Modeling of “gradual” solar energeticparticle events using a stochastic differential equation method

We have modeled “gradual” solar energetic particle events through numerical simulations using a StochasticDifferential Equation (SDE) method. We consider that energetic particle events are roughly divided into two groups: (1) where the shock was driven by coronal mass ejections (CMEs) associated with large solar flares, and (2) where they have no related solar events apart from the CMEs. (The detailed classification of energetic particle events was discussed in our previous paper.) What we call “gradual” solar energetic particle events belong to the former group. Particles with energies greater than 10 MeV are observed within several hours after the occurrence of flares and CMEs in many gradual events. By applying the SDE method coupled with particle splitting to diffusive acceleration, we found that an injection of high energy particles is necessary for early enhancement of such a high-energy proton flux and that it should not be presumed that the solar wind particles act as the seed population.     

Solar physics and interferometry mission (SPI)

This paper presents the scientific objectives of the Solar Physics and Interferometry Mission (SPI), describes succinctly the model payload and summarizes mission's issues. Novel instrumentation (interferometry) and clever mission design (small platform on low orbit with high telemetry and dedicated smaller platform on hexapod for permanently Sun-centered instruments) allow both spectral imaging and Helioseismology at very high spatial and temporal resolutions. Although not retained by ESA, this mission could become reality through NASA MIDEX and/or CNES PROTEUS opportunities as soon as 2007–2008.     

Estimation of sea surface temperature, wind speed and water vapor with microwave radiometer data based on simulated annealing

A method for estimation of sea surface temperature, ocean wind speed and water vapor with microwave radiometer data based on simulated annealing is proposed. The proposed method shows about 60% improvement of sea surface temperature estimation accuracy in comparison to the existing method using Newton’s iterative algorithm.     

A first step towards proton flux forecasting

We present a preliminary version of a potential tool for real time proton flux prediction which provides proton flux profiles and cumulative fluence profiles at 0.5 and 2 MeV of solar energetic particle events, from their onset up to the arrival of the interplanetary shock at the spacecraft position (located at 1 or 0.4 AU). Based on the proton transportation model by Lario et al. [Lario, D., Sanahuja, B., Heras, A.M. Energetic particle events: efficiency of interplanetary shocks as 50 keV E < 100 MeV proton accelerators. Astrophys. J. 509, 415–434, 1998] and the magnetohydrodynamic shock propagation model of Wu et al. [Wu, S.T., Dryer, M., Han, S.M. Non-planar MHD model for solar flare-generated disturbances in the Heliospheric equatorial plane. Sol. Phys. 84, 395–418, 1983], we have generated a database containing “synthetic” profiles of the proton fluxes and cumulative fluences of 384 solar energetic particle events. We are currently validating the applicability of this code for space weather forecasting by comparing the resulting “synthetic” flux profiles with those of several real events.     

Collisionless reconnection in the magnetotail

Recent developments regarding collisionless reconnection in current sheets with a finite normal magnetic field component (B_z) are reviewed. In 2-D x, z configurations the ion tearing mode is stabilized by the electron compressibility. When the y dependence is included, cross-field current instabilities can be excited. Of these, the drift kink mode appears to be particularly important. 3-D electromagnetic particle simulations indicate that this mode can act as the precursor to the growth of tearing modes and subsequent reconnection.     

Some comparisons of orbit determination and parameter estimation based on LAGEOS 1 and LAGEOS 2 data

The modelling accuracy of the LAGEOS 1 orbit was continously improved since its launch in 1976. In spite of these experiences the modelling accuracy of LAGEOS 2 is still about 20 per cent worse. Considering e. g. only the influence of different gravity field models it has been shown that the orbital fits for arc lengths of one month is generally about 25 mm for LAGEOS 1 and more than 30 mm for LAGEOS 2. This is mainly due to the fact that LAGEOS 2 has not yet been used for the determination of most gravity field models. The influences of different model parameters on the estimation of station coordinates, Earth rotation parameters, the geogravitational coefficient, the radiation pressure coefficient, and the empirical acceleration has been studied. The differences and peculiarities of both satellites are discussed. Although the analysis of LAGEOS 2 data still does not reach the high level of LAGEOS 1 combination solutions using both satellites allow new insights, higher accuracies, and a higher time resolution for the parameters and phenomena investigated.     

