A method of estimating GPS instrumental biases with a convolution algorithm

This paper presents a method of deriving the instrumental differential code biases (DCBs) of GPS satellites and dual frequency receivers. Considering that the total electron content (TEC) varies smoothly over a small area, one ionospheric pierce point (IPP) and four more nearby IPPs were selected to build an equation with a convolution algorithm. In addition, unknown DCB parameters were arranged into a set of equations with GPS observations in a day unit by assuming that DCBs do not vary within a day. Then, the DCBs of satellites and receivers were determined by solving the equation set with the least-squares fitting technique. The performance of this method is examined by applying it to 361?days in 2014 using the observation data from 1311 GPS Earth Observation Network (GEONET) receivers. The result was crosswise-compared with the DCB estimated by the mesh method and the IONEX products from the Center for Orbit Determination in Europe (CODE). The DCB values derived by this method agree with those of the mesh method and the CODE products, with biases of 0.091?ns and 0.321?ns, respectively. The convolution method's accuracy and stability were quite good and showed improvements over the mesh method.     

双燃式冲压发动机中超燃燃烧室冷态流场数值模拟

采用Ｍａｃ Ｃｏｒｍ ａｃｋ 矢通分裂格式, 求解雷诺平均的Ｎ－Ｓ方程组, 采用Ｂａｌｄｗ ｉｎ－Ｌｏ－ｍ ａｘ 代数湍流模型和混合长度模型, 模拟超燃燃烧室内两股平行超声速来流的冷态流场, 取得了与试验相一致的结果, 计算表明回流区和射流流动参数对超燃燃烧室流场内波系的变化有着较大的影响。     

地下原油无缆电加热系统可靠性措施的计算机仿真与优化决策

本文根据给定的油井地质资料,用计算机对其进行拟合再现,着重讨论了井下原油无缆电加热系统的可靠性措施及其计算机仿真与优化决策方法。     

基于神经网络的机械加工信息融合

概述了基于神经网络的信息融合技术在机械加工中的刀具状态监控、加工精度预测、误差补偿等方面的应用,并展望了该技术的应用前景。     

Single-phase three-level rectifier and random PWM inverter drives

A novel ac/dc/ac converter topology with three-level pulsewidth modulated (PWM) scheme for the single-phase ac/dc rectifier and random PWM scheme for ac drives is proposed. In order to improve the power quality in the single-phase rectifier, a ROM-based (read-only memory) control scheme, based on hysteresis current comparator, region detector, and capacitor compensator, is used to achieve a sinusoidal line current with low current distortion. The control scheme of the adopted three-level rectifier is easy to implement. The blocking voltage of power switches is clamped to half of the dc bus voltage. To reduce the mechanical vibration from an induction motor, random pulse position PWM scheme is adopted to spread the harmonics in a wide frequency range which results in the reduction of torque pulsation in the ac motor drives. Simulation and experimental results based on the laboratory prototype circuit are presented to verify the proposed control scheme     

分析计算航天飞机气动系数的边界元局部方法

空间运载工具设计阶段为分析比较不同外形高超音速各流动领域的性能,广泛应用局部方法。在其原始形式下,形状函数计算繁复,并限于简单几何外形组成的轴对称体。用边界元局部方法进行形状函数计算,可免去原局部方法面积分的繁复和藉助表格的局限。对STS-1轨道飞行器外形进行计算得到丁形状函数,并根据实验数据确定领域系数。由此计算出飞行器的法向力、轴向力和俯仰力矩系数,计算结果与实验数据相符。     

起落架双腔缓冲器初始压力的优化设计

本文提出并讨论了起落架双腔缓冲器的初始压力优化设计问题,给出了分析模型与方法。国产某运输机起落架改双腔的算例表明,该模型与方法是可行的。     

卫星表面材料物性与电荷积累

卫星表面在地磁亚暴环境下积累电荷的现象是必然的。由于表面间物性的差别,这种积累将是不均衡的,然而一旦建立了电势差,那末表面与表面,表面与构架间就会存在电荷交换,使电势差逐渐趋于减小。文章试图通过物理模型的建立,由此推导出面间电势差变化与表面电势值及表面的电导、电容的关系,从而建立一种明确的数学模型,以利卫星表面充电状态的分析。     

轮胎自控测温系统的研制

飞机在起飞、着陆、滑行时,因吸收动能等导致胎体温度的升高,使胎面胶发粘、脱落、掉块,严重时扒皮,缩短使用寿命;甚至造成爆胎事故。 在模拟试验后,逐渐趋于静止状态时,对胎冠、胎肩、胎侧缓冲层进行温度测量,观察并研究其变化,为设计和使用提供了可靠依据。     

枝晶生长中的对流效应与形态选择——地基实验研究

通过在生长界面前区域创生液相流动,研究了在稀薄合金中对流对强制性枝晶生长的作用。本文首次报告了对流对强制性枝晶生长的影响。SCN—Acc.模型合金中的定量实验表明,枝晶生长的动力学和形态是温度梯度、生长速度和枝晶端前沿液体流动速度的函数。作为以地面为基础的实验研究,将有助于理解太空凝固试验的结果。