The evolution of mirror type magnetic fluctuations in the magnetosheath based on multipoint observations

Two orbits were selected in January–February 2006 when the separation between the Cluster spacecraft was large and mirror type magnetic field fluctuations were observed by all spacecraft in different regions of the terrestrial magnetosheath. Minimum variance analysis was applied to find the mirror type fluctuations, and the amplitude of the fluctuations was determined individually. Mirror mode structures are moving along the streamlines frozen in the plasma. A model was developed for the calculation of plasma flowtime from the bow shock to the observation point. The growth rate of the field strength perturbations was estimated by comparing the amplitudes of fluctuations observed simultaneously at distant locations (∼10,000 km) based on the assumption that δB ∼ exp(γt). The obtained growth rate values were about an order of magnitude smaller than those provided by linear models and they decreased in the inner regions of the magnetosheath, indicating some saturation in the growth of the waves when proceeding towards the magnetopause. The results of these two case studies suggest that mirror type fluctuations originate from the compression region downstream of the quasi-perpendicular bow shock, and the growth of the fluctuations cannot be described by linear approximations.     

Testing the Stability of the Fine Structure Constant in the Laboratory

In this review we discuss the progress of the past decade in testing for a possible temporal variation of the fine structure constant α. Advances in atomic sample preparation, laser spectroscopy and optical frequency measurements led to rapid reduction of measurement uncertainties. Eventually laboratory tests became the most sensitive tool to detect a possible variation of α at the present epoch. We explain the methods and technologies that helped to make this possible.     

Parametric Methods for Strip-Map SAR Doppler Ambiguity Resolution

Physical modeling of the Doppler centroid (DC) can be used to predict synthetic aperture radar (SAR) Doppler ambiguity when antenna attitude is controlled or measured precisely enough. It is shown that the same model proves useful even in the cases of higher attitude uncertainty, if it is combined with suitable adaptive techniques. In this paper, Doppler ambiguity resolution is formulated as a hypothesis testing problem over a domain of integer values that are directly related to the attitude uncertainty. A test statistic is derived from the entire SAR scene using data adaptive processing. A broad class of such adaptive algorithms is analyzed in a unified way, starting from the range-azimuth coupling in the frequency domain and multilook techniques. The analysis includes two well-known and two new multilook methods for Doppler ambiguity resolution. A suitable test statistic is proposed for each of these methods and its dependency on the scene spatial correlation is discussed. Experimental results confirm the robustness of the combined scheme.     

Improved Accuracy Metallic Resonator CVG

Metallic resonator Q-factor is very sensitive to the resonator's material, its thermal and chemical treatment, design, and environment; i.e., pressure and temperature. In order to obtain higher accuracy for CVG it is necessary to use resonator evacuation. Resonator mass plays a very important role in sensitivity to angle rate, in stability of vibration, in response to environmental condition changes, and also to external vibration and shock resistance. tnnalabs Holding Inc. uses a cylindrical resonator with increased rim thickness of up to 2 mmn and more. This concerns resonator material and design parameters selection, material thermal treatment to increase resonator Q-factor, and improved control algorithms in order to increase metallic CVG accuracy. As a result, CVG bias instability of 0.025 degth and random walk of 0.008 degvh for the resonator diameter 43 mmn, and 0.2 deg/h for the resonator diameter 25 mm were obtained. Future opportunities for Innalabs CVG is also discussed herein. Test results are presented for CVG43 and CVG25. Three-axis CVG unit under control of one DSP "Sharc" and IMU parameters are forecasted.     

A technique for selecting a rational variant of a multifunctional aircraft system

A technique for selecting a rational variant of a multifunctional aircraft system using the analytic hierarchy process is proposed and a solution of a practical problem is presented.     

