Experimental Investigation on Performance of Pulse Detonation Rocket Engine Model

The PDRE test model used in these experiments utilized kerosene as the fuel, oxygen as oxidizer, and nitrogen as purge gas. The solenoid valves were employed to control intermittent supplies of kerosene, oxygen and purge gas. PDRE test model was 50 mm in inner diameter by 1.2 m long. The DDT （deflagration to detonation transition） enhancement device Shchelkin spiral was used in the test model. The effects of detonation frequency on its time-averaged thrust and specific impulse were experimentally investigated. The obtained results showes that the time-averaged thrust of PDRE test model was approximately proportional to the detonation frequency. For the detonation frequency 20 Hz, the time-averaged thrust was around 107 N, and the specific impulse was around 125 s. The nozzle experiments were conducted using PDRE test model with three traditional nozzles. The experimental results obtained demonstrated that all of those nozzles could augment the thrust and specific impulse. Among those three nozzles, the convergent nozzle had the largest increased augmentation, which was approximately 18%, under the specific condition of the experiment.     

一种基于控制流的复杂系统故障树自动建树方法

复杂系统中故障以控制流的形式传递,其输出变量偏差于正常输出变量可用不同的控制流描述,根据控制流进行故障树的自动建立,可设计四个模块将变量传递关系用数据表示出来.首先,定义各种数据结构把控制系统中各种变量量化在具体的数据当中,然后通过识别控制环算法和故障树自动建树算法建树,最后,把连接好的故障树数据转化为二叉树数据结构,用可视化语言把故障树显现出来.     

顺序图的形式化方法描述

UML是一种可视化的图形语言,已成为面向对象方法中事实上的工业标准,得到了广泛应用.但是UML缺乏精确的语义描述,不便于使用工具对其进行分析和验证.形式化B方法基于严格的数学理论,按照抽象机的方式理解系统.为了使UML表达的语义更加明确,同时发挥形式化方法的优势,采用B方法对UML中的顺序图进行描述.     

Progress Report of Space Life Science in China

In the past two years, space life sciences research in China is characterized by a tendency toward integration of scientific and engineering resources in preparing and implementing advanced space programs. In the field of operational medicine, we carried out an international cooperated Head-Down Bed Rest (HDBR) experiment and investigated the effects of Chinese herbs compounds on astronaut's physiological functions. The effect of microgravity and its mechanisms were further studied from the level of physiology and biology. At the same time, state-level platform for ground and space experiment was established.      

Ground-based Investigations of Atomic Oxygen Erosion Behaviors of Silver and Ion-implanted Silver

Silver foils and ion-implanted silver foils exposed to atomic oxygen （AO） generated in a ground simulation facility were investigated by the quartz crystal microbalance （QCM）, the scanning electron microscopy （SEM） and the X-ray photoelectron spectroscopy （XPS）. The experimental results show the presence of Ag2O and AgO in an oxidation process of the silver foil having exposure to AO. As soon as silver comes under the bombardment of atomic oxygen, the oxidation process starts with a thick film forming on the silver surface. Because of the development of stresses, the oxide layer gets cracked and spalled, which leads to appearance of a new silver surface intensifying further oxidation. At last, AgO begins to form on the outer surface of the oxide film. The analytical results of the XPS and the AES attest to formation of a continuous high-quality protective oxide-based layer on the surface of ion-implanted silver films after exposure to AO. This layer can well protect materials in question from erosion.     

基于统计特征的稳健的飞机识别

给出了一种用于稳健的高距离分辨率（HRR）雷达飞机识别（ID）的基于统计特征（StaF)的分类器，HRR波形峰特征在飞行中选择，没有对特征的数目与位置作出先验假设。所抽取的特征取决于所观测的波形（使特征的数目、位置与幅度为随机变量）的信息内涵，这项研究的主要目的是通过保持对已知目标的高识别率同时又使未知目标错误最小来提高分类的稳健性。文中给出了识别结果，表明这种统计特征（StaF)分类器可以显著地降低与未知目标相关的误差，同时保持很高的正确分类概率。     

航天器机构固体润滑球轴承磨损失效模型

根据赫兹接触理论和运动学基本原理,推导了固体润滑球轴承的接触应力和滑动速度公式。基于“航天器机构固体润滑球轴承的失效主要取决于固体润滑膜磨损”的分析结论,建立了固体润滑球轴承的磨损失效模型,并用已有的试验数据进行了初步验证。     

Tensile properties analysis of CFRP-titanium plate multi-bolt hybrid joints

Hybrid joints have better tensile properties than pure bonded and bolted bolts, and are increasingly used in the aerospace field. Tensile tests are carried out for the Hybrid Bonded/Bolted(HBB) joints of Carbon Fiber Reinforced Polymer(CFRP) laminate and titanium alloy plate under different bolt numbers, and the corresponding load–displacement curves are obtained. At the same time, based on Continuum Damage Mechanics(CDM) theory, which is derived from 3D Hashin failure criteria, and a Cohesive Z...     

Fracture Behavior of TiNi Based Shape Memory Alloy Cold-rolled Tube

The microstructures and interracial characteristics of matrices at the inwalls and the out-walls of the cold-rolled tube with different amounts of deformation were investigated by the scanning electronic microscope （SEM）, the optical microscope （OM）, and the transmission electronic microscope （TEM） techniques. It was observed that as the amount of deformation increases, the flaws nucleate at the out-walls of the cold rolled tube, the stress-induced martensites change from （111 ） type Ⅰ twins to （011） type Ⅱ twins and then to （100） compound twins, nanocrystals and bulk amorphisation happen, the high density dislocation causes stress concentration at the out-walls of the Ti50Ni50 cold-rolled tube, and then precipitates its fracture, and the Ti2Ni particles strengthen the grain boundaries and curb the dislocation movements during plastic deformation. The inhomogeneity level of the grains in the Ti50Ni50 alloy plays an important role on the fracture of the Ti50Ni50 cold rolled tube.