W波段FMCW SAR系统实现与试验

与C波段、X波段和Ka波段相比,W波段的调频连续波(FMCW)合成孔径雷达(SAR)系统因具有更高的分辨率,更易实现低功耗与小型化而备受关注。W波段波长短,因此该波段的FMCW SAR更适用于短距离成像。提出一种W波段FMCW SAR系统的设计方案,根据提出的系统方案与指标,实现W波段FMCW轨道SAR系统的样机研制。该系统分辨率可达5 cm。系统样机试验在上海交通大学的多功能船模拖拽水池完成。设置不同目标进行成像试验,最终得到多组有效试验数据,并基于改进的RD算法进行数据处理,得到理想的SAR图像。经分析可知,系统实际分辨率优于5 cm。试验结果证明了W波段FMCW SAR系统的可行性与有效性。     

LM-11SL:A Sea-Launched Carrier Rocket for Small Satellites and Its Launch Service

Following the successful maiden flight of the Long March 11(LM-11) launch vehicle from the Jiuquan Satellite Launch Center in September 2015, the first sea-launched carrier rocket dedicated to provide a launch service for small satellites and their constellations, the Long March 11 Sea Launch(LM-11 SL) has been under development by the China Academy of Launch Vehicle Technology(CALT) and the China Great Wall Industry Corporation(CGWIC). It is planned to commence launch service in 2018. Based on the LM-11, a land-launched four-staged solid launch vehicle which has entered the market and accomplished launch missions for several small satellites in the past 3 years, the newly adopted sea launch technology enables transport and launch of LM-11 SL from maritime ships, providing flexible launch location selection.After inheriting the mature launch vehicle technologies from previous members of the Long March launch vehicle family and adopting a new way of launching from the sea, the LM-11 SL is capable of sending payloads into low Earth orbits with all altitudes and inclinations, from 200 km to 1000 km, from equatorial to sun synchronous, within a shortduration launch campaign. The LM-11 SL provides a flexible, reliable and economical launch service for the global small satellite industry.     

复合材料人形杆压扁过程数值模拟分析

为了避免超弹性杆因应力集中而产生疲劳裂纹,延长其使用寿命,借助于ABAQUS软件,采用S4R壳单元和粘结单元,建立了人形杆复合材料压扁有限元模型。利用显示动力学法对人形杆压扁过程进行了非线性数值模拟分析,分析单一材料、两种材料铺层方式和不同铺层角度时人形杆各层应力特点,进而选取出应力最小的铺层方法。该研究对可展开机构中人形截面超弹性杆复合材料最佳铺层方式的合理选取具有重要意义。     

滑行段低温推进剂流动及换热特性对气枕压力的影响研究

运载火箭在飞行过程中需要进行姿态调整以满足入轨要求,贮箱内推进剂在外界干扰力的作用下将发生晃动,由此引入了诸如气液接触面积、蒸发、冷凝过程及推进剂流动变化等不确定影响因素。实际飞行过程尤其是进入滑行段的初始推进剂晃动对贮箱内气枕压力及推进剂流动行为具有重要影响。在调研国内外运载火箭末级飞行过程中低温贮箱压力及推进剂流动特性的基础上,建立仿真模型,采用流体体积函数方法(VOF)分析滑行段推进剂流动特性变化对贮箱气枕压力的影响。     

超临界自然层流机翼设计及基于TSP技术的边界层转捩风洞试验

为了实现绿色航空节能减排的目标,层流设计技术成为飞行器设计者的研究热点。对于跨声速客机而言,超临界自然层流机翼设计技术将显著减小飞行阻力,提升气动性能,减少燃油消耗和污染物排放。首先,基于高精度边界层转捩预测技术耦合翼型优化设计系统,实现超临界自然层流翼型设计;经过合理的翼型配置,形成超临界自然层流机翼。转捩数值模拟分析结果表明,超临界自然层流机翼的层流流动特性良好。然后,以比例为1：10.4的试验模型在荷兰高速低湍流度风洞进行边界层转捩风洞试验,使用温度敏感材料涂层（TSP）技术拍照获得机翼表面在不同马赫数、雷诺数和迎角工况下的层流-湍流分布。最后,通过超临界自然层流机翼边界层转捩试验结果,探讨了该类型机翼的转捩特性随来流参数的变化规律,总结了超临界自然层流机翼设计的关键因素。此外,该模型也可用来验证边界层转捩预测技术在超临界、高雷诺数工况下的预测精度。     

