磁粉探伤机周向电流单片微机控制器的研制

本文介绍一种新型磁粉探伤机周向电流的单片计算机控制器，文中详细介绍控制器的控制原理，结构，控制程序。该控制器对周向电流采用闭环控制，直接设定磁化电流，可保证电流稳定，电流设定值和实际电流值相差小于１０％，控制器还具有了出错检测，自动退磁功能。     

空天飞机的计算流体力学分析

本文分析了空天飞机空气动力学的特点和计算流体力学在发展空天飞机中的作用,讨论了发展空天飞机对计算流体力学的要求。强调了计算流体力学、地面试验和飞行试验应该相互结合成一个整体。在这基础上,探讨了利用地面试验对计算程序进行“确认”、“校准”和“鉴定”以及鉴定计算程序对地面试验的要求。本文还从计算方法、外流、进气道流动、喷管流动、燃烧室流动等方面,综述了空天飞机计算流体力学分析的最近进展和尚待解决的问题。最后对发展我国空天飞机计算流体力学提出了建议。     

耦合多体系统动力响应计算

由于弹性体与刚体之间的动力耦合，使得耦合多体系统的特征值问题非自共轭，难以用经典的模态分析方法解决含有刚、弹耦合多体系统的动力响应问题。本文以某多体系统为例，建立了耦合多体系统的特征值和边值问题的增广公式，进而求得了用正交的增广特征矢量级数表示的系统对任意激励的响应。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

四喷管射流流场的数值模拟及分析

本文分析了ENO格式的特点，并应用于全NS方程的迁移项和压力项，模拟了三维射流，首先计算了四喷管射流干扰流场，给出了相应的计算结果，指出了其四股射流外部有形成类似一股射流波系的趋势，而内部四股射流始终存在并相互作用，且伴随流对内部干扰流场有重要影响；然后计算了四股射流流入圆管内的流场，给出了壁面和截面物理量的分布，分析了其拓扑结构。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

推力中止过程一维不定常气相流动数值计算

准确地预示固体火箭发动机推力中止这一瞬变过程，对飞行器飞行精度及可靠性具有重要意义。建立了一维不定常流动数值计算模型，考虑了传热、摩擦、燃面变化，燃烧室长径比、通喉比等因素，计算了推力中止过程内弹道，给出了燃气参数沿燃烧室长度的分布及随时间的变化。     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。