转子扭转振动测量的新方法

创立了一种测量转子扭转振动的新方法。该方法通过设计专门测扭装置直接提取和分析由转子扭振转化的动应变信号从而获知转子扭振特征,并利用电阻应变计的空间对称结构,实现了信号的加强、补偿以及多通道冗余功能。实测结果表明,该方法具有准确性好、灵敏度高、安装简易、操作方便的特点,是一种具有广泛发展前景的转子扭振测量新技术。     

基于近似技术的高亚声速运输机机翼气动/结构优化设计

探索基于近似技术的高亚声速运输机机翼气动/结构多学科设计优化方法,建立了基于近似技术的多学科设计优化框架。气动学科采用全速势方程加黏性修正进行翼身组合体跨声速流动的气动计算,结构学科采用有限元分析方法进行应力与变形计算。采用均匀设计法给出若干样本点,分别采用二次响应面、Kriging模型和径向基神经网络等多种近似技术,构造气动学科和结构学科的近似分析模型,并对几种近似模型精度进行了分析和比较。研究发现,Kriging模型和二次响应面具有几乎等同的较高的近似精度,神经网络的近似精度则较差,由于二次响应面计算量更小,故最终选定为机翼设计优化的近似方法。以升阻比和结构重量为目标,考虑升力、机翼面积以及应力和应变约束条件,对运输机机翼4个外形参数和4个结构参数进行多目标、多约束优化设计。优化后的机翼具有较好的气动/结构综合性能,表明本文方法是可行的。     

整体加筋壁板的破损安全特性与断裂控制分析

用有限元和断裂力学方法分析大型整体机翼下壁板的破损安全特性。对一个九桁条铝合金整体加筋板,裂纹从断裂筋条下向两侧均匀扩展的开裂形式,进行了应力强度因子和剩余强度计算,并和另一个具有相同构形的铆接加筋板的结果进行对比。当裂纹长度在两倍桁条间距以内时两种加筋板的剩余强度水平相当。但是当整体壁板中的裂纹穿过外侧相邻桁条时,整体桁条的止裂能力逐渐减弱。研究对整体壁板蒙皮胶接止裂条的断裂控制措施及有限元建模分析方法,描述止裂条胶层局部脱粘的处理方法和迭代过程。止裂条材料分别选用了钛合金和单向层压复合材料。计算结果说明胶接止裂措施能显著提高整体加筋板的破损安全性能。     

大功率拖动及控制在旋翼试验塔中的应用

介绍了大功率变频拖动系统在旋翼试验塔中的设计方案,它采用s7-300plc的控制,使其具有优越控制性能和良好的动特性,经过试验证明能很好的达到各项技术性能指标。     

基于约简遗传规划的线参数模型及在航空发动机起动建模中的应用

提出了一种新的约简遗传规划(PGP)算法和一种新的基于约简遗传规划的航空发动机起动动态线参数模型.这种模型采用遗传规划产生航空发动机起动模型的输入输出非线性模型集,并以二叉树结构表征函数项,运用正交最小二乘算法(OLS)估计二叉树分支(基本函数项)对于模型精度的贡献并去除复杂、冗余的函数项,从而加快遗传规划的收敛速度,最后通过GP进化可获得简单、可靠、准确的线参数非线性模型.发动机起动过程试车数据建模和与支持向量机的比较证明,这种方法可以产生适用性好、解析性强的线参数非线性模型,产生的模型可获得与支持向量机相当甚至更优的结果.     

Thermal Fatigue Behavior of Ni_3Al Based Superalloy IC6E

The thermal fatigue behavior of Ni3Al based superalloy IC6E during the cycles between 900 ℃/1 000 ℃ and the room tempera-ture was investigated. The experimental results indicate that the primary and secondary thermal fatigue cracks initiate inside or round the borides and then spread away along grain boundaries and/or in interdendritic areas. The fracture of borides and their separation from the matrix at interfaces are mainly responsible for the crack initiation and its spreading. At temperatures higher than 1 000 ℃, the grain boundary oxidation combined with cyclic stresses accelerates the crack growth.     

Combustion Synthesis of h-BN-SiC Ceramic Composites

The feasibility was demonstrated to fabricate h-BN-SiC ceramics through combustion synthesis of the mixture of boron carbide and silicon powders under 100 MPa nitrogen pressure. The mass fraction of BN and SiC in the combustion products were found to be 72 % and 28 % respectively. The thermodynamics of the synthesis reaction and the adiabatic combustion temperature were calculated on the theoretical ground. The bending strengths of the ceramics were measured to be 65.2 MPa at room temperature and 55 MPa at 1350 ℃. The phase composition and microstructure of the combustion products were identified by X-ray diffraction (XRD) and scanning electron microscopy (SEM).     

Kinetic Monte Carlo Simulation of EB-PVD Film:Effects of Substrate Temperature

The 2D kinetic Monte Carlo (KMC) simulation was used to study the effects of different substrate temperatures on the microstruc-ture of Ni-Cr films in the process of deposition by the electron beam physical vapor deposition (EB-PVD). In the KMC model, substrate was assumed to be a “surface” of tight-packed rows, and the simulation includes two phenomena: adatom-surface collision and adatom diffusion. While the interaction between atoms was described by the embedded atom method, the jumping energy was calculated by the molecular static (MS) calculation. The initial location of the adatom was defined by the Momentum Scheme. The results reveal that there exists a critical substrate temperature which means that the lowest packing density and the highest surface roughness structure will be achieved when the temperature is lower than the smaller critical value, while the roughness of both surfaces and the void contents keep decreasing with the substrate temperature increasing until it reaches the higher critical value. The results also indicate that the critical substrate temperature rises as the deposition rate increases.     

Preparation,Growth Mechanisms and Characterizations of ZnSe Films via the Solvothermal Method

With diethylamine as a solvent, ZnSe films were formed on the Si substrate directly from zinc and selenium through the modified solvothermal method. The effects of holding temperature, deposition time and substrate surface treatment on the quality and morpholo-gies of the ZnSe films were investigated. The growth mechanism of ZnSe films was proved to be a layer-nucleation growth process, which was tied in with the Stranski-Krastanov (SK) model. ZnSe films were identified by the X-ray diffraction pattern (XRD), the scan-ning electron microscope (SEM), the X-ray photoelectron spectroscope (XPS) and the photoluminescence (PL) techniques. The results indicate that the modified solvothermal method with diethylamine as a solvent is suitable to prepare high quality ZnSe films.     

基于粗糙集理论的证券分析系统数据融合

将粗糙集理论应用于证券分析系统,探讨了相容状况下基于粗糙集理论的数据处理方法,并给出了系统结构和融合方法。该方法以局部决策作为条件属性,融合中心采用粗集理论方法对局部决策进行处理,包括知识表达、化简,最后给出决策规则。从结果来看,采用该方法不需要先验概率,也不需要隶属函数,同时还可以去除冗余的局部决策,使系统的配置最优化、提高了系统的运行速度。