Experimental investigations of the 10 N catalytic hydrazine thruster

Experimental investigations of the 10 N catalytic hydrazine thruster are reported. These thrusters find applications in orbit raising functions of a spacecraft. The hardware was realized and tested in a vacuum chamber (10^?3 mbar vacuum) for its performance. When tested at the design propellant supply pressure of 21.5 bar the thruster developed 10.25 N thrust at an operating chamber pressure of 16.4 bar. The thruster was also tested for off-design conditions (24, 18 and 14.5 bar propellant supply pressures) of operation to determine the steady-state performance. The chamber pressure and vacuum thrust follow more or less a linear law with the propellant-supply pressure. The thruster was also tested for its response characteristics for short (100 ms) firing durations at various propellant-supply pressures (15.5, 18.8, 22.5, 25.6 and 29.5 bar) and the experimental results are reported and discussed. The hydrazine was injected at the room temperature (300^±5 K).     

A sample collector for robotic sample return missions III: Impact survivability studies

Laboratory impact tests have been performed on experimental versions of a proposed robotic sample collector for extraterrestrial samples. The collector consists of a retractable aluminum ring containing an impregnable silicone compound that is pressed into the surface of the body to be sampled. As part of a comprehensive program to evaluate this idea, we have performed tests to determine if the samples embedded in the collector medium can survive the impact forces experienced during direct reentry, such as that of the recent Genesis sample return mission. For the present study, samples of sand, rock, glass, and chalk were subjected to decelerations of 1440–2880 g using drop tests. We found that even the most fragile samples, chosen to be representative of a wide range of the types of materials found on the surface of asteroids that have currently been studied, can withstand impacts of the intensity experienced by a sample return capsule during direct reentry.     

Distribution and variability of accelerated electrons at Mars

We investigate accelerated electrons observed by Mars Global Surveyor (MGS), using data from the Electron Reflectometer (ER) instrument. We find three different types of accelerated electron events. Current sheet events occur over regions with weak or no crustal fields, have the highest electron energy fluxes, and are likely located on draped magnetotail fields. Extended events occur over regions with moderate crustal magnetic fields, and are most often observed on closed magnetic field lines. Localized events have the lowest energy fluxes, occur in strong magnetic cusp regions, and are the most likely kind of event to be found on open magnetic field lines. Some localized events have clear signatures of field-aligned currents; these events have much higher electron fluxes, and are preferentially observed on radially oriented open magnetic field lines. Electron acceleration events, especially localized events, are similar in many ways to events observed in the terrestrial auroral zone. However, physical processes related to those found in the terrestrial cusp and/or plasmasheet could also be responsible for accelerating electrons at Mars.     

RF communications subsystem for the Radiation Belt Storm Probes mission

The NASA Radiation Belt Storm Probes (RBSP) mission, currently in Phase B, is a two-spacecraft, Earth-orbiting mission, which will launch in 2012. The spacecraft's S-band radio frequency (RF) telecommunications subsystem has three primary functions: provide spacecraft command capability, provide spacecraft telemetry and science data return, and provide accurate Doppler data for navigation. The primary communications link to the ground is via the Johns Hopkins University Applied Physics Laboratory's (JHU/APL) 18 m dish, with secondary links to the NASA 13 m Ground Network and the Tracking and Data Relay Spacecraft System (TDRSS) in single-access mode. The on-board RF subsystem features the APL-built coherent transceiver and in-house builds of a solid-state power amplifier and conical bifilar helix broad-beam antennas. The coherent transceiver provides coherency digitally, and controls the downlink data rate and encoding within its field-programmable gate array (FPGA). The transceiver also provides a critical command decoder (CCD) function, which is used to protect against box-level upsets in the C&DH subsystem. Because RBSP is a spin-stabilized mission, the antennas must be symmetric about the spin axis. Two broad-beam antennas point along both ends of the spin axis, providing communication coverage from boresight to 70°. An RF splitter excites both antennas; therefore, the mission is designed such that no communications are required close to 90° from the spin axis due to the interferometer effect from the two antennas. To maximize the total downlink volume from the spacecraft, the CCSDS File Delivery Protocol (CFDP) has been baselined for the RBSP mission. During real-time ground contacts with the APL ground station, downlinked files are checked for errors. Handshaking between flight and ground CFDP software results in requests to retransmit only the file fragments lost due to dropouts. This allows minimization of RF link margins, thereby maximizing data rate and thus data volume.     

Active aeroelastic control over a four control surface wing model

This paper describes the procedure implemented to design, develop and test an aeroelastic control system installed on a forward swept wing of the aeroelastic demonstrator X-DIA. A control method directly based on Nissim aerodynamic energy concept has been chosen. Two different modeling techniques have been adopted for the calculation of generalized aerodynamic forces, such as doublet lattice method and computational fluid dynamics and the obtained results are finally compared. The latter approach, applied to better estimate the control surfaces effectiveness, requires the capability to correctly model the control surface rotation and the grid deformation, usually addressed as non-trivial problems in CFD based aeroelastic analysis. A genetic algorithm optimization technique has been adopted to state and refine all the control gains.     

Experimental studies of the impulsive ultrasonic machining by a tool with an intermediate striker

Some experimental data on the process of impulsive ultrasonic machining are presented. Also given are the data on variations in the impulsive vibration frequency of a workpiece and a tool.     

Turbulence in the region 80–120 km

Measurements of turbulent energy dissipation rates and eddy diffusion coefficients have been collated, and mean height profiles of fundamental turbulence parameters in the region 80–120 km are presented.     

Systems integration, user interface design, and tower air trafficcontrol

Tower air traffic control is currently performed using several unintegrated systems. While each of these systems supports performing an isolated task, the compilation of tools presents a number of challenges. This paper reports ways in which the Tower Control Computer Complex (TCCC) will support and enhance user management of numerous systems. Areas that will be notably improved include the consistency in the user interface of the air traffic control toolset, the task of manually integrating tools and information, toolset alert management, and toolset organization and administration     

Trapped antiprotons produced by cosmic rays in the Earth's magnetosphere.

The existence of significant fluxes of antiparticles in the Earth magnetosphere has been predicted on theoretical considerations in this article. These antiparticles (positrons or antiprotons) at several hundred kilometers of altitudes, we believe are not of direct extraterrestrial origin, but are the natural products of nuclear reactions of the high energy primary cosmic rays (CR) and trapped protons (TP) confined in the terrestrial radiation belt, with the constituents of terrestrial atmosphere. Extraterrestrial positrons and antiprotons born in nuclear reactions of the same CR particles passing through only 5-7 g/cm2 of interstellar matter, exhibit lower fluxes compared to the antiprotons born at hundreds of g/cm2 in the atmosphere, which when confined in the magnetic field of the Earth (in any other planet), get accumulated. We present the results of the computations of the antiproton fluxes at 10 MeV to several GeV energies due to CR particle interactions with the matter in the interstellar space, and also with the residual atmosphere at altitudes of approximately 1000 km over the Earth's surface. The estimates show that the magnetospheric antiproton fluxes are greater by two orders of magnitude compared to the extraterrestrial fluxes measured at energies <1-2 GeV.