太阳电池阵枪式微型电阻焊接系统设计与分析

太阳电池阵枪式微型电阻焊接系统,采用电阻点焊的方法,辅以自动化操作,控制系统设有机器视觉监控可实时监控焊接情况。焊后对焊点进行金相分析,焊点界面结合紧密,无局部未焊合或虚焊、微裂纹、孔洞等明显缺陷,焊点综合性能佳。该焊接系统的研制对实现太阳电池阵的高效自动化组装和焊接,提高太阳电池阵焊点的承载能力、极端温度下的力学性能、可靠性、导电性等具有重要意义。     

基于特征模型的火箭发动机伺服控制系统设计

以新型大推力火箭发动机为研究对象,提出了基于特征模型的伺服系统控制器设计方法。首先,介绍了特征建模理论并讨论了特征模型参数范围;其次,采用人工蜂群算法实时估计火箭发动机伺服系统特征模型参数,使其满足特征模型输出与实际系统输出特性等价条件;最后,使用黄金分割自适应控制律保证系统在参数估计过程中的闭环稳定性,同时引入前馈跟踪控制律,逻辑积分控制律和逻辑微分控制律使伺服控制系统快速、精确跟踪线位移指令并改善动态性能。仿真结果表明,设计的火箭发动机伺服控制系统指令跟踪精度高,动态特性良好,鲁棒性强。     

大直径铝合金铆钉以铆代螺可行性试验研究

针对双层铝合金板铆接结构,通过电磁铆接工艺试验,分析Φ10mm-2A10铝合金铆钉镦头的微观组织,与钢质螺栓连接接头对比评价了铆接接头的力学性能。研究发现,随放电电压的增加,铆钉镦头直径逐渐增加、高度逐渐降低。铆钉镦头以绝热剪切为主要变形模式。铆接接头的最大剪切和拉脱载荷分别为23.3k N和35.0k N,均高于钢质螺栓连接接头,并且相对于螺接接头可减重15.8%。     

Early effects of low dose C ion or X-ray irradiation on human peripheral blood lymphocytes

The aim of this study was to estimate the acute effects of low dose ¹²C⁶⁺ ions or X-ray radiation on human immune function. The human peripheral blood lymphocytes (HPBL) of seven healthy donors were exposed to 0.05 Gy ¹²C⁶⁺ ions or X-ray radiation and cell responses were measured at 24 h after exposure. The cytotoxic activities of HPBL were determined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT); the percentages of T and NK cells subsets were detected by flow cytometry; mRNA expression of interleukin (IL)-2, tumor necrosis factor (TNF)-α and interferon (IFN)-γ were examined by real time quantitative RT-PCR (qRT-PCR); and these cytokines protein levels in supernatant of cultured cells were assayed by enzyme-linked immunosorbent assays (ELISA). The results showed that the cytotoxic activity of HPBL, mRNA expression of IL-2, IFN-γ and TNF-α in HPBL and their protein levels in supernatant were significantly increased at 24 h after exposure to 0.05 Gy ¹²C⁶⁺ ions radiation and the effects were stronger than observed for X-ray exposure. However, there was no significant change in the percentage of T and NK cells subsets of HPBL. These results suggested that 0.05 Gy high linear energy transfer (LET) ¹²C⁶⁺ radiation was a more effective approach to host immune enhancement than that of low LET X-ray. We conclude that cytokines production might be used as sensitive indicators of acute response to LDI.     

