六喷管超音速引射器性能的理论分析和实验研究

对某一定尺寸的六喷管超音速引射器进行气动性能的实验研究。结果表明：随着主次流压比Ｐ＊ｐ／Ｐ＊ｓ增加，引射系数及修正引射系数下降；当引射系数增加时，混合管动量修正系数Ｋｍ下降，但主喷管流量系数μ变化不大。对上述工况进行理论计算的结果与实验数据符合良好。     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

一种新颖的瞬时浮点放大器

介绍了瞬时浮点放大器的原理及构成，并给出一种结构新的具有２５６阶的瞬时浮点放大器，可有效地提高数据采集系统的测量范围。     

基于抓持稳定度的多指灵巧手抓持控制

提出了一种控制多指灵巧手稳定抓持物体的新方法。首先给出了接触稳定度和抓持稳定度的定义及其相应的计算方法,然后探讨了基于抓持稳定度的多指灵巧手抓持控制方法。最后以北京航空航天大学的BH-2新型三指灵巧手为背景,对所提出的方法进行了仿真验证,仿真结果证明所提方法是有效可行的。     

某型飞机断裂谱的低载截除

研究了截除低载对全机结构各部位裂纹扩展寿命的影响,导出寿命误差与裂纹扩展比的关系,并指出寿命误差主要取决于开裂结构的材料参数,而开裂部位的影响则可忽略不计。     

飞机概念设计中的生存力效益/代价综合评估方法

 首先介绍了军用飞机在常规武器威胁下的生存力评估指标及几种提高生存力措施；其次研究了将全因素试验法应用于评价生存力提高措施对生存力评估指标的增益影响的可行性；最后基于飞机的安全性、维修性、可靠性、保障性、性能及费用等约束条件，建立了一种能应用全因素试验法在飞机概念设计中进行飞机生存力效益／代价综合评估的方法。算例初步说明了方法的有效性。     

非定常风洞壁压特性研究

在低速风洞中用2组后掠角分别为70°和65°的三角翼模型进行过失速非定常运动,测量风洞洞壁上非定常壁压。研究风洞非定常壁压的延迟与频率特性。讨论了模型尺寸、缩减频率、前缘后掠角等对风洞非定常壁压的影响。     

直升机航姿信号仿真研究及其在电子特设系统综合模拟试验中的应用

本文介绍了某直升机电子特设系统综合模拟试验的直升机运动仿真模型,在此基础上着重对直升机航姿信号两种仿真方法进行了详细的阐述,并对两种方法的仿真试验结果进行了分析比较,指出了各自的优缺点。     

叶片安装角槽式轮毂处理的三维数值模拟

采用三维定常不可压Ｎ－Ｓ方程对叶片安装角槽式的轮毂处理的叶栅通道进行了数值模拟,分析了叶片安装角槽式的轮毂处理的扩稳机理,在计算中采用了非交错网格的ＳＩＭＰＬＥ算法,并解决了因使用非交错网格离散方程而带来的压力场振荡的抑制问题,紊流模型采用ｋ－ε两方程模型。     

氢/空气超音速燃烧自燃规律的实验研究

对平行喷射氢／空气超音速燃烧自燃规律进行了实验研究。主流空气用氢和空气燃烧补氧的方式加热到温度1000～2100K，压力0．8～1．6MPa。发现滞止温度、滞止压力和燃烧室内部构型等都对自燃有影响，特别是滞止温度和内壁构型的影响非常大。研究了四种试验段构型的自燃规律，找到了它们的自燃极限条件。对于光滑内壁构型，当温度接近自燃极限时，发现了有兴趣的现象并作了讨论。