Metabolic changes in rats subjected to space flight for 18.5 days in the biosatellite Cosmos 936

From an investigation of the activity of six glucocorticoid dependent liver enzymes, the existence of chronic, transient, stress-induced hypercorticosteronaemia during flight is probable. This hypercorticosteronaemia arises from weightlessness and induces gluconeogenesis. Weightlessness also caused substantial increases in liver glycogen level. The increased lipolytic activity and that of lipoprotein lipase in several groups of animals could be interpreted as enhancement of fat mobilization and utilization under the influence of stress. As this latter enhancement was also found in ground-based controls, it may have been due to the stress of handling rather than to space flight per se.     

Changes in vacuolation in the root apex cells of soybean seedlings in microgravity.

Changes in the vacuolation in root apex cells of soybean (Glycine max L. [Merr.]) seedlings grown in microgravity were investigated. Spaceflight and ground control seedlings were grown in the absence or presence of KMnO4 (to remove ethylene) for 6 days. After landing, in order to study of cell ultrastructure and subcellular free calcium ion distribution, seedling root apices were fixed in 2.5% (w/v) glutaraldehyde in 0.1 M cacodylate buffer and 2% (w/v) glutaraldehyde, 2.5% (w/v) formaldehyde, 2% (w/v) potassium antimonate K[Sb(OH)6] in 0.1 M K2HPO4 buffer with an osmolarity (calculated theoretically) of 0.45 and 1.26 osmol. The concentrations of ethylene in all spaceflight canisters were significantly higher than in the ground control canisters. Seedling growth was reduced in the spaceflight-exposed plants. Additionally, the spaceflight-exposed plants exhibited progressive vacuolation in the root apex cells, particularly in the columella cells, to a greater degree than the ground controls. Plasmolysis was observed in columella cells of spaceflight roots fixed in solutions with relatively high osmolarity (1.26 osmol). The appearance of plasmolysis permitted the evaluation of the water status of cells. The water potential of the spaceflight cells was higher than the surrounding fixative solution. A decrease in osmotic potential and/or an increase in turgor potential may have induced increases in cell water potential. However, the plasmolysed (i.e. non-turgid) cells implied that increases in water potential were accompanied with a decrease in osmotic potential. In such cells changes in vacuolation may have been involved to maintain turgor pressure or may have been a result of intensification of other vacuolar functions like digestion and storage.     

Biosphere 2 Test Module: a ground-based sunlight-driven prototype of a closed ecological life support system.

Constructed in 1986, the Biosphere 2 Test Module has been used since the end of that year for closed ecological systems experiments. It is the largest closed ecological facility ever built, with a sealed variable volume of some 480 cubic meters. It is built with a skin of steel spaceframes with double-laminated glass panels admitting about 65 percent Photosynthetically Active Radiation (PAR). The floor is of welded steel and there is an underground atmospheric connection via an air duct to a variable volume chamber ("lung") permitting expansion and contraction of the Test Module's air volume caused by changes in temperature and barometric pressure, which causes a slight positive pressure from inside the closed system to the outside thereby insuring that the very small leakage rate is outward. Several series of closed ecological system investigations have been carried out in this facility. One series of experiments investigated the dynamics of higher plants and associated soils with the atmosphere under varying light and temperature conditions. Another series of experiments included one human in the closed system for three, five and twenty-one days. During these experiments the Test Module had subsystems which completely recycled its water and atmosphere; all the human dietary needs were produced within the facility, and all wastes were recycled using a marsh plant/microbe system. Other experiments have examined the capability of individual component systems used, such as the soil bed reactors, to eliminate experimentally introduced trace gases. Analytic systems developed for these experiments include continuous monitors of eleven atmospheric gases in addition to the complete gas chromatography mass spectrometry (GCMS) examinations of potable, waste system and irrigation water quality.     

Optical design and testing of a fast,large aperture,infrared space telescope

An optical design study for a next generation infrared space telescope has been performed. The concept is that of a passively cooled telescope of minium aperture 2.5 metre with an F/1.2 primary and wavelength coverage from = 2 to at least 40 m, and possibly to 100 m. Compactness, low thermal emission from the optics and structure, diffraction limited imaging at = 2 m, and sensitivity to misalignment aberrations and manufacturing errors were the main considerations for this study. Ray tracing results are presented showing the characteristics of the various designs considered. A preliminary investigation of stray light properties is also given. Special emphasis has been placed on the testing of such a fast primary, and optical systems using a lateral shearing interferometer are described for testing both the primary and the primary/secondary combination.