薄壁板结构声激励载荷作用下的响应谱估算方法

本文提出一种估算薄壁板结构在声激励载荷作用下的响应谱的方法。这一方法借助板式结构的线性振动理论, 研究薄壁板结构在声激励载荷作用下动力响应问题, 引入结合受纳函数来考虑结构模态的波长和声波长在空间的耦合程度。本文给出的估算薄壁板结构声激励响应的方法, 不仅对规则的几何结构有效, 而且也应用于复杂薄壁板结构的分析。并将估算的结果与实验值做出了比较, 较为吻合。      

三维LDV光学系统技术方案的研究

通过自行设计制造色分离器、一维发射系统、提升反射镜组针丹麦ＤＡＮＴＥＣ的二维ＬＤＶ改造为三维ＬＤＶ。提出了镀膜分光和紫光滤光片提纯相结合的最佳分色方案并研制了镀膜分色片、紫光波光片这两种关键部件。通过联调作校准试验,证明本三维ＬＤＶ系统完全达到了设计技术指标。     

光线追踪求交算法的研究及其实现

本文对光线追踪求交算法进行了深入讨论。文中结合形体设计实例说明了此算法的正确性和实用性。     

开关量输出型传感器电气保护装置的研制

本文以三线制ＮＰＮ式开关量输出型传感器为例,介绍了传感器的负载驱动单元的结构特点及驱动方式。针对工程使用中经常出现的故障,研制了相应的电气保护装置。     

小卫星最佳温度动态范围热控设计方法研究

为探索低热惯性小卫星动态传热下的热控设计方法,首先建立双层集总参数模型,在得到温度时均量解析解的基础上,类比阻尼振荡系统,采用傅里叶变换法求解温度波动量解析解,从而建立周期变化外热流下温度动态变化与热控参数间的解析关系。以此为基础提出“最佳温度动态范围”热控设计新方法。对某型微小卫星进行“最佳温度动态范围”热控设计,并通过其在轨温度遥测量动态变化对该方法的准确性和可行性进行验证。     

基于Pro/E的三维总剂量分析软件实现及其在微小卫星中的应用

微小卫星基于成本和重量的考虑使用了大量COTS(commercial off-the-shelf,商用货架产品)器件。总剂量效应是制约COTS器件航天应用的主要因素之一。为了更加准确地计算COTS器件的辐射剂量,避免过设计,采用Pro/E二次开发技术自主开发了三维总剂量分析软件。与商业软件Space Radiation在简单模型上进行了对比验证,结果表明自研软件计算结果可信。采用自研软件对在研的型号开展三维总剂量分析,降低了对总剂量敏感器件的抗总剂量要求,减小了屏蔽厚度。     

遥感载荷通用数据处理平台设计与实现

针对遥感载荷下行数据流设计不一致问题,提出了一种遥感载荷地面数据处理平台的设计思路和实现方法,对遥感载荷数据流模型描述和任务指令建立等关键技术进行了分析。该方法构建的系统通过配置能够适应不同遥感载荷数据流结构,具备通用性。系统主要处理节点采用刀片服务器完成运算,各个处理节点之间松耦合,实现了插件式部署,可供多节点复杂结构处理系统设计时参考。     

宽带数字信道化接收机技术的热点和发展趋势

数字信道化接收机具有瞬时频带宽、动态范围大、能实现超宽带侦察的特点,能较好地满足现代电子战接收机的要求。首先介绍了数字信道化接收机的基本原理,在此基础上,重点分析了数字信道化接收机在信道化过程中的研究热点和难点,并简述了信道化接收机技术的发展趋势。     

Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.