复杂薄壁、薄板类零件高速加工技术初探

从加工方法,加工参数,工装夹具等方面对薄壁、薄板类零件的加工进行深入探讨,有效地解决了薄壁、薄板类零件的加工,为今后进行此类零件的加工进行了有益的技术储备。     

中国航空质量组织(CAQG)第一届第二次会议召开

2013年8月26日,CAQG第一届第二次会议在天津召开。来自中航工业集团公司,中国商飞,天津波音复材公司等40多家单位的60多名质量工作者参加了会议。会议由天津波音复材公司承办,CAQG秘书处单位中航工业综合技术研究所协办。会议目的是回顾CAQG工作进展,商讨下一步工作安排。     

Ameco再添航线维修新客户

2012年10月27日,马尔代夫美佳航空公司一架波音767飞机降落在首都机场,Ameco将为其提供每周2班的航线维护及放行服务,这也是Ameco在北京迎来的又一新客户。至此,Ameco在北京为30家国际客户执行航线维护放行服务。此外,基于与Ameco多年的良好合作,今年全日空、达美、波兰等航     

传感器现场校准测试系统电气系统设计与实现

传感器现场校准测试系统用于对运载火箭装配的脉冲频率输出式压力传感器的静态性能、压力开关及磁敏行程开关传感器的静态和动态性能进行测试,此测试系统解决装箭状态下压力开关响应时间测试问题。电气系统基于RS-232串口通信上、下位机模式。下位机软件功能模块间接口清晰,提高了软件的可扩展性、可移植性和可维护性,且源代码易于理解。     

压力管道流固耦合振动特性分析

压力管道系统中存在流体和结构之间的耦合振动。因此,在研究压力管道的动态特性时,应考虑管内流体对管道结构动态特性的影响。本文以某动力系统空间管路为研究对象,采用Galerkin法对导管-流体组成的耦合系统进行有限元离散,建立耦合系统控制方程。在此基础上,用考虑初应力刚度的有限元法,对导管充压前、后的振动特性进行了数值计算,详细分析了流固耦合作用对导管结构振动特性的影响,并与试验结果进行了比较分析。结果表明,流固耦合作用对导管模态振型的影响很小,但对导管各阶固有频率有不同程度的影响。     

Operating characteristics of a high radius pre-swirl cooling system

An experimental investigation into pre-swirl effectiveness and receiver hole discharge coefficient characteristics for a high radius injection pre-swirl cooling systems was carried out on a physically representative experimental rig with a 450 mm diameter rotor.The receiver holes and pre-swirl nozzle were located at a radius of 181 mm and 180 mm respectively.The experimental work was mainly conducted at 5 000～12 000 r/min,4 bar absolute pressure and 1.132 kg/s air supply.The maximum air supply temperature was 190 ℃.Pressure and temperature distributions in the pre-swirl system were examined with an emphasis on the velocity effectiveness of the pre-swirl system as a whole and on the discharge coefficients of the rotating 'receiver holes' in the rotor.The results showed that the velocity effectiveness increased with increasing swirl ratio resulting in reduced blade cooling flow temperature.Different seal flow configurations caused very different effectiveness at different speeds,but outflow through the inner and outer seals always gave the highest effectiveness compared other configurations.Increasing the seal flow rate reduced the effectiveness.For the coefficient of discharge,except for the low speed range,it increased with increase in swirl ratio for most speeds.      

The role of AVDR in linear cascade testing

Linear cascade testing plays an important role in the research and development of turbomachinery and is widely used over the world.The ideal cascade model of a turbomachinery blade row is two-dimensional.In actual linear cascade testing, the flow through the test section converges due to the development of the boundary layer and secondary flow along the sidewall surfaces of the test section.Axial velocity density ratio(AVDR) is adopted to account for the deviation of the tested cascade flow from the ideal 2D model.Among numerous published cascade works, the influence of AVDR on cascade performance is seen to be complicated with many affecting factors, such as those related to cascade/blade geometry and flow conditions.Also, controlling AVDR is limited by the facility capability.Furthermore, real blade-to-blade flow in turbomachines is usually associated with AVDR greater than unity due to limited span of blades between the hub and shroud such that cascade testing without reducing AVDR could be favored sometimes.All these facets add complexity and diversification to the matter.The current paper reviews previous studies and results on AVDR.Consolidated understanding on the role of AVDR and recommendations on how to deal with it in linear cascade testing are provided.      

China's Space Activities In 2007

THE FOURTH BEIDOU NAVIGATION EXPERIMENTAL SATELLITE LAUNCHED The fourth Beidou experimental navigation satellite was launched into snace aton a LM-3A launch vehicle at Xichang Satellite Launch Center on February 3 at 00:28(Beijing Time).24 minutes later,the satellite separated from the launch vehicle and     

Debut Flight Of LM-3C:Launching Tianlian-1 Successfully

FY-3A,the first satellite of China's new generation of polar-orbiting meteorological satellites,was launched into space atop a modified LM-4C launch vehicle.The satellite separated from the rocket 19 minutes after the takeoff.Flying at an altitude of 807km with an inclination of 98.8 degrees,the satellite circles in polar orbit 14 times everyday,covering the whole globe twice a day. FY-3A has a design lifetime of three years.Weighing 2295kg,the three-axis stabilized satellite is equipped with 11 remote s...     

贵阳区域扇区优化方案

引言 贵州经济的腾飞带动了贵阳交通和旅游事业的发展,同时,贵阳本场的航班、贵州周边地区航班及贵阳区域的两条国际航路上（A581和B330）的国际航班数量也在大幅增加,这些因素使得贵阳区域的过境航班量迅速增长。从2003年的日均300多架次增加到现在的日均近500架次。目前贵州管制区分为东西两个扇区,在很多时间段内已经超出了管制员能够指挥的架次数,