高性能纤维的可织性研究进展

高性能纤维的可织性反映了高性能纤维在织造成形加工中的抗损伤能力,其优劣直接影响织造效率和最终复材制品的性能和质量。本文内容涉及碳纤维、玻璃纤维、芳纶纤维和多种无机陶瓷纤维的可织性研究。主要介绍了高性能纤维的三维机织损伤表征与优化技术,阐述了其可织性评价方法的研究现状与进展,归纳了不同类型高性能纤维织造适应性的改善方法,最后提出了本领域亟待解决的问题和主攻方向。     

全柔性空间机器人基于虚拟力的输出反馈有限维重复学习控制及振动抑制

探讨了基座、关节、臂均存在柔性情况下,空间机器人关节轨迹运动及多重柔性振动的主动控制和主动抑制问题.结合线性弹簧、扭转弹簧、简支梁及假设模态法,利用拉格朗日方程建立了基座、关节、臂全柔性影响下的空间机器人系统动力学模型,利用奇异摄动法,将模型分解为关节运动慢变子系统与关节柔性振动快变子系统.为控制慢变子系统中载体姿态、关节刚性运动并且抑制臂的柔性振动,依据虚拟控制力的概念,设计了基于有限维傅里叶级数解析周期信号的输出反馈重复学习算法.李雅普诺夫直接法证实了上述控制器的稳定性.为了抑制快变子系统中基座和关节的柔性振动,分别采用线性二次最优控制方法以及引入关节柔性补偿器间接增大关节等效刚度的方式,使控制算法不局限于求解弱非线性问题.系统数值仿真结果表明,所提出的控制器能够有效抑制机器人多重柔性构件的振动,实现对期望信号的高品质追踪.     

Orbit-attitude-vibration coupled dynamics of tethered solar power satellite

A new orbit-attitude-vibration coupled dynamic model of the tethered solar power satellite (Tethered SPS) is established based on absolute nodal coordinate formulation. The Hamilton’s equation of the system is derived by introducing generalized momentum through Legendre transformation. The correctness of the proposed model is verified by an example. The dynamic characteristics of the Tethered SPS are studied using the symplectic Runge-Kutta method. Simulation results show that the orbital radius and the total energy of the system are well preserved. The attitude of the system is unstable when the mass of the bus system is small. However, the attitude stability is dependent on some other parameters of the system, which requires further studies. It is also found that the average tether force/deformation can be roughly estimated by simplifying the solar panel as a particle. The proposed model can be used to study the orbit-attitude-vibration coupled dynamics and control problems.     

Study of ionospheric D region changes during solar flares using MF radar measurements

During solar flares, the X-ray radiation suddenly increases, resulting in an increase in the electron density of the atmospheric D region and a strong absorption of short-wave radio waves. Based on Langfang medium frequency (MF) radar, this paper analyzed the variation characteristics of D region in the lower ionosphere from 62 km to 82 km. The analysis focused on multiple C-level and M-level solar flare events before and after the large-scale flare event at 11:53 (UT) on September 6, 2017. The results show that it is difficult to detect the electron density over 70 km in Langfang during solar flares, but the electron density value can be obtained as low as 62 km, and the stronger the flare intensity, the lower the detectable electron density height. Besides, the equal electron density height, the received power of X and O waves will also be significantly reduced during the flares, and the reduction of equal electron density height has a weak linear relationship with flare intensity.     

A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.     

High temporal resolution global PWV dataset of 2005–2016 by using a neural network approach to determine the mean temperature of the atmosphere

Atmospheric water vapour plays an important role in phenomena related to the global hydrologic cycle and climate change. However, the rapid temporal–spatial variation in global tropospheric water vapour has not been well investigated due to a lack of long-term, high-temporal-resolution precipitable water vapour (PWV). Accordingly, this study generates an hourly PWV dataset for 272 ground-based International Global Navigation Satellite System (GNSS) Service (IGS) stations over the period of 2005–2016 using the zenith troposphere delay (ZTD) derived from global-scale GNSS observation. The root mean square (RMS) of the hourly ZTD obtained from the IGS tropospheric product is approximately 4 mm. A fifth-generation reanalysis dataset of the European Centre for Medium-range Weather Forecasting (ECMWF ERA5) is used to obtain hourly surface temperature (T) and pressure (P), which are first validated with GNSS synoptic station data and radiosonde data, respectively. Then, T and P are used to calculate the water vapour-weighted atmospheric mean temperature (Tm) and zenith hydrostatic delay (ZHD), respectively. T and P at the GNSS stations are obtained via an interpolation in the horizontal and vertical directions using the grid-based ERA5 reanalysis dataset. Here, Tm is calculated using a neural network model, whereas ZHD is obtained using an empirical Saastamoinen model. The RMS values of T and P at the collocated 693 radiosonde stations are 1.6 K and 3.1 hPa, respectively. Therefore, the theoretical error of PWV caused by the errors in ZTD, T and P is on the order of approximately 2.1 mm. A practical comparison experiment is performed using 97 collocated radiosonde stations and 23 GNSS stations equipped with meteorological sensors. The RMS and bias of the hourly PWV dataset are 2.87/?0.16 and 2.45/0.55 mm, respectively, when compared with radiosonde and GNSS stations equipped with meteorological sensors. Additionally, preliminary analysis of the hourly PWV dataset during the EI Niño event of 2014–2016 further indicates the capability of monitoring the daily changes in atmospheric water vapour. This finding is interesting and significant for further climate research.     

液体火箭发动机静态特性的非线性分析

液体火箭发动机内外干扰因素对参数影响的计算,一般采用线性化小偏差计算法。本文研究了液体火箭发动机内外干扰因素对参数影响的、求解非线性方程组的数字计算机仿真算法,初步取得了较为满意的成果,提高了计算精度,可以实现优化设计。     

遗传算法设计梯度子实现优化的图象边界检测

计算机图象处理技术可广泛应用各种图象测试、模式识别和计算机视觉等领域，而图象边界检测是计算机图象处理的最基本和最低层的步骤之一。由于噪声的干扰和图象光照不均匀等因素的影响，目前的图象边界检测方法还不能有效地检测出各种不同模式的边界。本文提出了一种基于遗传算法和灰度梯试算子的图象边界检测法，通过对样本图象的训练，设计对训练样本模式最优的灰度梯度算子，增加了对噪声的抗干扰能力，并且使被检测出的边界更准确。     

点焊质量模糊控制系统研究

简要介绍了电阻点焊单片机微机模糊控制原理，确定了点焊模糊控制算法，分析了点焊模糊控制系统的硬件结构和软件设计。实验结果表明，该控制系统能够有效实现点焊质量的模糊控制，具有较强的自适应特性，可用于电阻焊智能制造。     

体表电位标测系统中关键技术——心电信号数据高速采集

心电信号的数据采集是体表标测系统中关键技术之一。文中提出了128通道高性能体表标测系统中心电信号数据采集的VxD算法，在Wind9x系统下利用VxD技术、锁定内存和临界资源互斥访问算法相结合，实现了心电数据高速实时采集。该软件充分利用了硬件的等待时间，具有实时性高，运行速度快占内存少的特点。该软件在VtoolsD开发平台上用VisualC＋＋开发。