库仑分析法测定岩矿石中的金

研究了氢醌库仑法测定金含量的方法、条件、考察共存离子的影响，并应用于岩矿石中金的分析。研究表明该法选择及结果都很好。     

Measurement of middle atmospheric ozone density profile by rocket-borne radiometer onboard KSR-II

KSR-II, a two-stage sounding rocket of KARI was launched successfully at the Korean Peninsula on June 11, 1998. The apogee of the rocket was 137 km. For the ozone measurement, 8-channel UV and visible radiometers were onboard the rocket. The rocket measured an in situ stratospheric and mesospheric ozone density profile over Korea during its ascending phase using the radiometer and transmitted the data to ground station in real time. The maximum ozone density occurs near 25 km. Retrieved profile has a random error (1σ) of approximately 15% for altitude below 20km, 7% between 20-50 km and 10% greater than 50 km. The retrieved data were compared with Dobson spectrophotometer, ozonesonde, and HALOE onboard the UARS. Our results are in reasonable agreements with others.     

Top-level modeling of an ALS system utilizing object-oriented techniques.

The possible configuration of an Advanced Life Support (ALS) System capable of supporting human life for long-term space missions continues to evolve as researchers investigate potential technologies and configurations. To facilitate the decision process the development of acceptable, flexible, and dynamic mathematical computer modeling tools capable of system level analysis is desirable. Object-oriented techniques have been adopted to develop a dynamic top-level model of an ALS system.This approach has several advantages; among these, object-oriented abstractions of systems are inherently modular in architecture. Thus, models can initially be somewhat simplistic, while allowing for adjustments and improvements. In addition, by coding the model in Java, the model can be implemented via the World Wide Web, greatly encouraging the utilization of the model. Systems analysis is further enabled with the utilization of a readily available backend database containing information supporting the model. The subsystem models of the ALS system model include Crew, Biomass Production, Waste Processing and Resource Recovery, Food Processing and Nutrition, and the Interconnecting Space. Each subsystem model and an overall model have been developed. Presented here is the procedure utilized to develop the modeling tool, the vision of the modeling tool, and the current focus for each of the subsystem models.     

Application of nonlinear filtering to navigation system designusing passive sensors

The problem of navigation system design for autonomous aircraft landing is addressed. New nonlinear filter structures are introduced to estimate the position and velocity of an aircraft with respect to a possibly moving landing site, such as a naval vessel, based on measurements provided by airborne vision and inertial sensors. By exploring the geometry of the navigation problem, the navigation filter dynamics are cast in the framework of linear parametrically varying systems (LPVs). Using this set-up, filter performance and stability are studied in an H_∞ setting by resorting to the theory of linear matrix inequalities (LMIs). The design of nonlinear, regionally stable filters to meet adequate H_∞ performance measures is thus converted into that of determining the feasibility of a related set of LMIs and finding a solution to them, if it exists. This is done by using-widely available numerical tools that borrow from convex optimization techniques. The mathematical framework that is required for integrated vision/inertial navigation system design is developed and a design example for an air vehicle landing on an aircraft carrier is detailed     

液膜法处理石化厂碱渣含酚废水的研究

本文研究了液膜法处理石化厂碱渣含酚废水的最佳制乳条件，最佳传质条件，并应用于不同浓度含酚水样处理。当挥发酚浓度低于７０００ＰＰｍ时，顷一级传质可使含酚量低于１００ＰＰｍ，７０００￣２００００ＰＰｍ，级二级传质可使含酚量低于１００ＰＰｍ，处理后废水可直接排放到石化厂和生化厂处理，为进一步进行中试研究提供了理论依据。     

导弹飞行安全区确定

对导弹飞行安全区进行了确切定义,分别对正常飞行弹安全区和故障飞行弹安全区进行了定量研究。在研究故障弹安全区时,从对导弹飞行安全产生的最终效果出发,对各种故障进行了科学分类,并建立了各类故障的故障方程,进而给出了导弹飞行安全区的计算模型和方法,这些模型和方法不仅符合故障飞行的物理背景,而且工程计算简单可靠。     

交互外形设计中的有理插值方法

在CAGD中,构造光滑曲线通过给定的二维或三维点集是非常重要的问题。广泛釆用的方法是Hermite技术,但是依照这种方法,插值曲线的形状过多地依赖于切矢的模长,且形状的修改不能依几何的方式交互完成。本文提出了一种结合交互技术和插值技术于一体的曲线插值方法,插值基函数为有理函数,在此基础上讨论了形状参数在几何修形中的作用,     

催化点火器高空点火性能的实验研究

介绍国产催化点火器高空点火性能模拟试验,主气流温度为５００℃左右、加力室压力为０．０４—０．１２ＭＰａ,对催化点火器的着火延迟时间和贫富油点火极限进行了测量。试验结果表明：当飞行高度为１７０００—１７５００ｍ,飞行马赫数Ｍａ＝１．０时,催化点火器可以正常点燃某型发动机加力燃烧室。     

脉冲多卜勒引信实时校准技术初步研究

脉冲多卜勒引信实时校准技术主要对引信回波模拟源的无线电引信技术指标进行准确评定,以达到校准的目的。目前对该类专用测试设备的校准仍停留在分项校准的状态,无法全面地对整个专用测试设备进行评定,本文利用"宽带数字接收+软件无线电"技术和解调算法,实现对引信回波模拟源的系统级校准的目的。     

堵塞条件下发动机高空试验推力差异分析

堵塞技术是降低发动机高空模拟试验成本和解决设备抽气能力不足的可行手段。在不同喷管排气环境压力条件下,某型带拉瓦尔喷管涡扇发动机完成了四组堵塞对推力影响的试验,发动机总推力试验值最大差异为6.2%。为揭示试验推力差异产生的原因,提高堵塞条件下发动机高空试验推力评估的准确性,开展了相关的理论分析和一维仿真计算,提出了主要影响量估算方法。结果表明：推力差异主要与发动机转速、结果修正方法和喷管扩张段流场特性有关;按文中提出的主要影响量估算方法计算了这些因素对推力的影响量,扣除影响量后总推力的最大差异降至0.8%;相同转速下,总推力相似换算值随喷管排气压力的升高呈增大趋势,最大差异达到3.3%。