铜铬复合电极电火花小孔加工机理及试验研究

电火花小孔加工中存在工具电极损耗严重、加工速度慢、棱角变钝出现锥度等问题。分析其存在问题的原因,提出采用铜铬复合电极进行电火花小孔加工。分析其加工机理并进行实验,实验结果表明:采用铜铬复合电极进行小孔加工比采用铜电极进行小孔加工能显著提高加工速度,减小锥度和电极相对损耗。     

级间引气条件下轴流压气机特性预测方法

为了确定级间引气对多级轴流压气机特性的影响，便于在燃气轮机整体性能分析时简化引气模型，开展级间引气条件 下轴流压气机特性预测方法研究，通过级间匹配模型求解引气位置压力、温度和引气位置上下游的特性，根据引气后的上下游重 新匹配确定受引气影响的压气机特性线。结果表明：对5级压气机在换算转速为1.0、0.7和0.5倍设计转速情况下分别进行了预 测，得到的特性线与压气机原特性线相比有明显变化。在压比-流量特性图中，引气后的等换算转速线整体位于原特性线之上，压气 机压比提高，在小流量时提高较小，在大流量时提高较大，并且提高效果随引气流量增加逐渐明显；在效率-流量特性图中，引气后的 等换算转速线与原特性线交于一点，在该点左侧效率因引气而降低并随着引气流量增大而进一步降低，在该点右侧则刚好相反。采 用此5级压气机的抽放气特性对性能预测模型进行了验证，引气位置总温的相对误差不超过1%，总压的相对误差不超过2%。     

基于MiniGUI的嵌入式电加工数控系统图形界面设计

首先介绍将MiniGUI应用于嵌入式数控电加工系统硬件平台组成和软件操作系统的选择,概括了所采用的图形支持系统MiniGUI的性能特点、体系结构及程序开发方法,然后给出了该系统界面的设计框架,最后对参数设置,数控程序界面,加工显示等功能模块设计进行了说明.实验表明,系统具有界面友好,实时性好,可靠性高等特点.     

将日本文化融入到二外日语教学的始终

每一种语言的形成和发展都与其社会环境密切相连，语言同时反映出一个国家和民族的历史和文化。从这个层面上说，教授语言同时也是在教授文化，学习语言的同时也是在学习文化。一个科学的语言教学体系，必须将文化教学紧密融入到语言的教学当中。鉴于当前的高校二外日语教学中鲜有独立开设日本文化课的情况，将日本文化融入到二外日语教学的始终，将会有效帮助学生在有限的学习时间里取得良好的学习效果。本文针对现阶段高校二外日语教学的特点，探讨了在日本文化背景下进行二外日语教学的重要性，并提出了一些文化导入的内容与方法。     

回流焊温度曲线热容研究

本文全面的分析了回流焊温度曲线在回流焊工艺中的作用，回流焊工艺的工艺特点、影响回流焊温度曲线的各种因素。如何从热容的思想建立回流焊温度曲线的方法？如何调整温度曲线通过控制温度曲线改善工艺过程，减少回流焊工艺的缺陷？     

频率计数器在航天器信号频率测量中的适用性分析

从频率计数器的工作原理出发,分析了航天器测控通信中常用的调相信号、调频信号和相移键控信号的频率测量误差,给出了调相信号和调频信号的测量误差表达式。使用频率计数器对上述3种航天器信号进行了频率测量试验。理论分析和试验结果表明,频率计数器适用于航天器调相信号和调频信号的频率测量,不适用于相移键控信号的频率测量。在实际使用中,为保证测量精度,应根据被测信号的调制方式选择适当的测量方法。     

Predictive Modeling and Parameter Optimization of Cutting Forces During Orbital Drilling

To optimize cutting control parameters and provide scientific evidence for controlling cutting forces,cutting force modeling and cutting control parameter optimization are researched with one tool adopted to orbital drill holes in aluminum alloy 6061.Firstly,four cutting control parameters(tool rotation speed,tool revolution speed,axial feeding pitch and tool revolution radius)and affecting cutting forces are identified after orbital drilling kinematics analysis.Secondly,hybrid level orthogonal experiment method is utilized in modeling experiment.By nonlinear regression analysis,two quadratic prediction models for axial and radial forces are established,where the above four control parameters are used as input variables.Then,model accuracy and cutting control parameters are analyzed.Upon axial and radial forces models,two optimal combinations of cutting control parameters are obtained for processing a13mm hole,corresponding to the minimum axial force and the radial force respectively.Finally,each optimal combination is applied in verification experiment.The verification experiment results of cutting force are in good agreement with prediction model,which confirms accracy of the research method in practical production.     

基于加权全变差最小化的中子外部CT重建算法

针对中子外部CT检测需求，提出了基于加权方向全变差（WDTV）最小化的中子外部CT重建算法。首先，利用平行束数据对称性原理将正弦图中旋转中心另一侧缺失的投影数据进行补充；其次，采用传统FBP算法进行了外部CT扫描模式下的CT重建。为了抑制传统FBP、SART算法重建图像中径向边缘伪影，采用WDTV算法计算沿径向和周向方向的局部方向差分并作加权和。另外，在重建模型的WDTV项中引入2个权重参数以控制径向边缘和切向边缘的不同响应强度。最后，采用所提算法研究了重建图像质量与投影数据量的关系。计算机仿真和真实冷中子实验表明:基于WDTV最小化的中子外部CT重建算法能够有效抑制径向边缘伪影，获得高质量重建图像。      

Fringe fitting and group delay determination for geodetic VLBI observations of DOR tones

Extracting the group and phase delays of interferometric observations produced in the Very Long Baseline Interferometry (VLBI) measurement concept requires a special fringe fitting and delay search algorithm for the recorded bandwidth. While fringe fitting is in use routinely for several megahertz wide channels in geodetic and astrometric VLBI with quasar observations, fringe fitting for artificial tones of very small bandwidth of artificial signals for Differential One-way Ranging (DOR) requires a different way of handling. In a project called Observing the Chang’E-3 Lander with VLBI (OCEL), the DOR tones emitted by the Chang’E-3 lander were observed in a standard geodetic VLBI mode with 8 or 4?MHz wide channels to maintain compatibility with the corresponding quasar observations. For these observations, we modified the existing fringe fitting program of the Haystack Observatory Processing Software (HOPS), fourfit, to properly handle narrow band DOR tones. The main motivations are that through this modification, the data of quasars and artificial radio sources can be processed in the existing geodetic analysis pipeline, and that the algorithm can be used for similar projects as well. In this paper, we describe the algorithm and show that the new algorithm produces much more reliable group delay results than using the standard fourfit algorithm. This is done by a simulation test and in particular by processing of real observations. It is shown that in many cases, systematic deviations of several nanoseconds, which are seen with the standard fourfit algorithm, can be avoided. The ultimate benefit of the new procedure is demonstrated by reducing the errors in delay triangle closures by at least a factor of 3, which, in the OCEL case, is from ～300 to ～100?ps.