高负荷弯掠叶片力学模型与应力抑制研究

几何构型对叶片应力的影响规律是高负荷弯掠叶片应力优化的关键。建立了带有弯掠与扭曲结构特征参数的叶片力学模型,研究了掠形与扭转构型对叶片应力分布的影响。结果表明:弯掠造成的附加弯矩与叶型截面形心位置紧密相关,弯曲应力极值可能出现在叶型前缘、尾缘和叶背中部三个区域;扭转造成的附加扭矩的大小由叶尖到叶根逐渐增加,在叶片自然扭曲率较小时,附加扭矩为负方向,其作用致使叶片解扭;对于典型弯掠叶片,其离心力作用下的径向力载荷决定着自身的截面平均应力水平,而附加弯矩和扭矩载荷决定着截面的应力分布形式。在给定的叶型条件下,可通过掠形方式的调整使附加弯矩与扭矩相抵消,降低叶片峰值应力30%以上。     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

商用飞机驾驶舱造型设计特征研究

介绍了国内外商用飞机驾驶舱设计的历史及现状,在分析多类飞机驾驶舱造型设计图片资料的基础上,探讨主要飞机制造商驾驶舱造型设计的特征。依据驾驶舱造型的相似性,对国际上12家商用飞机制造商的66款机型的驾驶舱进行聚类分析和多维尺度分析,挑选出10款有代表性的驾驶舱。在提取代表性驾驶舱造型特征线后,分析主要飞机制造商的驾驶舱造型设计特点及差异,为新型飞机驾驶舱造型设计提供参考。     

3He原子磁强计技术

~3He原子磁强计利用~3He核自旋的拉莫尔进动测量磁场,具有高精度、小体积等特点,可以满足未来网络化磁异常探测对高性能磁强计的需求。围绕~3He原子磁强计的技术特点,重点介绍了该磁强计的基本工作原理及其硬件组成,分析了其理论灵敏度,给出了该磁强计的国内外研究情况,最后对该磁强计技术的未来发展进行了展望。     

美国NASA的适航气动研究及启示

飞机适航管理是以民用航空器为对象的强制性、法规性和技术性飞行安全管理。简述美、欧等世界航空大国飞机适航管理及适航规章;研究美国NASA在飞机适航领域开展的气动研究工作;探讨我国国家空气动力试验机构服务于适航工作的途径。     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

基于非线性气动力的飞机飞行载荷计算

为了研究气动力非线性对飞机静气动弹性特性及飞行载荷的影响,发展了一种基于非线性气动力的飞机静气弹及飞行载荷计算方法。通过引入CFD计算结果,实现对线性方法中的气动力影响系数矩阵的非线性修正,采用模态法求解静气弹配平方程得到飞机非线性的气弹变形及飞行载荷。以某翼身组合体构型为计算算例,分别针对刚性模型和柔性模型,基于非线性气动力完成了飞机静气动弹性分析及载荷计算,并与线性结果进行了对比分析。结果表明,非线性方法可对大迎角范围内飞机静气弹变形及飞行载荷做出较合理的预测。     

一种临近空间升浮一体飞行器气动布局设计研究

应用理论方法和数值模拟方法开展升浮一体太阳能无人机气动布局设计研究,通过优化选形设计获得高升阻比气动布局,对比两种方法的计算结果以及分析存在差别的原因;应用张线天平支撑风洞试验测试技术,对设计布局开展实验验证研究,建立大展弦比的双机身气动布局风洞试验测试方法,分析了不同雷诺数下实验模型的纵向和横向气动特性影响。研究结果表明:风洞试验结果与设计结果吻合良好,验证了设计结果的可靠性,获得了对总体设计具有指导意义的结论和试验数据结果。     

大量程MEMS陀螺仪在高速旋转导弹上的应用

弹旋频率是影响旋转导弹制导精度的主要因素之一.本文提出了一种弹旋频率测量用大量程MEMS陀螺仪技术方案,开展了大量程MEMS陀螺仪在旋转导弹上的应用研究,解决了大量程MEMS陀螺仪在偏心安装、较大力学环境下提高测量精度等问题,通过了飞行试验验证,实现了旋转导弹弹旋频率的精确测量.