Eliminating negative VTEC in global ionosphere maps using inequality-constrained least squares

Currently, ground-based Global Navigation Satellite System (GNSS) stations of the International GNSS Service (IGS) are distributed unevenly around the world. Most of them are located on the mainland, while only a small part of them are scattered on some islands in the oceans. As a consequence, many unreasonable zero values (in fact negative values) appear in Vertical Total Electron Content (VTEC) of European Space Agency (ESA) and Center for Orbit Determination in Europe (CODE) IONEX products, especially in 2008 and 2009 when the solar activities were rather quiet. To improve this situation, we directly implement non-negative physical constraints of ionosphere for global ionosphere maps (GIM) with spherical harmonic functions. Mathematically, we propose an inequality-constrained least squares method by imposing non-negative inequality constraints in the areas where negative VTEC values may occur to reconstruct GIM models. We then apply the new method to process the IGS data in 2008. The results have shown that the new algorithm efficiently eliminates the unwanted behavior of negative VTEC values, which could otherwise often be seen in the current CODE and ESA GIM products in both middle and high latitude areas of the Southern Hemisphere (45°S∼90°S) and the Northern Hemisphere (50°N∼90°N). About 64% of GPS receivers’ DCBs have been significantly improved. Finally, we compare the GIM results between with and without the inequality constraints, which has clearly shown that the GIM result with inequality constraints is significantly better than that without the inequality constraints. The inequality-constrained GIM result is also highly consistent with the final IGS products in terms of root mean squared (RMS) and mean VTEC.     

关于设计保证系统适航独立核查的思考

民用飞机主制造商建立设计保证系统,旨在民机研制过程中充分发挥自主适航的能力,通过组织机构、职责、程序和资源落实设计、适航以及独立监督三大职能,以保证航空产品的设计或者设计更改满足适航当局的要求。其中,设计保证系统适航职能的适航独立核查功能正是这一保证的关键。基于对设计保证系统适航独立核查功能的具体分析基础上,从设计保证系统的规划与设计层面提出了实现适航独立核查功能的机制,给出了机制中需明确的责任主体、职责与资质要求、工作流程与支撑工具以及管理程序等方面的建议,并从大数据知识的技术支撑和阶梯式递进的人才培训保障两方面以不断优化改进的方法工具与人力配置来深化适航独立核查的功能与效果,进而增强设计保证系统对飞机型号研制的保证作用。     

凹槽对涡轮叶片前缘换热特性影响的实验研究

为了探究带有凹槽造型的涡轮叶片前缘结构的换热特性,采用瞬态热色液晶技术研究了凹槽对涡轮叶片前缘外表面换热系数的影响,获得了不同主流雷诺数以及湍流度下涡轮叶片原始前缘结构及带两种不同深度凹槽的前缘结构外表面的换热系数分布数据,并采用努塞尔数评估对比了三种结构下的换热特性。实验结果表明：原始前缘结构存在高换热系数区,随着湍流度的增大,高换热核心区显著增大;由于凹槽对滞止区域的流动产生了影响,带凹槽的前缘结构在不同工况下均表现出将原始结构高换热核心区分割为凹槽两侧突出边缘的高换热区和槽内低换热区的分布特征;凹槽可以显著降低前缘表面的换热强度,带浅凹槽的前缘结构在前缘表面的面平均努塞尔数相比原始前缘结构降低约7.9%~14.5%,带深凹槽的前缘结构相比原始前缘结构降低约9.1%~20.9%;与Reg=200,000相比,当Reg=150,000时,带凹槽的前缘结构相比原始结构的低换热优势更强。     

末制导雷达检测接口标准化初探

在分析现役反舰导弹末制导雷达检测接口现状及存在问题的基础上,提出了末制导雷达检测接口标准化思想,并设计了一种能够覆盖我海军所有现役反舰导弹末制导雷达检测接口而且可扩展的末制导雷达标准检测接口。     

基于最小值原理的冗余度机器人动力学控制

为了解冗余度机器人全局法优化中数值求解的困难,本文讨论了动力学方程的建立,无约束和有约束最优控制问题之间的内在联系,重点分析了求解最优控制问题的数值方法,文中提出了双向异步积分迭代的求解正则方程组的直接迭代法,较好解决了状态方程和协态方程稳定相逆给求解两点这值问题带来的困难。     

用激光干涉技术测量转速的研究

叙述了一种新型转速激光干涉测量方法,详细分析了这种方法的工作原理,确定了本测量方法的转速测量范围,给出了实验结果。