“兰花”(Orchidee)——制定中的战场监视系统研究计划

“兰花”是一种战场监视系统,法国陆军准备在九十年代使用它。 在制定该项研究计划时,采用了用于该系统空中部分的飞行验证飞机和地面部分的数字仿真技术。 本文叙述利用了这些设施后所进行的一些主要试验项目,以及得到的主要试验结果。     

Linear Shaped Charge Cutting Property and Charge Cutting Mechanism of Mg-Gd-Y-Zn Alloy

The linear shaped charge cutting technology is an effective technology for aircraft separation. It can separate invalid components from aircrafts timely to achieve light-weight. Magnesium alloy is the lightest metal material, and can be used to cast effective light-weight components of an aircraft construction. However, the application study of the linear shaped charge cutting technology on magnesium alloy components is basically blank. In response to the demand for the linear separation of magnesium alloys, the Mg-12Gd-0.5Y-0.4Zn alloy is selected to carry out the target shaped charge cutting test. The effects of the shaped charge line density, cutting thickness, and mechanical properties on the cutting performance of the alloy are studied. The shaped charge cutting mechanism is analyzed through the notch structure. The results show that the linear shaped charge cutting performance is significantly affected by the penetration and the collapse. The higher the linear density is, the stronger the ability of the linear shaped charge cutter is, and the greater the penetration depth is, which is advantageous. However, the target structure will be damaged when it is too large (e.g., 4.5 g?m-1). Within 12 mm, when the cutting thickness of the target increases, the penetration depth increases. The lower the tensile strength is, the greater the penetration depth is, and the more conducive the penetration depth to the shaped charge cutting is. When the elongation (EL) increases to 12%, the collapse of the target is incomplete and the target cannot be separated. When the tensile strength of the Mg-Gd-Y-Zn alloy is less than 350 MPa, the EL is less than 6.5%, the cutting thickness is less than 12 mm, and the linear shaped charge cutting of the magnesium alloy can be achieved stably.     

Effect of Isothermal Forging on the Microstructure and Mechanical Properties of Mg-8Gd-3Y-0.5Zr Alloy

Aiming at the problems of poor plastic forming ability， narrow forging temperature range， and strain rate sensitivity of rare earth magnesium alloys， a study on the microstructure and mechanical properties of Mg-8Gd-3Y-0.5Zr alloy with different isothermal forging processes is carried out. The microstructure and properties of the alloy in the as-cast， isothermal forged， and post-aging states after forging are studied with optical microscope (OM)， scanning electron microscope (SEM)， and tensile testing. The results show that significant dynamic recrystallization occurs during the isothermal forging process， a fine equiaxed grain structure is formed， and the mechanical properties of the alloy are greatly improved. When the isothermal forging temperature is 460 ºC and the strain rate is 0.02 s－1， the alloy structure performance is the best， the room temperature tensile yield strength (TYS) is 218 MPa， the ultimate tensile strength (UTS) is 299 MPa， and the fracture elongation (FE) is 19.2%. When the alloy is post-forging artificial aged， the α-Mg matrix is dispersed， the Mg5(Gd，Y) phase is precipitated， the UTS of the alloy is increased to 392 MPa， and the FE is reduced to 12.0%.     

Adaptive data fusion framework for modeling of non-uniform aerodynamic data

Multi-fidelity Data Fusion(MDF) frameworks have emerged as a prominent approach to producing economical but accurate surrogate models for aerodynamic data modeling by integrating data with different fidelity levels. However, most existing MDF frameworks assume a uniform data structure between sampling data sources; thus, producing an accurate solution at the required level, for cases of non-uniform data structures is challenging. To address this challenge, an Adaptive Multi-fidelity Data Fusion(...