Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

基于套裁的复合材料铺叠料片排版技术研究

从实际生产经验出发,探索了提高材料利用率的方法。通过对矩形和异形铺叠料片算法分析,制定了最佳放置策略规则。通过对蒙皮余量的修改工艺性验证后,对余量设置提供了参考依据,创造性地提出了通用零件余量设定原则,减少由于余量设置不精确造成的浪费。通过套裁方案的实施,切实有效地减少了材料的浪费,提高了原材料的利用率。     

高温高速气流总焓接触测试法对比分析

发动机尾焰、燃烧加热、电弧加热器等高温高速气流总焓测量存在较大误差,采用结构优化的质量吸入水冷焓探针,标定后的驻点热流和驻点压力探针(Fay-Riddell公式法)对高温高速气流总焓进行了对比测试。结果表明:焓值为2.5~5 MJ/kg时,焓探针的测试误差约为3.38%,采用Fay-Riddell公式法获得焓值的误差约为3%。焓探针与Fay-Riddell公式法平均偏差约为4.65%。在地面模拟试验时采用两种测焓方法确定测试精度,对减小高温高速气流测焓误差,提高试验模拟精度具有积极的作用。     

跨介质航行器流体动力外形仿生设计

跨介质航行器是一种可在空中与水中两栖巡航并能自由穿越水气界面的新概念海空两栖无人运动平台,需要具备良好的入水和出水性能及较小的水下流体阻力。采用两种生物组合仿生的设计思想,利用全自动三维影像扫描仪获取具有优良入水性能的翠鸟头部和龙虱身体的形体特征点云数据,应用傅立叶级数拟合方法拟合特征曲线,设计了一种跨介质航行器流体动力外形,为减小航行器入水冲击载荷、降低水下航行阻力提供了设计方案。     

臭氧对羰基铁粉-CSM吸波涂层的影响

进行了改性羰基铁粉-氯磺化聚乙烯(CSM)吸波涂层的臭氧环境暴露试验,并利用SEM、XRD、IR、DSC和TG等方法研究了臭氧对其表面结构和性能的影响。结果表明,臭氧造成CSM表层分解,部分羰基铁粉脱落,但未影响改性羰基铁粉的相组成,对涂层吸波性能的影响不显著。     

基于壁面压力分布的非对称喷管反设计

针对目前非对称喷管的设计方法上的缺陷,给出了通过指定壁面压力分布规律来反设计其膨胀面型线的方法,获得了膨胀面型线反设计程序,并结合优化算法寻找综合性能较好的喷管壁面压力分布.将采用该方法设计得到的喷管模型与最大推力喷管进行了对比研究.结果表明:在设计点,该喷管的推力系数比最大推力喷管只降低0.102%,而升力和俯仰力矩分别提升2.295%和15.774%.验证了设计思想的正确性,为非对称喷管的设计提供了一种高效的设计方法.      

短距起飞/垂直降落发动机建模技术研究

参考常规双轴涡扇发动机数学模型,建立了适用于短距起飞/垂直降落(STOVL)飞机的变循环发动机部件级数学模型;通过特性外推,建立了轴驱动升力风扇数学模型;采用神经网络映射涵道总压损失的方法,建立了滚转喷管和外涵模型.根据STOVL发动机结构和部件变化特点,建立了稳态和动态共同工作方程.参照国外文献仿真数据进行设计点计算,并按照Bevilaqua提出方法开展了由常规涡轮风扇模式到悬停涡轮轴模式的过渡态仿真.仿真结果表明:建立的数学模型在悬停状态设计点和高空巡航点与国外文献数据相比误差均小于1.5%,推力达到悬停状态要求,符合STOVL发动机的设计特点,验证了该建模方法的有效性.      

煤油及其替代燃料点火延迟特性实验研究

为研究煤油的点火特性,在反射型激波管中测量了煤油及替代燃料的点火延迟时间。通过测量激波压力信号和OH自由基光强信号,分析了点火温度、当量比对煤油点火延迟时间的影响。实验温度范围为1100~1800K,压力为0.1MPa,反应当量比为0.5,1.0,1.5。选用正癸烷(80%)和三甲基苯(20%)组成的替代燃料,在相同实验条件下比较了替代燃料对煤油点火模拟的准确性。结果表明随着点火温度升高和当量比的降低,煤油及其替代燃料的点火延迟时间缩短,点火延迟时间的对数与温度倒数成正比。选定的替代燃料可以较好地模拟实际煤油的点火延迟过程。     

Ionospheric response of equatorial and low latitude F-region during the intense geomagnetic storm on 24–25 August 2005

In this investigation, we present and discuss the response of the ionospheric F-region in the South American and East Asian sectors during an intense geomagnetic storm in August 2005. The geomagnetic storm studied reached a minimum Dst of −216 nT at 12:00 UT on 24 August. In this work ionospheric sounding data obtained of 24, 25, and 26 August 2005 at Palmas (PAL; 10.2° S, 48.2° W; dip latitude 6.6° S), São José dos Campos (SJC, 23.2° S, 45.9° W; dip latitude 17.6° S), Brazil, Ho Chi Minh City, (HCM; 10.5° N, 106.3° E; dip latitude 2.9° N), Vietnam, Okinawa (OKI; 26.3° N, 127.8° E; dip latitude 21.2° N), Japan, are presented. Also, the GPS observations obtained at different stations in the equatorial and low-latitude regions in the Brazilian sector are presented. On the night of 24–25 August 2005, the h′F variations show traveling ionospheric disturbances associated with Joule heating in the auroral zone from SJC to PAL. The foF2 variations show a positive storm phase on the night of 24–25 August at PAL and SJC during the recovery phase. Also, the GPS-VTEC observations at several stations in the Brazilian sector show a fairly similar positive storm phase on 24 August. During the fast decrease of Dst (between 10:00 and 11:00 UT) on 24 August, there is a prompt penetration of electric field of magnetospheric origin that result in abrupt increase (∼12:00 UT) in foF2 at PAL, SJC (Brazil) and OKI (Japan) and in VTEC at IMPZ, BOMJ, PARA and SMAR (Brazil). OKI showed strong oscillations of the F-region on the night 24 August resulted to the propagation of traveling atmospheric disturbances (TADs) by Joule heating in the auroral region. These effects result a strong positive observed at OKI station. During the daytime on 25 August, in the recovery phase, the foF2 observations showed positive ionospheric storm at HCM station. Some differences in the latitudinal response of the F-region is also observed in the South American and East Asian sectors.     

GEO/IGSO混合区域导航星座的设计与优化算法

区域导航星座能够以较低成本和较短时间获得目标区域导航能力,且地球同步轨道是构建非极区区域导航星座的重要轨道类型.提出一种基于GEO(地球静止轨道)和IGSO(倾斜地球同步轨道)的区域导航星座设计方法.基于星下点轨迹特性构造对称星座设计参数和优化参数集,并考虑地球扁率长期摄动影响,计算星座轨道参数.以导航服务区的统计GD...