A Detection Algorithm for Optical Targets in Clutter

There is active interest in the development of algorithms for detecting weak stationary optical and IR targets in a heavy opticalclutter background. Often only poor detectability of low signal-to-noise ratio (SNR) targets is achieved when the direct correlation method is used. In many cases, this is partly obviated by using detection with correlated reference scenes [1, 2].This paper uses the experimentally justified assumption that most optical clutter can be modeled as a whitened Gaussian randomprocess with a rapidly space-varying mean and a more slowlyvarying covariance [2]. With this assumption, a new constant falsealarm rate (CFAR) detector is developed as an application of the classical generalized maximum likelihood ratio test of Neyman and Pearson. The final CFAR test is a dimensionless ratio. This test exhibits the desirable property that its probability of a false alarm(PFA) is independent of the covariance matrix of the actual noiseencountered. When the underlying noise processes are complex intime, similar considerations can yield a sidelobe canceler CFARdetection criterion for radar and communications. Performance analyses based on the probability of detection (PD)versus signal-to-noise ratio for several given fixed false alarm probabilities are presented. Finally these performance curves are validated by computer simulations of the detection process which use real image data with artificially implanted signals.     

Comparison of half-bridge off-line, ZCS-QRC and ZVS-MRC

The performance of the half-bridge (HB) zero-current-switched (ZCS) quasi-resonant converter (QRC) and zero-voltage-switched (ZVS) multiresonant converter (MRC) is compared with respect to their efficiency, input voltage range, semiconductor stresses, power density, and reliability. The efficiency of the HB ZVS-MRC at a given nominal input is shown to be highly dependent on the range of the input voltage, and it suffers when the converter has to be designed to cover a wide range. However, this is not the case for the HB ZCS-QRC. Experimental versions of the HB ZCS-QRC and HB ZVS-MRC were designed for the input voltage range from 150 to 350 V and a maximum output power of 100 W, under the same constraints, to facilitate their comparison     

Filtering of discontinuous processes arising in marine integratednavigation systems

A refined stochastic model for the errors of the Loran-C radio navigation aid is described, and it is shown how this model can be used to improve the performance of integrated navigation systems. In addition to the usual propagation errors, Loran-C time of arrival measurements are occasionally plagued with sudden intermittent errors of a particular magnitude and caused by receiver cycle selection errors. These result in sudden large jumps in the calculated position solution. The Loran-C error has been modeled as the sum of a diffusion process, representing the normal propagating errors, and a pure jump process of Poisson type, representing the cycle selection errors. A simple integrated navigation system is then described, based on the Loran-C model and the standard dead reckoning (heading and speed) system model. Assuming that the observed process is governed by a linear stochastic difference equation, a recursive linear unbiased minimum variance filter is developed, from which the Loran-C and dead reckoning errors, and hence position and velocity, can be estimated     

Single-phase power distribution system power flow and faultanalysis

Alternative methods for power flow and fault analysis of single-phase distribution systems are presented. The algorithms for both power flow and fault analysis utilize a generalized approach to network modeling. The generalized admittance matrix, formed using elements of linear graph theory, is an accurate network model for all possible single-phase network configurations. Unlike the standard nodal admittance matrix formulation algorithms, the generalized approach uses generalized component models for the transmission line and transformer. The standard assumption of a common node voltage reference point is not required to construct the generalized admittance matrix. Therefore, truly accurate simulation results can be obtained for networks that cannot be modeled using traditional techniques     

An Adaptive Array Signal Processing Algorithm for Communications

An algorithm is described for initial synchronization in a communication system with a digital adaptive array. This algorithm can also be used for message extraction. A set of consecutive complex video samples of the array output is processed to obtain optimum adaptive array weights, based on a least mean square (LMS) error criterion. This computation is performed for each of the possible alternative signals which may be present during an observation interval. The correct synchronization time or message symbol is selected as the one which yields the minimum LMS error. Assuming orthogonality of the alternative codes, a probability distribution for the output of this processor has been derived.     

Hard Limiter Performance as a Polarity Detector for Extremely Polluted Signals

A hard limiter is a simple, yet highly efficient, RF signal sensor for VLF and LF navigation receivers. The observation reliability is used as the single quality criterion for the hard limiter if applied as a singlebit analog-to-digital converter (ADC). The effects of noise (Gaussian and atmospheric), nonsynchronous and synchronous interference, and dc offset on the observation reliability are described extensively. The single parameter determination Pobs is adequate for characterizing the polarity detector. This facilitates rank ordering of influences disturbing the signal and is a useful tool in optimizing digital tracking loops. The ?built-in? noise-censoring properties of the hard limiter in the presence of atmospheric noise are excellent. Therefore, three different atmospheric noise models are used in the determination of the observation reliability Pobs. Some ways for coping with other disturbances that potentially threaten the good performance of the hard limiter are suggested.     

Optical identification of X-ray sources in the Einstein observatory medium and deep surveys

Methods are discussed for establishing the optical identification of X ray sources in the medium and deep X-ray surveys of the Einstein Observatory. Of the 63 X-ray sources with a statistical significance of 5 in the medium survey (Maccacaro et al. 1981), optical identification work is summarized for 51, of which identifications have been made with 30 active galactic nuclei. The optical properties of some of these X-ray selected objects are briefly discussed.The Einstein deep survey of Pavo (Griffiths et al. 1981) is used to illustrate the problems and methods used for securing optical identifications for X-ray sources in the deep survey fields. Identifications have been made with 4 QSOs at the bright end of the optical candidate distribution (together with 3 G stars) and it is shown that a further 7 fainter objects are also likely to be QSOs.     

Analysis and Design of Series Resonant Converter by State-Plane Diagram

Analysis based on the state-plane diagram is given for series resonant converters operating in the frequency range 0.5 ? fs/fo ? 1.0. When the voltages and currents in the converter are normalized, design parameters take on special geometric meanings in the normalized state diagram. Examples of converter design using graphical methods are given for the cases of ? and ? control. Control characteristics of the converter operating in the continuous conduction mode are derived. The concept of the energy reflection coefficient is introduced as a measure of power transfer efficiency in the converter design.     

An X-ray study of M51 (NGC 5194) and its companion (NGC 5195)

Observations of NGC 5194/95 with the Einstein HRI show a very strong nuclear X-ray source, surrounded by a diffuse flux, three point sources and the companion. The diffuse flux, which correlates well with the radio continuum, is likely to originate from the disk population with age 2·10⁹ yrs. The large luminosity from the nuclear source, together with optical and radio observations, shows that it belongs to the low luminosity active nuclei, thus extending this class to luminosities less than 10⁴⁰ erg/s.     

Some crucial X-ray observations — One or two SNR(s) in Crux?

A new EXOSAT (LE/CMA) observation of the region in Crux (R.A. 11h 45m, Dec. -62°) where Markert et al. (1981) reported the existence of two x-ray SNR's is presented. After cleaning the CMA field from the point source component, due to the UV emission of the numerous stars in the field, the smoothed x-ray contours are compared to the 408 MHz radio map of Caswell et al. (1983). The existence of two, well-separate x-ray emission regions is confirmed by EXOSAT, and the current x-ray/radio picture is not sufficent to distinguish clearly between the assumption of one or two (possibly interacting) SNR's in the region.