兰桂坊的“红磨坊”

到过法国的旅游者,一般都知道巴黎有两个著名的歌舞表演厅,—个是位于市中心香榭丽舍大道的丽都,一个是位于城北蒙马特高地脚下白色广场附近的红磨坊。屋顶上装着长长的、闪烁着红光的大叶轮的红磨坊则是较为地道的法国式歌舞厅。MCG公司以法国红磨坊红磨坊为设计理念,把次情景带进了香港兰桂坊酒店Bisous酒吧。然而Bisous的设计并非照搬红色的浪漫风情,而是将未来趋势的一种极简概念设计结合了新的元素,将红磨坊的主题得以抽象化和现代化。以现今最时新的手法,完整地呈现了"红磨坊"的内心世界,概念可能不算创新,但精彩程度符合了当下时尚的思想!     

On the stability of spinning satellites

We study the directional stability of rigid and deformable spinning satellites in terms of two attitude angles. The linearized attitude motion of a free system about an assumed uniform-spin reference solution leads to a generic MGK system when the satellite is rigid or deformable. In terms of Lyapunov’s stability theory, we investigate the stability with respect to a subset of the variables. For a rigid body, the MGK system is 6-dimensional, i.e., 3 rotational and 3 translational variables. When flexible parts are present the system can have any arbitrary dimension. The 2×2 McIntyre–Myiagi stability matrix gives sufficient conditions for the attitude stability. A further development of this method has led to the Equivalent Rigid Body method. We propose an alternative practical method to establish sufficiency conditions for directional stability by using the Frobenius–Schur reduction formula. As practical applications we discuss a spinning satellite augmented with a spring–mass system and a rigid body appended with two cables and tip masses. In practice, the attitude stability must also be investigated when the spinning satellite is subject to a constant axial thrust. The generic format becomes MGKN as the thrust is a follower force. For a perfectly aligned thrust along the spin axis, Lyapunov’s indirect method remains valid also when deformable parts are present. We illustrate this case with an apogee motor burn in the presence of slag. When the thrust is not on the spin axis or not pointing parallel to the spin axis, the uniform-spin reference motion does not exist and none of the previous methods is applicable. In this case, the linearization may be performed about the initial state. Even when the linearized system has bounded solutions, the non-linear system can be unstable in general. We illustrate this situation by an instability that actually happened in-flight during a station-keeping maneuver of ESA’s GEOS-I satellite in 1979.     

Ship-mounted satellite tracking antenna with fuzzy logic control

A robust satellite tracking antenna is designed to cope with the sensor imprecision and the highly noisy sea environment. Fuzzy logic is utilized for the controller imprecision and the highly noisy sea environment. Fuzzy logic is utilized for the controller design as well as inaccurate data interpretation. The fuzzy-rule based controller eliminates the need to model the nonlinear and noisy ship-mounted antenna system. With Global Positioning System and the tracking controller the antenna can be brought to a neighborhood of the desired orientation. Spiral search with signal power feedback can then servo the antenna to the true orientation. Computer simulations and antenna experiments verify our design is indeed robust and effective     

Identification of Aircraft Stability and Control Parameters Using Hierarchical State Estimation

Previous attempts to identify aircraft stability and control derivatives from flight test data, using three-degrees-of-freedom (3-DOF) longitudinal or lateral-directional perturbation equation-of-motion models, suffer from the disadvantage that the coupling between the longitudinal and lateral-directional dynamics has been ignored. In this paper, the identification of aircraft stability parameters is accomplished using a more accurate 6-DOF model which includes this coupling. Hierarchical system identification theory is used to reduce the computational effort involved. The 6-DOF system of equations is first decomposed into two 3-DOF subsystems, one for the longitudinal dynamics and the other for the lateral-directional dynamics. The two subsystem parameter identification processes are then coordinated in such a way that the overall system parameter identification problem is solved. Next, a six-subsystem decomposition is considered. Computational considerations and comparison with the unhierarchically structured problem are presented.     

Effective speed-up of slowly responding measurement systems.

In some applications, the slow response of measurement systems can present significant control problems or cause difficulties in interpreting data sequences, even though they are quite accurate in indicating the value of an unchanging measured parameter. Happily, instrument systems often have characteristics which make it possible to apply certain advanced systems control techniques which can compensate for the inherent slowness of the instrument system. In this paper, some means of dealing with this pmblem in some scenarios are described.     

Multiple-Target Monopulse Radar Processing Techniques

The problem of determining target parameters of a known number of radar targets falling in the same range-Doppler-angle-angle resolution cell is examined for the noise-free case. The required minimum number of radar beams is determined, based upon approximating the beam patterns by a Taylor series expansion, both for the general problem and for factorable beams. Signal processors for target position estimation are developed for the two-target case and equations are presented for the general case.     

Effect of Dimensions on the Efficiency of Radiant Energy Cells

This paper deals with the enhancement of the quantum efficiency and photovoltaic energy conversion efficiency of a p-n semiconducting cell by optimizing the dimensions of the cell. Based on the Shockley-Read statistics a general expression for the quantum efficiency of monochromatic incident radiant energy photons has been derived in terms of the absorption coefficient of the incident photons, the minority carrier diffusion length, the built-in electrostatic field appearing in diffused cells, and the surface recombination velocity in the exposed layer of the cell. Although the expressions derived may be used for all semiconducting p-n cells, special efforts have been made in the analysis and computations of the germanium p-n cell. The germanium cells show a great potential for photovoltaic energy conversion from radiant sources other than the sun. The results for germanium indicate that the quantum efficiency strongly depends upon the thicknesses of the exposed and base layers. The built-in electrostatic field and the surface recombination velocity in the exposed layer influence the quantum efficiency greatly. Optimization studies for the thicknesses of the exposed and base layers of an n-p type germanium for different values of minority carrier diffusion length, built-in electrostatic field, and surface recombination velocity have been worked out.     

Prototype design and testing of a Venus long duration,high altitude balloon

This paper describes the design, fabrication and testing of a full scale prototype balloon intended for long duration flight in the upper atmosphere of Venus. The balloon is 5.5 m in diameter and is designed to carry a 45 kg payload at an altitude of 55 km. The balloon material is a 180 g/m² multi-component laminate comprised of the following layers bonded together from outside to inside: aluminized Teflon film, aluminized Mylar film, Vectran fabric and a polyurethane coating. This construction provides the required balloon functional characteristics of low gas permeability, sulfuric acid resistance and high strength for superpressure operation. The design burst superpressure is 39,200 Pa which is predicted to be 3.3 times the worst case value expected during flight at the highest solar irradiance in the mission profile. The prototype is constructed from 16 gores with bi-taped seams employing a sulfuric acid resistant adhesive on the outside. Material coupon tests were performed to evaluate the optical and mechanical characteristics of the laminate. These were followed by full prototype tests for inflation, leakage and sulfuric acid tolerance. The results confirmed the suitability of this balloon design for use at Venus in a long duration mission. The various data are presented and the implications for mission design and operation are discussed.