贫预混燃烧室化学反应器网络模型建模及不确定性分析

基于CFD三维数值模拟结果的化学反应器(CRN)网络模型方法具有快速预估燃烧室NOx排放的特点。研究通过CFD数值模拟手段获得了贫预混燃烧室流场、温度场等特征分布,基于燃料空气掺混特性、速度场、温度场、OH分布以及达姆科勒数,燃烧室被离散划分为预热区、火焰锋面区、火焰过渡区、后火焰区、中心回流区以及角回流区,建立了复杂的CRN模型表征燃烧室内部的流动特征和火焰结构。以贫预混燃烧器为对象,与实验结果进行了对比验证。通过敏感性和不确定性分析获得了反应区域停留时间和烟气回流比例等关键参数对NOx排放的影响规律。结果表明:CFD-CRN混合方法更适用于在高当量比条件下贫预混燃烧室NOx排放的快速有效预测。在相同扰动强度的条件下,反应预热区域和火焰锋面区域的停留时间扰动对CRN模型预测NOx的生成量和稳定性影响更显著。CFD-CRN混合方法应明确在较高的绝热火焰温度条件下烟气回流比的准确性计算及其对NOx生成的显著影响。      

基于高功率因数控制的永磁同步电机无电解电容驱动系统控制策略

永磁同步电机无电解电容驱动系统因其成本与寿命的优势,在白色家电领域逐步得到广泛的应用。然而,由于使用小容量的薄膜电容取代大容量的电解电容,母线电压会以两倍工频波动,在母线电压处于波谷时,逆变器输出电压容易饱和,导致控制性能恶化,网侧电流畸变。因此,提出了一种基于高功率因数控制的转矩控制环和电压矢量修正策略,能够有效提升网侧功率因数,抑制网侧电流谐波并符合IEC 6100032标准。该算法的有效性通过仿真得以验证。     

永磁同步电机无位置估计误差的滑模观测器无速度传感器控制方法

传统滑模观测器(SMO)无速度传感器控制方法在电机的运行速度出现较大变化时,对位置的估计会出现稳态误差。为了消除位置的估计误差,提出了一种带有反动电势修正的SMO无速度传感器控制方法。反电动势的修正律基于永磁同步电机(PMSM)的dq轴电流模型。即使电机运行在速度大幅波动的情况下,也能保持位置估计误差为零,且该方法计算增量较小,易于实现。将所提出的方法在1台1.5 kW的PMSM上进行了仿真和试验,结果验证了位置估计误差能有效地收敛至零。     

Aircraft engine fault detection based on grouped convolutional denoising autoencoders

Many existing aircraft engine fault detection methods are highly dependent on performance deviation data that are provided by the original equipment manufacturer. To improve the independent engine fault detection ability, Aircraft Communications Addressing and Reporting System (ACARS) data can be used. However, owing to the characteristics of high dimension, complex correlations between parameters, and large noise content, it is difficult for existing methods to detect faults effectively by using ACARS data. To solve this problem, a novel engine fault detection method based on original ACARS data is proposed. First, inspired by computer vision methods, all variables were divided into separated groups according to their correlations. Then, an improved convolutional denoising autoencoder was used to extract the features of each group. Finally, all of the extracted features were fused to form feature vectors. Thereby, fault samples could be identified based on these feature vectors. Experiments were conducted to validate the effectiveness and efficiency of our method and other competing methods by considering real ACARS data as the data source. The results reveal the good performance of our method with regard to comprehensive fault detection and robustness. Additionally, the computational and time costs of our method are shown to be relatively low.     

State of art on energy management strategy for hybrid-powered unmanned aerial vehicle

New energy sources such as solar energy and hydrogen energy have been applied to the Unmanned Aerial Vehicle(UAV), which could be formed as the hybrid power sources due to the requirement of miniaturization, lightweight, and environmental protection issue for UAV. Hybrid electrical propulsion technology has been used in UAV and it further enforces this trend for the evolution to the Hybrid-Powered System(HPS). In order to realize long endurance flight mission and improve the energy efficiency of UAV, many researching works are focused on the Energy Management Strategy(EMS) of the HPS with digital simulation, ground demonstration platforms and a few flight tests for the UAV in recent years. energy management strategy, in which off-line or on-line control algorithms acted as the core part, could optimize dynamic electrical power distribution further and directly affect the efficiency and fuel economy of hybrid-powered system onboard.In order to give the guideline for this emerging technology for UAV, this paper presents a review of the topic highlighting energy optimal management strategies of UAV. The characteristics of typical new energy sources applied in UAV are summarized firstly, and then the classification and analysis of the architecture for hybrid power systems in UAV are presented. In the context of new energy sources and configuration of energy system, a comprehensive comparison and analysis for the state of art of EMS are presented, and the various levels of complexity and accuracy of EMS are considered in terms of real time, computational burden and optimization performance based on the optimal control and operational modes of UAV. Finally, the tendency and challenges of energy management strategy applied to the UAV have been forecasted.