基于卫星监视几何精度因子的UDRE值估计方法

星基增强导航系统(SBAS,Satellite Based Augmentation System)通过向用户提供用户差分距离误差(UDRE,User Differential Range Error),来保证广播星历和星钟改正数的精度并增强用户的完好性性能.给出了一种用于主控站的UDRE计算方法,提出了卫星监视几何精度因子(SSDOP,Satellite Surveillance Dilution of Precision)的概念.基于UDRE和SS-DOP的表达式,通过数学推导发现UDRE受到SSDOP和限制因子的影响,而限制因子可以用其统计平均值0.7438来替代,建立了由SSDOP估计UDRE的表达式.仿真结果表明:利用SS-DOP估计出的UDRE值,其误差不超过0.8 m,能够反映出当前卫星UDRE的特性,可以作为用户在无法接收完好性信息时快速推算UDRE的一种可行手段.     

激光照射离体血液的衰变规律

采用FLS900型稳态荧光光谱仪对激光持续照射的离体血液进行了荧光检测,得到了血液成分变化及荧光光谱特征随时间衰变的规律。实验结果表明：随着血液离体时间的延长,当受407nm的光激励时,605nm处的荧光峰峰位保持不变仅强度缓慢减弱。但在离体后的14h出现了谱形突变,并在474nm处产生了一个强荧光峰。分析认为,激光对离体血液的衰变有明显的延缓作用,但当激光持续照射一定时间后却导致了细胞的形态改变进而加速了细胞的溶血进程,产生了大量的内源性荧光物质还原烟碱腺嘌呤二核苷酸。研究结果为研究血细胞的活性衰变及细胞功能结构异常等提供了参考。     

A New Method for Analyzing Integrated Stealth Ability of Penetration Aircraft

Taking into account the limitations of existing stealth performance analysis methods, a method termed as the integrated stealth performance analysis method is proposed for evaluating the stealth ability of the penetration aircraft. Based on various target radar cross section (RCS) scattering characters, this article integrates the relevant parameters needed for building up target circumferential RCS scattering model and proposes the RCS scattering controlling parameters to control the changing trends of the relevant model RCS scattering characters. According to the radar dynamic detecting characters during the whole penetration course, a dynamic stealth performance evaluating model is proposed accompanied by a series of stealth ability estimation rules. This new analysis method can enhance the integrality and dependability of the stealth analysis conclusions and summarize the relationship between the target RCS scattering characters and their effects on stealth performance. The rules indicated by this relationship can be used as the reference for designing new type of stealth aircraft and setting up specific penetration tactics.     

Monocular Vision-based Two-stage Iterative Algorithm for Relative Position and Attitude Estimation of Docking Spacecraft

Visual sensors are used to measure the relative state of the chaser spacecraft to the target spacecraft during close range rendezvous phases. This article proposes a two-stage iterative algorithm based on an inverse projection ray approach to address the relative position and attitude estimation by using feature points and monocular vision. It consists of two stages: absolute orientation and depth recovery. In the first stage, Umeyama's algorithm is used to fit the three-dimensional (3D) model set and estimate the 3D point set while in the second stage, the depths of the observed feature points are estimated. This procedure is repeated until the result converges. Moreover, the effectiveness and convergence of the proposed algorithm are verified through theoretical analysis and mathematical simulation.     

Multi-frequency RCS Reduction Characteristics of Shape Stealth with MLFMA with Improved MMN

Three new control factors are presented for calculating the multipole mode number (MMN) efficiently and precisely. The effects of these control factors on the number of integral samples and the precision of multilevel fast multipole algorithm (MLFMA) are investigated. A new approach based on control factors which is proven to be able to improve the computational efficiency and reduce the needed memory significantly as well as ensuring the proper precision. For three aircraft models, the improved MLFMA is employed to analyze their multi-frequency scattering characteristics. It is found that aircraft shape can influence radar cross section (RCS) in different frequency zones. Both the multi-frequency RCS reduction characteristics of shape stealth aircraft and the conventional aircraft with stealth design taken into account are investigated, and the results show that shape stealth exhibits significant RCS reduction in the resonance and high-frequency zones, and with a weaker influence in the Rayleigh zone. Compared with radar absorbing material (RAM), shape stealth yields a wider multi-frequency RCS reduction. The above-mentioned results can be applied to stealth design for multiple frequencies or even for all frequencies.     

