A software package for computer-aided design analysis of thin-walled structures from composite materials

An algorithm of analyzing the design parameters for a thin-walled wing from composite material based on the efficient distribution of structural material between load-carrying elements is described. We consider the problems of convergence acceleration for the iteration design analysis. Also presented are the examples of determining the design parameters for a superlight aircraft wing and the rational parameters of the filler in the form of a three-dimensional rod structure.     

Water feed influence on nitric oxide emission under oxidation of near-stoichiometric air-methane mixtures

We considered the influence of temperature on the nitric oxide emission under combustion of the near-stoichiometric mixtures with and without water feed. We revealed the advantage of the method of fuel-water-air mixture combustion over that of the leaned mixture combustion.     

Systems for the indication and display of secondary information in avionics and autobasing complexes

We consider the peculiarities of application for the cabin indicating systems of secondary information display, formulate and systematize the compositional and technical requirements for display systems and their elements. The tendencies and lines in the development of head-up displays for avionics and autobasing complexes were determined. The technique of calculating optics of such display systems with the use of electronic distortion compensation is presented.     

The Relativistic Proton Spectrometer (RPS) for the Radiation Belt Storm Probes Mission

The Relativistic Proton Spectrometer (RPS) on the Radiation Belt Storm Probes spacecraft is a particle spectrometer designed to measure the flux, angular distribution, and energy spectrum of protons from ～60 MeV to ～2000 MeV. RPS will investigate decades-old questions about the inner Van Allen belt proton environment: a nearby region of space that is relatively unexplored because of the hazards of spacecraft operation there and the difficulties in obtaining accurate proton measurements in an intense penetrating background. RPS is designed to provide the accuracy needed to answer questions about the sources and losses of the inner belt protons and to obtain the measurements required for the next-generation models of trapped protons in the magnetosphere. In addition to detailed information for individual protons, RPS features count rates at a 1-second timescale, internal radiation dosimetry, and information about electrostatic discharge events on the RBSP spacecraft that together will provide new information about space environmental hazards in the Earth’s magnetosphere.     

Analysis of a beam with a crack under irregular cyclic load

This paper considers a beam with a technological longitudinal section on the level of the gravity center of the cross section that is loaded by a vertical concentrated force. We study the structure durability depending on the load amplitude and the initial crack length.     

多功能便携式数据采集系统设计与应用

为了满足航空发动机外场试验要求,针对某型发动机外场试验设计了多功能便携式数据采集系统。选用NI cDAQ等军品级电子器件采集发动机的压力、温度、转速等参数;采用市电与军品锂电池供电方式保证系统的正常工作;系统软件基于LabVIEW平台进行设计,实现了数据采集、显示、存储、复放、通道自检等功能;外场发动机在装机状态下即可利用该系统进行地面试验。外场测试结果表明:所设计的测试系统具备功能完善、使用方便、携带便捷等特点,可满足系统的设计要求。     

The Electric Antennas for the STEREO/WAVES Experiment

The STEREO/WAVES experiment is designed to measure the electric component of radio emission from interplanetary radio bursts and in situ plasma waves and fluctuations in the solar wind. Interplanetary radio bursts are generated from electron beams at interplanetary shocks and solar flares and are observed from near the Sun to 1 AU, corresponding to frequencies of approximately 16 MHz to 10 kHz. In situ plasma waves occur in a range of wavelengths larger than the Debye length in the solar wind plasma λ _D ≈10 m and appear Doppler-shifted into the frequency regime down to a fraction of a Hertz. These phenomena are measured by STEREO/WAVES with a set of three orthogonal electric monopole antennas. This paper describes the electrical and mechanical design of the antenna system and discusses efforts to model the antenna pattern and response and methods for in-flight calibration.     

The Plasma and Suprathermal Ion Composition (PLASTIC) Investigation on the STEREO Observatories

The Plasma and Suprathermal Ion Composition (PLASTIC) investigation provides the in situ solar wind and low energy heliospheric ion measurements for the NASA Solar Terrestrial Relations Observatory Mission, which consists of two spacecraft (STEREO-A, STEREO-B). PLASTIC-A and PLASTIC-B are identical. Each PLASTIC is a time-of-flight/energy mass spectrometer designed to determine the elemental composition, ionic charge states, and bulk flow parameters of major solar wind ions in the mass range from hydrogen to iron. PLASTIC has nearly complete angular coverage in the ecliptic plane and an energy range from ～0.3 to 80 keV/e, from which the distribution functions of suprathermal ions, including those ions created in pick-up and local shock acceleration processes, are also provided.     

New Horizons: Anticipated Scientific Investigations at the Pluto System

The New Horizons spacecraft will achieve a wide range of measurement objectives at the Pluto system, including color and panchromatic maps, 1.25–2.50 micron spectral images for studying surface compositions, and measurements of Pluto’s atmosphere (temperatures, composition, hazes, and the escape rate). Additional measurement objectives include topography, surface temperatures, and the solar wind interaction. The fulfillment of these measurement objectives will broaden our understanding of the Pluto system, such as the origin of the Pluto system, the processes operating on the surface, the volatile transport cycle, and the energetics and chemistry of the atmosphere. The mission, payload, and strawman observing sequences have been designed to achieve the NASA-specified measurement objectives and maximize the science return. The planned observations at the Pluto system will extend our knowledge of other objects formed by giant impact (such as the Earth–moon), other objects formed in the outer solar system (such as comets and other icy dwarf planets), other bodies with surfaces in vapor-pressure equilibrium (such as Triton and Mars), and other bodies with N₂:CH₄ atmospheres (such as Titan, Triton, and the early Earth).