质量制孔方法.     

塞式喷管三维流场的数值模拟

从曲线坐标下的三维平均雷诺的N-S方程出发,并用k-ε两方程湍流模型封闭方程组,采用二阶精度的精度无波动、无自由参数的耗散差分格式(NND格式),发展了模拟塞式喷管三维流场的数值程序,并对线性塞式喷管和瓦状塞式喷管在不同落压比下的三维流场进行了数值模拟研究.结果较好地预示了塞式喷管的三维流场特征,并且显示瓦状塞式喷管除了圆柱形结构比平板更能承载外,其塞锥压强分布可以进一步改善其受力情况.     

含通孔损伤变截面钛合金蜂窝壁板拉伸性能研究

针对飞行器结构采用的钛合金蜂窝壁板,采用试验研究和有限元分析相结合的方法,研究了通孔损伤对变截面钛合金蜂窝壁板拉伸性能的影响.其中,有限元模型采用参数化建模方法建立,包含蜂窝芯体细节和斜角区细节结构.研究结果显示,斜角区是变截面钛合金蜂窝壁板的薄弱部位,无损伤试验件的破坏模式为沿斜角起始区域内蒙皮倒圆处横截面断裂;对于...     

静稳定裕度对飞翼布局的影响研究

减小配平损失对于提高飞翼布局升阻比和提升飞行控制能力具有重要意义,因此基于离散伴随优化方法研究静稳定裕度对跨音速飞翼布局减阻优化的影响,分别开展10%,0%,-10% 三种静稳定性设计工况的优化研究。采用自由变形（FFD）方法对非结构表面网格进行参数化,以FFD 控制点为设计变量,通过求解流场和伴随方程得到灵敏度信息;采用序列二次规划SQP 算法获得控制点位移的梯度,然后经过多轮迭代得到优化构型。结果表明：在几何厚度和力矩配平的约束下,离散伴随优化方法可以显著提升飞翼布局的最大升阻比,三种工况下最大升阻比提高都在8% 以上;随着静稳定性裕度减小,定升力系数优化的巡航升阻比增量有所减小,当静稳定裕度为10% 时巡航升阻比提高了5.08%。