区域杂波估计的多目标跟踪方法

高斯粒子概率假设密度（PHD）滤波往往假定杂波密度参数已知,这种做法对于实际应用是不现实的。此外,杂波的参数值通常依赖于环境条件,可能随时间发生变化。因此,多目标跟踪算法中需要实时准确估计杂波密度的参数。基于此,提出了一种多目标跟踪的区域杂波估计方法。首先根据量测信息在线估计出场景中的杂波数目,然后估计落入目标附近感兴趣区域的杂波数,并估计每个目标感兴趣区域杂波强度。仿真结果表明,在复杂场景下算法的跟踪性能明显优于未进行杂波估计的多目标跟踪算法,提高了跟踪的实时性和跟踪精度。     

Fault self-repair strategy based on evolvable hardware and reparation balance technology

In the face of harsh natural environment applications such as earth-orbiting and deep space satellites, underwater sea vehicles, strong electromagnetic interference and temperature stress,the circuits faults appear easily. Circuit faults will inevitably lead to serious losses of availability or impeded mission success without self-repair over the mission duration. Traditional fault-repair methods based on redundant fault-tolerant technique are straightforward to implement, yet their area, power and weight cost can be excessive. Moreover they utilize all plug-in or component level circuits to realize redundant backup, such that their applicability is limited. Hence, a novel selfrepair technology based on evolvable hardware（EHW） and reparation balance technology（RBT） is proposed. Its cost is low, and fault self-repair of various circuits and devices can be realized through dynamic configuration. Making full use of the fault signals, correcting circuit can be found through EHW technique to realize the balance and compensation of the fault output-signals. In this paper, the self-repair model was analyzed which based on EHW and RBT technique, the specific self-repair strategy was studied, the corresponding self-repair circuit fault system was designed, and the typical faults were simulated and analyzed which combined with the actual electronic devices. Simulation results demonstrated that the proposed fault self-repair strategy was feasible. Compared to traditional techniques, fault self-repair based on EHW consumes fewer hardware resources, and the scope of fault self-repair was expanded significantly.     

通用的航电系统总线接口仿真平台的设计和应用

针对当前航电系统仿真器的缺点,提出了一种通用的航电系统总线接口仿真平台的设计思想,通过建立仿真数据库,从待仿真的航电系统设备中的接口信息抽象出属性和行为,然后用数据库的方式来描述,实现了仿真软件和仿真对象的分离,从而使该仿真平台具备了通用性和灵活性。该仿真平台已经在某型机航电系统地面联试中得到了应用。     

基于T-S模糊系统的空天飞行器鲁棒自适应轨迹线性化控制

 基于T-S模糊系统提出了鲁棒自适应轨迹线性化控制(RATLC)方法。利用T-S模糊系统逼近未知干扰和不确定性因素,并采用Lyapunov方法设计了鲁棒自适应控制律。不论系统状态的维数和用于逼近不确定的模糊系统规则数为多少,整个系统仅有两个参数在线调整。理论分析证明了闭环系统所有信号一致最终有界。应用提出的控制方案设计了空天飞行器(ASV)飞行控制系统,并在高超声速飞行条件下进行了仿真验证,仿真结果表明了控制方案的有效性和鲁棒性。     

空乘大学生心理健康现状调查与对策分析

心理健康对于学生的成长成才具有至关重要的作用。文章针对飞行学院2009级和2010级空乘专业学生进行了心理健康现状调查,分析了目前学院学生的心理健康整体水平和成长需求,为学院在制订学生心理健康培养对策时提供理论参考。     

地外二氧化碳转化利用技术研究现状与展望

为有效解决未来长期载人地外生存面临的物资供给等关键问题,获得更高的氧回收率、能量转化效率和更低的应用成本,亟须发展更高效的地外二氧化碳转化利用技术。文章总结了地外二氧化碳利用的发展现状并分析了近期的研究进展,发现不同技术之间差异大,在航天应用过程中,需充分考虑地外环境限制因素,以选用更合适的技术。空间站上已搭载的Sabatier装置和火星车上的MOXIE装置初步实现了地外二氧化碳还原。以“地外人工光合成”为代表的常温二氧化碳转化技术可为地外环控生保提供新路线。其不仅能够实现地外氧气供给,还可获得甲酸、乙烯和甲烷等有机分子作为燃料或生物转化原料。随着相关基础研究的不断发展,有望实现二氧化碳的高效转化和高附加值有机物、甚至碳糖食物的生产。地外二氧化碳转化利用技术的发展,将实现地外密闭环境下的废弃资源利用与物质循环,降低载人空间站、载人深空飞船的物资供应需求,也将为原位资源利用火星大气中的二氧化碳提供创新思路,以支撑未来可承受、可持续的地外生存任务。     

RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.