Development of a thin section device for space exploration: Overview and system performance estimates

In this paper we present a conceptual design of a spaceborne instrument for the in situ production of rock thin sections on planetary surfaces. The in situ Automated Rock Thin Section Instrument (IS-ARTS) conceptual design demonstrates that the in situ production of thin sections on a planetary body is a plausible new instrument capability for future planetary exploration. Thin section analysis would reduce much ambiguity in the geological history of a sampled site that is present with instruments currently flown. The technical challenge of producing a thin section device compatible with the spacecraft environment is formidable and has been thought too technically difficult to be practical. Terrestrial thin section preparation requires a skilled petrographist, several preparation instruments that individually exceed typical spacecraft mass and power limits, and consumable materials that are not easily compatible with spaceflight. In two companion papers we present research and development work used to constrain the capabilities of IS-ARTS in the technical space compatible with the spacecraft environment. For the design configuration shown we conclude that a device can be constructed that is capable of 50 sample preparations over a 2 year lifespan with mass, power, and volume constraints compatible with current landed Mars mission configurations. The technical requirements of IS-ARTS (mass, power and number of samples produced) depend strongly on the sample mechanical properties, sample processing rate, the sample size and number of samples to be produced.     

Aircraft with outboard horizontal stabilizers,history, current status,development potential

The potential of using outboard horizontal stabilizers (OHS) to reduce aircraft drag, and hence improve fuel economy, was investigated historically, experimentally and theoretically. The feasibility of OHS configurations on the basis of the structural stress levels expected was also studied. The findings of the work showed that from simple, low Reynolds number, wind-tunnel tests, at a wing-chord-based Reynolds number of approximately 6×10⁴ and also from theoretical analyses for a higher Reynolds number of 9×10⁶, lift/drag (L/D) value increases in the region of 40–50% for wing and tail surfaces can be expected relative to corresponding values for conventional aircraft. When account is taken of fuselage and tail-support boom drag, the expected overall L/D increase is in the region of 30–35%. The analytical stress-level work showed that contrary to what, on a first thought basis, might be expected, there were no major stress problems. Flight tests at the University of Calgary, and by others elsewhere, employing radio-controlled, powered, model aircraft (i.e. UAVs) showed that aircraft of the OHS type were easily controlled in flight and were stable. An examination was made of additional areas that may contribute yet further to the development of the OHS concept.     

Development of a thin section device for space exploration: Rock cutting mechanism

We have developed a rock cutting mechanism for in situ planetary exploration based on abrasive diamond impregnated wire. Performance characteristics of the rock cutter, including cutting rate on several rock types, cutting surface lifetime, and cut rock surface finish are presented. The rock cutter was developed as part of a broader effort to develop an in situ automated rock thin section (IS-ARTS) instrument. The objective of IS-ARTS was to develop an instrument capable of producing petrographic rock thin sections on a planetary science spacecraft. The rock cutting mechanism may also be useful to other planetary science missions with in situ instruments in which sub-sampling and rock surface preparation are necessary.     

Atmospheric Science with InSight

In November 2018, for the first time a dedicated geophysical station, the InSight lander, will be deployed on the surface of Mars. Along with the two main geophysical packages, the Seismic Experiment for Interior Structure (SEIS) and the Heat-Flow and Physical Properties Package (HP³), the InSight lander holds a highly sensitive pressure sensor (PS) and the Temperature and Winds for InSight (TWINS) instrument, both of which (along with the InSight FluxGate (IFG) Magnetometer) form the Auxiliary Sensor Payload Suite (APSS). Associated with the RADiometer (RAD) instrument which will measure the surface brightness temperature, and the Instrument Deployment Camera (IDC) which will be used to quantify atmospheric opacity, this will make InSight capable to act as a meteorological station at the surface of Mars. While probing the internal structure of Mars is the primary scientific goal of the mission, atmospheric science remains a key science objective for InSight. InSight has the potential to provide a more continuous and higher-frequency record of pressure, air temperature and winds at the surface of Mars than previous in situ missions. In the paper, key results from multiscale meteorological modeling, from Global Climate Models to Large-Eddy Simulations, are described as a reference for future studies based on the InSight measurements during operations. We summarize the capabilities of InSight for atmospheric observations, from profiling during Entry, Descent and Landing to surface measurements (pressure, temperature, winds, angular momentum), and the plans for how InSight’s sensors will be used during operations, as well as possible synergies with orbital observations. In a dedicated section, we describe the seismic impact of atmospheric phenomena (from the point of view of both “noise” to be decorrelated from the seismic signal and “signal” to provide information on atmospheric processes). We discuss in this framework Planetary Boundary Layer turbulence, with a focus on convective vortices and dust devils, gravity waves (with idealized modeling), and large-scale circulations. Our paper also presents possible new, exploratory, studies with the InSight instrumentation: surface layer scaling and exploration of the Monin-Obukhov model, aeolian surface changes and saltation / lifing studies, and monitoring of secular pressure changes. The InSight mission will be instrumental in broadening the knowledge of the Martian atmosphere, with a unique set of measurements from the surface of Mars.     

