民用飞机燃油箱系统闪电防护分析方法研究

民机燃油箱系统的闪电防护是燃油箱安全的重要研究范畴,本文依据FAA的25-146号修正案和咨询通告AC25.954-1,介绍了民用飞机燃油箱系统闪电防护分析方法。在点火源防护分析思路的基础上,针对闪电引起的点火源,在明确飞机闪电分区后,可通过容错类设计或非容错类设计分别开展分析。针对容错类设计,可仅通过证明防护设计特征有效且可靠来表明符合性,无需进一步分析失效概率。针对非容错类设计,通过定性和定量分析法进行评估。在定性分析时,需评估非容错特征失效且引起点火源的概率小于1E-5。在定量分析中,可结合燃油箱可燃性、关键闪电和防护特征失效概率确保闪电引起燃油蒸气点燃的概率为极不可能。同时,根据闪电环境定义的电流振幅和波形对防护设计特征进行有效性验证。     

多芯片组件（MCM）用金锡焊带材料电阻率及热导率温度特性研究

对牌号为Au₈₀Sn₂₀的金锡焊带材料在208~423 K的电阻率及热导率与温度的函数关系进行了研究,并对其在多芯片组件（MCM）中的传热效果进行了评估。分别对材料在208~423 K中5个温度点的电阻率及4个温度点的热导率进行了测试,基于理论模型建立电阻率/热导率随温度变化的函数关系,最终采用模拟热扩散数值方法评估材料在高温下的传热能力。结果表明,采用修正函数模型后,金锡焊带材料在208~423 K下热导率与电阻率的关系符合测试结果,随芯片表面温度的边界条件从208 K升高至423 K,采用变温热导率模型得到的热流密度模拟计算结果相比理想化恒定热导率模型的差异性逐渐升高至5.5%。综上,金锡焊带材料热导率与电阻率的关系符合Wiedemann-Franz法则修正后的Smith-Palmer方程,在该材料传热设计时应考虑其热导率温度效应。     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

(70~100)MeV准单能中子参考辐射场设计

国内基于串列加速器建立了144keV~15MeV的单能中子参考辐射场,解决了20MeV以下能区中子探测器注量、剂量等参数的量值溯源,但尚未建立20MeV以上能区准单能中子参考辐射场。随着航天空间中子探测任务的需要以及地面高能质子加速器的发展,20MeV以上能区准单能中子参考辐射场需求越来越突出。发展20MeV以上能区高能中子参考辐射场对于满足国防需求、推动中子计量学科发展具有重要意义。     

新电位移边界条件下的压电介质断裂问题

应用边界元法,并结合一种特殊的复变函数基本解,研究了压电介质的断裂问题。由于该基本解完全遵循本构方程没有对电位移边界作假设,所以结论同非穿透性裂纹假设的结果有较大差异。通过计算表明,外加力载荷不但会引起裂纹尖端应力奇异性,也会引起电场奇异性,同样,外加电压也会引起裂纹尖端应力奇异性。     

基于纯文本数据文件的APDL与MATLAB的混合建模方法研究

通过对有限元软件ANSYS有限元模型生成方法的介绍和对比,提出基于纯文本数据文件的APDL与MATLAB的混合建模方法,并以建立单齿模型为例,在ANSYS中导人在MATLAB程序生成的数据文件,实现参数化建模。     

Ni3Al（Zr）合金的高温环境脆性

Ni3Al(Zr)合金在700～1 050°C之间存在低塑性区,无论在空气还是在真空中,都表现出脆性的沿晶断裂,塑性很低.在拉伸过程中形成的致密氧化铝薄膜能够有效地阻止氧向基体中扩散,减少环境脆性,提高合金的高温塑性.活性元素Zr能够与氧原子相互作用,减少裂纹沿晶界扩展,改善合金的高温塑性.     

循环微粒(细胞外囊泡)在心血管外科领域的研究进展

循环微粒(细胞外囊泡)在血管调节、炎症、凝血、细胞增殖与凋亡等生物过程中具有细胞间传递信息的功能。 所含成分复杂多样,与心血管疾病的发生发展过程联系紧密。循环微粒(细胞外囊泡)未来可以作为反映凝血功能、炎症反应、组织器官损伤的临床标志物,或者是调控血管稳态、纠正凝血、改善内环境、保护组织器官功能的临床治疗靶点,具有重要的研究意义。本文总结循环微粒(细胞外囊泡)在心血管外科领域的相关研究进展,讨论循环微粒(细胞外囊泡) 在相关疾病过程中所起的作用,及其在相关疾病诊断与治疗当中的研究及应用前景。     

锦纶材料空间环境适应性研究

为研究锦纶材料在长寿命在轨航天器中的环境适应性,提出了锦纶材料在空间环境使用的空间环境适应性评价指标,设计并实施了空间环境适应性评价试验。试验结果表明,锦纶材料在燃烧性能、逸出有害气体、真空质损和可凝挥发物、抗菌防霉、耐受交变温度、电离辐射中表现出友好的环境适应性。锦纶材料在受到空间环境中原子氧、紫外辐射作用时断裂强力明显下降,且原子氧与紫外辐照协同效果对锦纶材料的力学性能破坏具有加强效果。锦纶材料可作为空间舱内环境长期使用材料,在舱外环境使用时,需要特别考虑其力学特性受到原子氧、紫外辐照的影响。