脉冲爆震燃烧室出口燃气能量分布特性

为了提高脉冲爆震燃烧室出口燃气能量转换效率,采用数值计算方法,研究了带气动阀和爆震增强结构的脉冲爆震燃烧室出口燃气能量分布特性,结果表明:脉冲爆震燃气的膨胀过程先后经历一次膨胀、二次膨胀和过度膨胀3个阶段,单个周期内二次膨胀阶段的时间和能量占比最大;燃烧室出口燃气压力势能、动能、内能和能流密度的分布主要受燃气压力的影响,且变化规律与燃气压力一致;一次膨胀阶段燃气增加的压力势能、动能、内能分别占单个周期的479%、259%、251%;二次膨胀阶段燃气增加的压力势能、动能、内能分别占单个周期的502%、576%、581%。     

突加不平衡下GTF发动机转子系统瞬态响应分析

针对GTF发动机低压转子系统突加不平衡瞬态响应问题,基于有限元法建立了考虑啮合单元、行星架单元、膜盘联轴器单元的多体接触、多转子耦合动力学模型,介绍了考虑非线性因素下突加不平衡瞬态响应计算方法,求解了低压转子系统的突加不平衡瞬态响应,并分析了关键部件刚度对突加不平衡的影响规律。结果表明：当风扇转子发生突加不平衡时,各部件均表现为振动幅值突增,后迅速趋于稳定,低压涡轮转子发生明显拍振,突加不平衡载荷主要由行星架结构和第1.5支点刚性支承承担;行星架刚度主要影响风扇转子突加不平衡响应、第1.5支点和行星架处的外传力;膜盘联轴器刚度主要影响增压级突加不平衡响应、转子在突加不平衡之后稳定运转情况。     

镍锌铁氧体吸波材料研究进展

综述了镍锌铁氧体吸波材料的研究情况。从磁性能、配方对吸波性能的影响,以及与其他材料复合对吸波性能的影响等方面,对镍锌铁氧体吸波材料进行比较全面的总结,并与我司研究情况进行对比,希望对镍锌铁氧体吸波材料的开发与应用提供支持。     

小型化超宽带H面脊喇叭端射天线

超宽带天线技术是实现射频孔径综合的关键技术之一,适用于解决大型电子信息系统中采用多个天线带来的布局困难、互相干扰等问题。本文设计了一款具有端射特性的小型化超宽带H面脊喇叭天线。天线通过加载指数型脊结构,降低了矩形波导的截止频率,从而大幅展宽了天线工作带宽。同时,通过在喇叭口加载单曲面形介质透镜,改善了辐射口面上相位不均匀的问题,进而显著提高了天线的端射增益。该天线结构紧凑,其尺寸仅为0.57λ_L×0.45λ_L×0.11λ_L,可覆盖0.8 GHz～18 GHz的超宽频带,且交叉极化优于30 dB。该天线剖面低、结构稳定、易于加工,可直接安装于金属结构上,易于与载体集成。通过与同类型端射天线相比可知,该天线在小型化和电性能两方面都具有优越性。     

基于表观细粒度辨别网络的近海船舶目标检测方法

近海船舶目标检测是一项非常具有挑战性的任务,受到学者专家广泛关注。基于卷积神经网络（CNN）和注意力机制的检测器在近海船舶目标检测方面的应用取得了显著成就。然而,船舶目标检测存在着表观相似和背景干扰导致检测过程中出现误检的问题。为此,本文提出了一种用于Faster RCNN（更快的基于区域的卷积神经网络）的表观细粒度辨别的检测头模块。该模块包括类别细粒度分支和高效全维动态卷积定位分支。其中类别细粒度分支通过全局特征建模和灵活的感知范围来挖掘和利用类别细粒度辨别特征,高效全维动态卷积定位分支通过高效灵活的感知船舶边界信息来区分目标与背景,从而减少误检漏检问题。通过在近海船舶公开数据集Seaships7000 上进行实验验证,本文算法减少了误检漏检,提升了检测器性能。     

论新闻报料

新闻报料具有扩大新闻源、丰富新闻内容、增强新闻地方化色彩、强化媒体舆论监督作用等积极作用,但也弱化了新闻的真实性原则、媒体社会功能与社会责任感,应从建立科学规范的报料核实体制,加强通讯员队伍与新闻线人的建设与培养,加强对媒体及媒体市场的管理等方面来规范新闻报料。     

Torque Distribution of Electric Vehicle with Four In-Wheel Motors Based on Road Adhesion Margin

With the worsening of energy crisis and environmental pollution,electric vehicles with four in?wheel motors have been paid more and more attention. The main research subject is how to reasonably distribute the driving torque of each wheel. Considering the longitudinal motion,lateral motion,yaw movement and rotation of the four wheels,the tire model and the seven DOF dynamic model of the vehicle are established in this paper. Then,the torque distribution method is proposed based on road adhesion margin,which can be divided into anti ? slip control layer and torque distribution layer. The anti?slip control layer is built based on sliding mode variable structure control,whose main function is to avoid the excessive slip of wheels caused by road conditions. The torque distribution layer is responsible for selecting the torque distribution method based on road adhesion margin. The simulation results show that the proposed torque distribution method can ensure the vehicle quickly adapt to current road adhesion conditions,and improve the handling stability and dynamic performance of the vehicle in the driving process.     

Dynamics and de-spin control of massive target by single tethered space tug

This paper investigates the dynamics and de-spin control of a massive target by a single tethered space tug in the post-capture phase. The dynamic model of the tethered system is derived and simplified to a dimensionless form. Further, a decoupled PD controller is proposed, and the local stability of the controller is analyzed by linearization technique. Parametric studies of the dynamics and de-spin control of a massive target are conducted to characterize the dynamic process of de-spin with the proposed control law. It is shown that the massive target can be de-span by a single and small space tug with limited thrust within finite time. The thrust tangent with the tether de-spins the target while the thrust normal to the tether prevents the tether from winding up the target. The tether length has a positive contribution to the de-spin of a target. The longer tether leads to a faster de-spin process.     

窄带信号小样本谱估计算法

针对窄带平稳随机信号的小样本谱估计问题,结合均匀线性阵列的空间谱估计算法,提出了一种高性能小样本谱估计算法。该算法首先利用采样数据构造一个Toeplitz矩阵;然后对该矩阵进行特征值分解得到信号子空间和噪声子空间;再结合MUSIC、ESPRIT等子空间算法,即可实现对小样本采样数据的谱估计。数值仿真验证了该算法的有效性。     

某燃气涡轮工作叶片裂纹分析

为阐明测试单元环境下加速任务试车(AMT)过程中叶片早期起裂的物理原因,对裂纹叶片断口进行了检查和分析,并采用LPTi's XactLIFETM系统对叶片进行了深入的分析.结果表明:叶片叶型发生了过量的蠕变损伤,此过量的蠕变损伤导致了叶片的过量延伸以及叶型特别是在尾缘区域的转扭,此行为可能造成AMT疲劳循环条件下缘板以下的叶片伸根部位疲劳裂纹的形核与生长.因此,过量的蠕变被认为是整个裂纹形核过程的主要驱动力.