The Emirates Mars Mission (EMM) Emirates Mars InfraRed Spectrometer (EMIRS) Instrument

Space Science Reviews - Modern observatories have revealed the ubiquitous presence of magnetohydrodynamic waves in the solar corona. The propagating waves (in contrast to the standing waves) are...     

Morphological biosignatures and the search for life on Mars

This report provides a rationale for the advances in instrumentation and understanding needed to assess claims of ancient and extraterrestrial life made on the basis of morphological biosignatures. Morphological biosignatures consist of bona fide microbial fossils as well as microbially influenced sedimentary structures. To be recognized as evidence of life, microbial fossils must contain chemical and structural attributes uniquely indicative of microbial cells or cellular or extracellular processes. When combined with various research strategies, high-resolution instruments can reveal such attributes and elucidate how morphological fossils form and become altered, thereby improving the ability to recognize them in the geological record on Earth or other planets. Also, before fossilized microbially influenced sedimentary structures can provide evidence of life, criteria to distinguish their biogenic from non-biogenic attributes must be established. This topic can be advanced by developing process-based models. A database of images and spectroscopic data that distinguish the suite of bona fide morphological biosignatures from their abiotic mimics will avoid detection of false-positives for life. The use of high-resolution imaging and spectroscopic instruments, in conjunction with an improved knowledge base of the attributes that demonstrate life, will maximize our ability to recognize and assess the biogenicity of extraterrestrial and ancient terrestrial life.     

Conversations with John H. Glenn Jr. Interview by Frank Sietzen Jr

Senator Glenn is interviewed about his experiences on Friendship 7 and the Shuttle Discovery, expectations of early astronauts, lunar missions, the International Space Station, international dimensions of space activities, public confidence in NASA, attracting young people to the aerospace industry, highlights of his career, and the future of flight.     

The decision to develop the Space Shuttle

Many of the problems that the Space Shuttle programme has had in meeting its goals of routine and cost-effective access to space can be traced to various characteristics of the decision to develop the Space Shuttle. That decision was made through a process of bureaucratic politics, with little attention given to future users of the Shuttle. The design chosen for development was a poor compromise between demanding Pentagon and NASA requirements and a limited budget.     

Post: Polar stratospheric telescope

The tropopause, typically at 16 to 18 km altitude at the lower latitudes, dips to 8 km in the polar regions. This makes the cold, dry and nonturbulent lower stratosphere accessible to tethered aerostats. Tethered aerostats can fly as high as 12 km and are extremely reliable, lasting for many years. In contrast to free-flying balloons, they can stay on station for weeks at a time, and payloads can be safely recovered for maintenance and adjustment and relaunched in a matter of hours. We propose to use such a platform, located first in the Arctic (near Fairbanks, Alaska) and, potentially, later in the Antarctic, to operate a new technology 6-meter, diluted aperture telescope with diffraction-limited performance in the near infrared. Thanks to the low ambient temperature (220 K), thermal emission from the optics is of the same order as that of the zodiacal light in the 2 to 3 micron band. Since this wavelength interval is the darkest part of the zodiacal light spectrum from optical wavelengths to 100 microns, the combination of high resolution images and a very dark sky make it the spectral region of choice for observing the redshifted light from galaxies and clusters of galaxies at moderate to high redshifts.Affiliated to the Astrophysics Division, Space Science Department, European Space Agency