新型弹簧床结构的HAN基发动机技术

为改善硝酸羟胺(HAN)基发动机催化剂在长时间工作的工况下容易发生破碎而产生空穴的现象，本文提出一种新型弹簧床结构发动机设计方法，对发动机催化床进行改进优化设计。该设计可实现，常温环境下弹簧所提供的最大弹力不足以压碎催化剂；同时在高温环境下，弹簧的最小弹力足以克服催化床受到的流动阻力，可大幅提高发动机工作寿命、性能和可靠性。为验证该设计方法的有效性，分别开展了传统结构和新型弹簧床结构的HAN基1N发动机温启动试验。试验结果表明：在相同试验条件下，传统结构1N发动机温启动次数不超过150次，而使用新型弹簧床结构的1N发动机温启动次数超过了500次，且工作性能更优。试验结果证明了该设计方法的有效性，为HAN基发动机长寿命可靠工作奠定了良好的技术基础。     

A lunar cargo mission design strategy using variable low thrust

A design technique for a near optimal, Earth–Moon transfer trajectory using continuous variable low thrust is proposed. For the Earth–Moon transfer trajectory, analytical and numerical methods are combined to formulate the trajectory optimization problem. The basic concept of the proposed technique is to utilize analytically optimized solutions when the spacecraft is flying near a central body where the transfer trajectories are nearly circular shaped, and to use a numerical optimization method to match the spacecraft’s states to establish a final near optimal trajectory. The plasma thruster is considered as the main propulsion system which is currently being developed for crewed/cargo missions for interplanetary flight. The gravitational effects of the 3rd body and geopotential effects are included during the trajectory optimization process. With the proposed design technique, Earth–Moon transfer trajectory is successfully designed with the plasma thruster having a thrust direction sequence of “fixed-varied-fixed” and a thrust acceleration sequence of “constant-variable-constant”. As this strategy has the characteristics of a lesser computational load, little sensitivity to initial conditions, and obtaining solutions quickly, this method can be utilized in the initial scoping studies for mission design and analysis. Additionally, derived near optimal trajectory solution can be used as for initial trajectory solution for further detailed optimization problem. The demonstrated results will give various insights into future lunar cargo trajectories using plasma thrusters with continuous variable low thrust, establishing approximate costs as well as trajectory characteristics.     

圆度误差评定方法及圆度误差统计分布的研究

现行的形状误差标准和形状误差评定方法是建立在几何学基础上的形状公差带问题.作者在研究回转体零件圆度误差评定方法的基础上,提出统计圆度误差的概率分布,并进行实验测量和数据采集,将拟合后的圆度误差利用数理统计的方法得出统计分布结果,证明符合一定的概率分布规律.     

Experimental investigation on impingement-effusion film-cooling behaviors in curve section

A new series of test pieces with different geometrical configuration and geometry dimensions are designed to experimentally investigate on impingement-effusion cooling behavior in curve effusion wall of combustion chamber. The test results show that the discharge coefficient increased with the increasing blowing ratio. The effusion hole–hole spacing has an effect on the discharge coefficient and the discharge coefficient commonly decreased with the increment of effusion hole–hole spacing. The blowing ratio greatly effects cooling behavior. The bigger blowing ratio is favorable for improving cooling characters. At the curved effusion wall, to begin with, cooling effectiveness increased slowly and kept a steady value in subsequence. But, for the rear end of curved effusion wall, it decreased slowly. With decreasing of effusion hole angle and effusion hole–hole spacing, cooling effectiveness is enhanced. Meanwhile, blowing ratio, effusion angle and effusion hole–hole spacing take an evident effect on the discharge coefficient.     

