攻角传感器的热失效分析与设计方案改进

根据压差归零式攻角传感器的工作原理、结构及工作条件，结合实际经验，分析了该传感器的主要失效因素，并重点分析了热失效问题；探讨了飞行中传感器探头加热器与环境之间的热交换情况。     

飞机穿越烟气流场的响应计算与分析

本文把烟气流作为一种人为的风切变场,分析和计算了烟气流的抬升夹卷模式,讨论了飞机对称穿越烟气流场时的响应。可为电厂和机场的相关设计提供参考依据。     

小批量工序控制的研究

Shewhart工序控制图的实施是基于大量数据的统计规律性。在小批量工序控制场合,这种常规工序控制技术失效。小批量工序控制已有的控制技术有:目标图,比例图。前者要求所组合各类数据的方差相同;后者则要求所组合的各类数据的期望和方差成比例。这严格限制了目标图和比例图的使用范围。本文研究小批量工序控制的统计原理和实现方法。首先提出小批量数据组合的同分布原理;研究实现这一原理的标准变换方法,建立小批量标准变换控制图,并通过仿真分析评价标准变换图的有效性和检出能力。并对标准变换图进行实证分析;最后指出进一步研究的问题。     

小展弦比飞机非线性气动特性风洞与飞行相关性研究

在较大迎角范围，如何由风洞试验数据预计全尺寸小展弦比飞机的非线性气动特性，并与飞行值相关，始终是国际航空界致力解决的重大问题，本项研究采用风洞试验与工程计算相结合的方法，对支架，洞壁、进气，喷流，雷诺数及静弹性等影响相关性的诸因素予以修正，并计及配平影响，从而比较准确地预计出全尺寸收音机的非线性气动特性，预计值与试飞值相比较结果验证了本项研究的可靠性和实用性。     

浅析ISO9000：2000族标准

简要介绍了ISO9000：3000簇质量管理体系标准修订的基本情况，分析了修订的基本原则，阐述了与1994版比较的主要特征和内容变化。     

弹簧杆校正原理及其在力矩控制系统中的应用

 为了掌握自动飞行器的工作特性,在它飞上空中之前,工程技术人员要在地面进行各种仿真试验。研制力矩控制系统的目的在于模拟随高度、速度变化且连续作用在飞行器翼面上的气动铰链力矩。这种装置广泛应用于各种型号舵机。 我们研制的力矩控制系统力案如图1所示。     

非线性动力响应分析的双θ法

本文在二次加速度插值模式的基础上,提出了动力响应分析的双θ法及加权平均法。这两个方法,加速度的截断误差(精度)是O(△t~(3)),是无条件稳定的,有较好的人工阻尼性质,没有超越现象。比现有的逐步积分法有明显的优点。     

On ionospheric aerodynamics

This paper presents theoretical methods to determine the gas dynamic and the electrostatic effects due to the interaction caused by a rapidly moving body in the ionosphere. The principles of the methods are derived from the kinetic theory of collision-free plasma. It is shown that the collective behavior of the collision-free plasma makes it possible to use the fluid approach to treat the problems of ionospheric aerodynamics. Various solutions to the system of fluid and field equations that have direct bearing on the ionospheric aerodynamics are presented and discussed. Physical significances of the mathematical results are stressed. Some outstanding unsolved problems in ionospheric aerodynamics are elaborated and discussed.     

Telerobotics: problems and research needs

With major emphasis on simulation, a university laboratory telerobotics facility permits problems to be approached by groups of graduate students. Helmet-mounded displays provide realism; the slaving of the display to the human operator's viewpoint gives a sense of `telepresence' that may be useful for prolonged tasks. Using top-down 3-D model control of distant images allows distant images to be reduced to a few parameters to update the model used for display to the human operator in a preview model to circumvent, in part, the communication delay. Also, the model can be used as a format for supervisory control and permit short-term local autonomous operations. Image processing algorithms can be made simpler and faster without trying to construct sensible images from the bottom. Control studies of telerobots lead to preferential manual control modes and, in this university environment, to basic paradigms for human motion and thence, perhaps, to redesign of robotic control, trajectory path planning, and rehabilitation prosthetics. Speculation as to future industrial drives for this telerobotic field suggests efficient roles for government agencies such as NASA