Relativistic electrons high doses at International Space Station and Foton M2/M3 satellites

The paper presents observation of relativistic electrons. Data are collected by the Radiation Risk Radiometer-Dosimeters (R3D) B2/B3 modifications during the flights of Foton M2/M3 satellites in 2005 and 2007 as well as by the R3DE instrument at the European Technology Exposure Facility (EuTEF) on the Columbus External Payload Adaptor at the International Space Station (ISS) in the period February 20 – April 28, 2008. On the Foton M2/M3 satellites relativistic electrons are observed more frequently than on the ISS because of higher (62.8°) inclination of the orbit. At both Foton satellites the usual duration of the observations are a few minutes long. On the ISS the duration usually is about 1 min or less. The places of observations of high doses due to relativistic electrons are distributed mainly at latitudes above 50° geographic latitude in both hemispheres on Foton M2/M3 satellites. A very high maximum is found in the southern hemisphere at longitudinal range 0°–60°E. At the ISS the maximums are observed between 45° and 52° geographic latitude in both hemispheres mainly at longitudes equatorward from the magnetic poles. The measured absolute maximums of dose rates generated by relativistic electrons are found to be as follows: 304 μGy h⁻¹ behind 1.75 g cm⁻² shielding at Foton M2, 2314 μGy h⁻¹ behind 0.71 g cm⁻² shielding at Foton M3 and 19,195 μGy h⁻¹ (Flux is 8363 cm⁻² s⁻¹) behind les than 0.4 g cm⁻² shielding at ISS.     

Development of an Italian low cost GNSS/INS system universally suitable for mobile mapping

The first studies for the mobile mapping and creation of a vehicle for this kind of research was carried out by Canadian Researchers in the 1980s. Since then, these vehicles have been widely employed in several applications (road cadastre maps, terrestrial photogrammihetry, road sign recognition, etc.) for both commercial and research purposes throughout the world. Many GNSSIINS vehicles which can be equipped in different ways with one or more GPS, inertial sensors, and one or several cameras, have been realized. A characteristic shared by most of these devices concerns the high costs of the sensors, of the realization and of the maintenance. For this reason, a GNSSIINS system, that is suitable for any vehicle, made up of low cost devices (two GPS receivers, an INS, and a camera rigidly placed on a metallic bar), has been designed and built by our research group. Two tests run at different velocities have been carried out to evaluate the reliability of the system. After a presentation of the system, the differences that were witnessed during the application of these calibration methods are explained herein.     

Investigating Earth’s Atmospheric Electricity: a Role Model for Planetary Studies

The historical development of terrestrial atmospheric electricity is described, from its beginnings with the first observations of the potential gradient to the global electric circuit model proposed by C.T.R. Wilson in the early 20th century. The properties of the terrestrial global circuit are summarised. Concepts originally needed to develop the idea of a global circuit are identified as “central tenets”, for example, the importance of radio science in establishing the conducting upper layer. The central tenets are distinguished from additional findings that merely corroborate, or are explained by, the global circuit model. Using this analysis it is possible to specify which observations are preferable for detecting global circuits in extraterrestrial atmospheres. Schumann resonances, the extremely low frequency signals generated by excitation of the surface-ionosphere cavity by electrical discharges, are identified as the most useful single measurement of electrical activity in a planetary atmosphere.     

DEMETER Observations of EM Emissions Related to Thunderstorms

The paper is related to specific emissions at frequency <3 MHz observed by the low altitude satellite DEMETER in relation with the thunderstorm activity. At its altitude (～700 km), the phenomena observed on the E-field and B-field spectrograms recorded by the satellite are mainly dominated by whistlers. Particular observations performed by DEMETER are reported. It concerns multiple hop whistlers and interaction between whistlers and lower hybrid noise. Two new phenomena discovered by the satellite are discussed. First, V-shaped emissions up to 20 kHz are observed at mid-latitude during night time. They are centered at the locations of intense thunderstorm activity. By comparison with VLF saucers previously observed by other satellites in the auroral zones it is hypothesized that the source region is located below the satellite and that the triggering mechanism is due to energetic electrons accelerated during sprite events. Second, emissions at frequency ～2 MHz are observed at the time of intense whistlers. These emissions are produced in the lower ionosphere in probable relation with Transient Luminous Events (TLEs).