Robust algorithm for combating look direction error problems

A simple and fast zero tracking algorithm for adaptive arrays with large look direction errors is presented and investigated. Basically, the algorithm is based on adjusting the complex zeroes of a power inversion array in a time-multiplexed manner to track all the sources in the environment. To preserve the desired signal which is supposed to be closest to the look direction of 0°, the algorithm removes the zero with the shortest distance to e^j0 so that the directional response consists of only nulls steered at the jammers. When compared with the least mean square (LMS) algorithm employing zeroth and first-order look direction constraints, the new algorithm has about the same implementation complexity, is considerably faster, and possesses a much better signal-to-noise ratio (SNR) performance when the look direction is erroneous     

Neural controllers for systems with unknown dynamics

This study presents a methodology for specifying a neural controller for a system about which no a priori model information is available. The neural design presumes that a finite duration input/output (I/O) histogram on the system is available. The design procedure extracts from the histogram sufficient information to specify the neural feedback controller. The resultant controller will drive the system along a general output reference profile (unknown during the design). The resultant controller also exhibits the capability of disturbance rejection and the capacity to stabilize unstable plants     

用FoxBase实现超文本多媒体技术飞机主客仓空调故障诊断系统

本文通过一个应用系统的编制过程，阐述了用数据库技术实现超文本多媒体技术的方法。     

基于模型的液体推进系统故障诊断算法

给出串联双涡轮结构以泵作为供应系统的液体火箭发动机系统故障仿真的准动态数学方法和基于灰色关联度分析的实时诊断算法。该算法对于调整计算确定的具体系统和预先设定的典型故障模式进行仿真计算、事先形成该发动机系统的故障模式样本集。试车时, 利用诊断算法对采集的发动机性能参数进行实时分析, 从而给出发动机所处的健康状况, 以便及时采取措施, 提高发动机的安全性和可靠性。      

推力矢量飞机的起飞性能研究

简述推力矢量技术的作用,建立了带三轴推力矢量飞机的起飞滑跑段运动方程,通过数值仿真探讨了推力矢量的偏转大小对起飞性能的影响,对不同推力矢量偏转下飞机起飞性能的仿真计算结果进行了分析。仿真结果表明,采用直接力控制可以明显提高飞机的起飞性能。     

Erosion of a Polyimide Material Exposed to Simulated Atomic Oxygen Environment

Oxygen plasma source generated by thermal cathode filament discharge has been used to study the erosion process of polyimide (PI) materials in atomic oxygen (AO) environment, and their mass loss, surface morphology and surface chemical compositions have been examined by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) after exposure to incremental AO flux. The data indicate that the physical adsorption of AO at the samples' surface results in the increase of oxygen concentration when polyimide is exposed to AO flux. Then selective chemical reactions of groups of polyimide materials with AO yield volatile organic compounds, sample mass loss is on linear increase and carpet-like surface morphology forms. In the initial exposure to AO, the reaction occurs mainly between AO and carbon in specific location of aromatic ring, then the reaction rate of C=O groups gradually increases. After AO exposure, the oxygen concentration increases while nitrogen and carbon concentration decreases. Reaction rate of groups containing nitrogen is slower compared with carbon and oxygen.     

航空发动机复杂型面罩子钣充液成形技术

利用先进的钣材冲压计算机仿真技术对零件成形中的关键问题进行了研究,并通过先进的充液成形技术进行了实际零件的成形试验,试验的结果与模拟结果基本一致。最后应用模拟得到的成形参数,利用钣充液成形工艺成形出了合格的零件。     

Low C/N_0 Carrier Tracking Loop Based on Optimal Estimation Algorithm in GPS Software Receivers

Suppressing jitter noises in a phase locked loop(PLL) is of great importance in order to keep precise and continuous track of global positioning system(GPS) signals characterized by low carrier-to-noise ratio(C/N0).This article proposes and analyzes an improved Kalman-filter-based PLL to process weak carrier signals in GPS software receivers.After reviewing the optimal-bandwidth-based traditional second-order PLL,a Kalman-filter-based estimation algorithm is implemented for the new PLL by decorrelating the model error noises and the measurement noises.Finally,the efficiency of this new Kalman-filter-based PLL is verified by experimental data.Compared to the traditional second-order PLL,this new PLL is in position to make correct estimation of the carrier phase differences and Doppler shifts with less overshoots and noise disturbances and keeps an effective check on the disturbances out of jitter noises in PLL.The results show that during processing normal signals,this improved PLL reduces the standard deviation from 0.010 69 cycle to 0.007 63 cycle,and for weak signal processing,the phase jitter range and the Doppler shifts can be controlled within ±17° and ±5Hz as against ±25° and ±15 Hz by the traditional PLL.     

Environmental stress level evaluation approach based on physical model and interval grey association degree

 Associating environmental stresses (ESs) with built-in test (BIT) output is an important means to help diagnose intermittent faults (IFs). Aiming at low efficiency in association of traditional time stress measurement device (TSMD), an association model is built. Thereafter, a novel approach is given to evaluate the integrated environmental stress (IES) level. Firstly, the selection principle and approach of main environmental stresses (MESs) and key characteristic parameters (KCPs) are presented based on fault mode, mechanism, and ESs analysis (FMMEA). Secondly, reference stress events (RSEs) are constructed by dividing IES into three stress levels according to its impact on faults; and then the association model between integrated environmental stress event (IESE) and BIT output is built. Thirdly, an interval grey association approach to evaluate IES level is proposed due to the interval number of IES value. Consequently, the association output can be obtained as well. Finally, a case study is presented to demonstrate the proposed approach. Results show the proposed model and approach are effective and feasible. This approach can be used to guide ESs measure, record, and association. It is well suited for on-line assistant diagnosis of faults, especially IFs.