球载高能天文望远镜的超视距自动跟踪

本文在HAPI-4原有系统的基础上，利用80C196超16位单片机，首次实现了球载姿态指向控制系统的数字化；借助于全球卫星定位系统GPS，实现了气球位置的高精度定位和时间的绝对定标；采用小型高密度磁带机作为球载数据流存储器，利用海事卫星实现超视距测控，形成了新一代的球载高能望远镜控制系统．     

一种嵌入式仓库智能监控报警终端设计

针对中小型企业仓库管理智能化发展需要,结合现代计算机图像处理、模式识别等相关技术,设计一种移动图像智能监控报警终端。终端采用三星公司最新推出的基于ARM11架构的S3C6410芯片作为处理器,还应用Linux2.6.36版本内核和initramfs起根文件系统。文中给出终端硬件组成、整体结构及软件设计。终端测试结果达到预期,可以实时监测摄像头范围之内的场景,当监控图像发生变化时立即报警。     

基于加权全变差最小化的中子外部CT重建算法

针对中子外部CT检测需求，提出了基于加权方向全变差（WDTV）最小化的中子外部CT重建算法。首先，利用平行束数据对称性原理将正弦图中旋转中心另一侧缺失的投影数据进行补充；其次，采用传统FBP算法进行了外部CT扫描模式下的CT重建。为了抑制传统FBP、SART算法重建图像中径向边缘伪影，采用WDTV算法计算沿径向和周向方向的局部方向差分并作加权和。另外，在重建模型的WDTV项中引入2个权重参数以控制径向边缘和切向边缘的不同响应强度。最后，采用所提算法研究了重建图像质量与投影数据量的关系。计算机仿真和真实冷中子实验表明:基于WDTV最小化的中子外部CT重建算法能够有效抑制径向边缘伪影，获得高质量重建图像。      

Enhanced multipath mitigation method based on multi-resolution CNR model and adaptive statistical test strategy for real-time kinematic PPP

This study proposes an enhanced multipath mitigation method based on multi-resolution carrier-to-noise-ratio (CNR) model and adaptive statistical test strategy for real-time kinematic precise point positioning (PPP) applications. The multi-resolution CNR model is established with GPS observation data collected from DOY 152 to 181 of 2019 by 230 globally distributed IGS stations, which used to analyze the relevant factors affecting CNR. Statistical results indicate that the CNR is not only related to the satellite elevation, but also closely related to the receiver types and specific satellite. The maximum difference between different receivers can reach 20 dB for the same satellite at the same elevation. In addition, the performance of the CNR is also obviously different between each satellite, and the maximum difference between different satellites is about 10 dB for the same receiver at the same elevation. Hence, in terms of the method which is based on CNR information for multipath detection and mitigation, the independence of receiver types, satellite and frequency must be considered. With the above analysis, this study developed a multi-resolution CNR model based on different receiver types, different satellites and different elevation firstly. Then, combined with the adaptive statistical test strategy which is based on the difference of CNR between inter-frequency and the difference of CNR between adjacent epochs, the multipath can be detected effectively. For the epoch which affected by multipath, the down-weighted strategy based on CNR is adopted to mitigate the influence of multipath on positioning. Real-time kinematic PPP data are collected to assess the proposed method, and the results demonstrate that the proposed method can detect the multipath effectively, and the detection rate can reach 90.28%. Moreover, after adopting the mitigation strategy, the RMS bias of the east, north and up components are improved about 19.95%, 17.89% and 23.07% compared to the original results, respectively. It is worth noting that this proposed method is also suitable for other GNSS, such as GLONASS and BDS, but the corresponding CNR model must be established simultaneously.     

双向不对称同步数据业务接入设计

根据数据传输设备业务板卡功能特点,采用2个端口绑定的方式解决了双向不对称同步数据业务接入问题,针对链路调试过程中出现的数据传输不稳定现象,通过测试接口信号波形质量和时序关系,发现发送定时信号占空比及其与发送数据间的时序关系不符合相关标准要求,分析对此产生的影响并提出相应解决方案。通过对不同方式实施效果的分析评估,确定了设备连接状态,实际测试验证与理论分析结果完全相符,提高了传输的稳定性和可靠性,并在重要数据传输工程中得到应用,可为解决同步数据传输不稳定问题提供参考。     

基于功率裕度的某型发动机全寿命性能研究

随着使用时间不断增加,研究飞行队所有选装ARRIEL2S系列发动机全寿命性能变化趋势的必要性突显.针对SRRIEL2S系列发动机全寿命性能参数变化特点,提出使用基于可几误差舍弃理论处理发动机功率校验数据,分区间描绘该系发动机全寿命性能指标变化趋势,给出该系发动机全寿命性能特点,为机务工程人员监控该系发动机提供有利依据；提出延长功率校验间隔的假设,并在理论上做了充分论证,为节约该系发动机运行成本提供一个明确及可行的方向.