Monitoring power supply current and using a neural network routineto diagnose circuit faults

As a circuit is tested, the current drawn from a power supply can vary as different functions are invoked by the test. The current draw can be plotted against time, showing a characteristic trace for the test performed. Sensors in the ATS power supply can be used to monitor the current flow during test execution. Defective components can be classified using a Neural Network according to the pattern of variation from the “trace” of a good card. This can be performed as a background function, with the network gaining in accuracy over time. This paper discusses the Neural Network Routine for diagnosing circuit faults using monitored power supply current     

Solid-state integrating detectors as an indicator of biological doses from HZE particles.

For interpretation of results obtained in future biological experiments in the International Space Station (ISS), biologically equivalent doses have to be determined using small-scale detectors without disturbing the surrounding radiation field. The detectors should be lightweight, stable, safe, and simple in handling. Solid-state integrating detectors (SSID) can satisfy these requirements. This paper demonstrates that combination of SSID such as thermoluminescence dosimeters and radiophotoluminescence glasses can be practically used for the evaluation of biologically equivalent doses. Statistical errors (type-A uncertainty) of this method will be satisfactorily small relative to those generally observed in biological responses. Permissible levels of systematic errors (type-B uncertainty) depend on dosimetry purposes (most-probable or conventional) and variability of biological responses.     

Periods of quasi-stationary conditions in interplanetary space according to sequences of SEP events

The values of the characteristic decay time of particle fluxes in SEP events vary, as a rule, considerably from event to event. We point out, however, that at times sequences of events having similar decay times were observed over long time intervals (up to one month, and even longer in a few cases). The values of the decay times, however, differed among different sequences. The constancy of the decay phase in each consecutive event of these series suggests that the interplanetary medium was in steady state during the event series, and, because of solar rotation, its uniformity within sectors extended to 90–180° in heliolongitude. The very rarely observed long series (up to 2–3 solar rotations) indicate the steadiness and homogeneity of the plasma and the interplanetary magnetic field (IMF) in the entire inner solar system in the course of this time span. It is pointed out that the neutral current sheet of the IMF does not represent a substantial obstacle for energetic charged particles. Both hemispheres are (above and below the current sheet), at least during the series of solar events, invariant with time, uniform and alike from the viewpoint of the propagation of charged particles. The investigation of such sequences of events can also be useful for forecasting characteristics of SEP events.     

Coupled Clouds and Chemistry of the Giant Planets— A Case for Multiprobes

In seeking to understand the formation of the giant planets and the origin of their atmospheres, the heavy element abundance in well-mixed atmosphere is key. However, clouds come in the way. Thus, composition and condensation are intimately intertwined with the mystery of planetary formation and atmospheric origin. Clouds also provide important clues to dynamical processes in the atmosphere. In this chapter we discuss the thermochemical processes that determine the composition, structure, and characteristics of the Jovian clouds. We also discuss the significance of clouds in the big picture of the formation of giant planets and their atmospheres. We recommend multiprobes at all four giant planets in order to break new ground.     

Ultra triple-junction high-efficiency solar cells

Solar cells suitable for the space environment must combine high-efficiency, high energy density, and radiation hardness in a manufacturable design. As improvement in one performance parameter usually results in degradation in one or more of the remaining parameters, careful optimization is required to enhance overall performance. The ultra triple-junction cell developed builds upon the established success of the fully qualified improved triple-junction cell currently in production. In the ultra triple-junction cell configuration, improved robustness and efficiency after radiation exposure augment a cell design expected to deliver 28% beginning-of-life efficiency in production.     

Recycling of inorganic nutrients for hydroponic crop production following incineration of inedible biomass.

The goal of resource recovery in a regenerative life support system is maintenance of product quality to sure support of reliable and predictable levels of life support function performance by the crop plant component. Further, these systems must be maintained over extended periods of time, requiring maintenance of nutrient solutions to avoid toxicity and deficiencies. The focus of this study was to determine the suitability of the ash product following incineration of inedible biomass as a source of inorganic nutrients for hydroponic crop production. Inedible wheat biomass was incinerated and ash quality characterized. The incinerator ash was dissolved in adequate nitric acid to establish a consistent nitrogen concentration is all nutrient solution treatments. Four experimental nutrient treatments were included: control, ash only, ash supplemented to match the control treatment, and ash only quality formulated with reagent grade chemicals. When nutrient solutions were formulated using only ash following incineration of inedible biomass, a balance in solution is established representing elemental retention following incineration and nutrient proportions present in the original biomass. The resulting solution is not identical to the control. This imbalance resulted in a suppression of crop growth. When the ash is supplemented with reagent grade chemicals to establish the same balance as in the control--growth is identical to the control. The ash appears to carry no phytotoxic materials. Growth in solution formulated with reagent grade chemicals but matching the quality of the ash only treatment resulted in similar growth to that of the ash only treatment. The ash product resulting from incineration of inedible biomass appears to be a suitable form for recycle of inorganic nutrients to crop production.     

Conditions of the Maximum Principle in the Problem of Optimal Control over an Aggregate of Dynamic Systems and Their Application to Solution of the Problems of Optimal Control of Spacecraft Motion

The necessary first-order conditions of strong local optimality (conditions of maximum principle) are considered for the problems of optimal control over a set of dynamic systems. To derive them a method is suggested based on the Lagrange principle of removing constraints in the problems on a conditional extremum in a functional space. An algorithm of conversion from the problem of optimal control of an aggregate of dynamic systems to a multipoint boundary value problem is suggested for a set of systems of ordinary differential equations with the complete set of conditions necessary for its solution. An example of application of the methods and algorithm proposed is considered: the solution of the problem of constructing the trajectories of a spacecraft flight at a constant altitude above a preset area (or above a preset point) of a planet's surface in a vacuum (for a planet with atmosphere beyond the atmosphere). The spacecraft is launched from a certain circular orbit of a planet's satellite. This orbit is to be determined (optimized). Then the satellite is injected to the desired trajectory segment (or desired point) of a flyby above the planet's surface at a specified altitude. After the flyby the satellite is returned to the initial circular orbit. A method is proposed of correct accounting for constraints imposed on overload (mixed restrictions of inequality type) and on the distance from the planet center: extended (nonpointlike) intermediate (phase) restrictions of the equality type.     

GNSS receiver for GLONASS signal reception

This paper deals with the latest version of Experimental GNSS receiver built at the Czech Technical University and describes integration of GLONASS signal processing to the receiver. The new FPGA platform Virtex-D Pro by Xilinx is used and enables integration of whole digital signal processing of GNSS receiver into the single chip. The RE unit of the receiver is capable of processing all GLONASS frequency of the Li and L2 bands in two independent RE channels; each channel can process one band. The frequency selection of the appropriate satellite is accomplished in a digital correlator. The development flow of the GLONASS correlator is discussed herein. The complexity of the GLONASS correlator with complexity of GPS correlator is compared. The developed GLONASS correlator was tested in Simuelink tool during development. The next test was carried out using GLONASS simulator and real GLONASS satellite signal.