Low C/N_0 Carrier Tracking Loop Based on Optimal Estimation Algorithm in GPS Software Receivers

Suppressing jitter noises in a phase locked loop(PLL) is of great importance in order to keep precise and continuous track of global positioning system(GPS) signals characterized by low carrier-to-noise ratio(C/N0).This article proposes and analyzes an improved Kalman-filter-based PLL to process weak carrier signals in GPS software receivers.After reviewing the optimal-bandwidth-based traditional second-order PLL,a Kalman-filter-based estimation algorithm is implemented for the new PLL by decorrelating the model error noises and the measurement noises.Finally,the efficiency of this new Kalman-filter-based PLL is verified by experimental data.Compared to the traditional second-order PLL,this new PLL is in position to make correct estimation of the carrier phase differences and Doppler shifts with less overshoots and noise disturbances and keeps an effective check on the disturbances out of jitter noises in PLL.The results show that during processing normal signals,this improved PLL reduces the standard deviation from 0.010 69 cycle to 0.007 63 cycle,and for weak signal processing,the phase jitter range and the Doppler shifts can be controlled within ±17° and ±5Hz as against ±25° and ±15 Hz by the traditional PLL.     

Process-condition-driven Automatic Location of Components

In order to reduce the development cycle of mechanical products and corresponding toolings, a large number of components are utilized in these structures. Accordingly, automatic location method for components is a key issue in the research on intelligent computer aided design (CAD) techniques. Integrated with the investigation into intelligent design techniques for aircraft manufacturing toolings, in-depth researches on this issue are conducted. Formalized automatic location principles, representative methods and implementation algorithms are proposed and established. First, several terms and their formalized representative methods including process condition, location base and location operator are defined. Second, computation modeling of components automatic location and methods of location transformation are proposed. Then, definition of base structure and some key algorithms for automatic location are introduced. These principles and algorithms are developed, applied and verified in research project “Jig Intelligent CAD (JigICAD) System”.     

Surface Recrystallization in Nickel Base Single Crystal Superalloy DD6

The samples of single crystal superalloy DD6 are grit blasted and then heat treated either with the standard heat treatment procedure or in the temperature range of 1 000-1 250 °C for 4-16 h at vacuum atmosphere, then the recrystallization behavior of DD6 alloy is investigated. The results show that the equiaxed recrystallization grains form in the γ phase region where the as-cast γ′ phases have been dissolved completely, and cellular recrystallization forms in the region where the as-cast γ′ phases have been dissolved partially. The cellular recrystallization area consists of cellular grains, and the cellular grain consists of cubic γ′ phase, lamellar γ′ phase and γ+γ′ The coexistence of the equiaxed recrystallization zones and cellular recrystallization zones is a recrystallized characteristic of the cold worked single crystal samples which are heat treated at a temperature lower than the solution temperature. When the heating temperature is higher than 1 150 °C, with the increase of heat treating temperature, the equiaxed recrystallization zone expands, whereas the cellular recrystallization zone shrinks. All the deformed regions are consumed by equiaxed recrystallization after annealing at solution temperature.     

载人飞船有效载荷搭载技术及试验验证

载人飞船飞行任务中搭载的有效载荷设备质量、体积大并且安装要求苛刻,而返回舱内空间狭小且舱内环境复杂。针对这个问题,文章提出了通过改装返回舱座椅作为有效载荷搭载安放的方案。经过试验验证表明,该方案对飞船的影响很小,并且满足有效载荷设备搭载要求。     

微小卫星热控系统的研究现状及发展趋势

文章针对微小航天器研究现状和发展需求给热控系统设计带来的难点和挑战,从传热学和控制学两个角度,对近年来微小卫星热控领域出现的先进的热量收集、传输和排放装置展开论述;追踪了国内外学者提出的热控发展新的理论和方案。总之,开展各种智能、灵巧的航天器热控部件研究及针对高性能传热装置的控制策略研究是由微小卫星的结构布局和任务特点所决定的必然要求和发展趋势。