Optimal aeroassisted return from high earth orbit with plane change

This paper gives a complete analysis of the problem of aeroassisted return from a high Earth orbit to a low Earth orbit with plane change. A discussion of pure propulsive maneuver leads to the necessary change for improvement of the fuel consumption by inserting in the middle of the trajectory an atmospheric phase to obtain all or part of the required plane change. The variational problem is reduced to a parametric optimization problem by using the known results in optimal impulsive transfer and solving the atmospheric turning problem for storage and use in the optimization process. The coupling effect between space maneuver and atmospheric maneuver is discussed. Depending on the values of the plane change i, the ratios of the radii, $\text{n =}\text{r}{}_1\text{r}{}_2$ between the orbits and $\text{a =}\text{r}{}_2\text{R}$ between the low orbit and the atmosphere, and the maximum lift-to-drag ratio E1 of the vehicle, the optimal maneuver can be pure propulsive or aeroassisted. For aeroassisted maneuver, the optimal mode can be parabolic, which requires only drag capability of the vehicle, or elliptic. In the elliptic mode, it can be by one-impulse for deorbit and one or two-impulse in postatmospheric flight, or by two-impulse for deorbit with only one impulse for final circularization. It is shown that whenever an impulse is applied, a plane change is made. The necessary conditions for the optimal split of the plane changes are derived and mechanized in a program routine for obtaining the solution.     

Collision risk-capacity tradeoff analysis of an en-route corridor model

Flow corridors are a new class of trajectory-based airspace which derives from the next generation air transportation system concept of operations. Reducing the airspace complexity and increasing the capacity are the main purposes of the en-route corridor. This paper analyzes the collision risk-capacity tradeoff using a combined discrete–continuous simulation method. A basic two-dimensional en-route flow corridor with performance rules is designed as the operational environment. A second-order system is established by combining the point mass model and the proportional derivative controller together to simulate the self-separation operations of the aircrafts in the corridor and the operation performance parameters from the User Manual for the Base of Aircraft Data are used in this research in order to improve the reliability. Simulation results indicate that the aircrafts can self-separate from each other efficiently by adjusting their velocities,and rationally setting the values of some variables can improve the rate and stability of the corridor with low risks of loss of separation.     

一种大变形多空间域连续体结构拓扑优化方法

针对大变形非线性结构拓扑优化问题,提出了基于混合细胞自动机(HCA, Hybrid Cellular Automata)多空间域连续体结构拓扑优化方法;采用密度法,建立了单元相对密度表示的材料弹-塑性模型;以单元相对密度和应变能作为细胞自动机(CA,Cellular Automata)的状态信息,利用CA局部控制规则,修改相对密度,迭代实现各设计空间域应变能均匀分布;设计了多空间域拓扑优化HCA算法,采取多个对象同时耦合优化迭代,各自收敛策略,解决了多空间域优化迭代算法收敛稳定性问题;最后,以汽车保险杆结构横梁和支撑等两个设计空间为例,施加大变形动态载荷作用,对提出的多空间结构优化算法进行了验证,优化后结构有效地降低了碰撞作用力峰值达54％,提高了结构安全性.     

Ground based ISS payload microgravity disturbance assessments

In order to verify that the International Space Station (ISS) payload facility racks do not disturb the microgravity environment of neighboring facility racks and that the facility science operations are not compromised, a testing and analytical verification process must be followed. Currently no facility racks have taken this process from start to finish. The authors are participants in implementing this process for the NASA Glenn Research Center (GRC) Fluids and Combustion Facility (FCF). To address the testing part of the verification process, the Microgravity Emissions Laboratory (MEL) was developed at GRC. The MEL is a 6 degree of freedom inertial measurement system capable of characterizing inertial response forces (emissions) of components, sub-rack payloads, or rack-level payloads down to 10(-7) g's. The inertial force output data, generated from the steady state or transient operations of the test articles, are utilized in analytical simulations to predict the on-orbit vibratory environment at specific science or rack interface locations. Once the facility payload rack and disturbers are properly modeled an assessment can be made as to whether required microgravity levels are achieved. The modeling is utilized to develop microgravity predictions which lead to the development of microgravity sensitive ISS experiment operations once on-orbit. The on-orbit measurements will be verified by use of the NASA GRC Space Acceleration Measurement System (SAMS). The major topics to be addressed in this paper are: (1) Microgravity Requirements, (2) Microgravity Disturbers, (3) MEL Testing, (4) Disturbance Control, (5) Microgravity Control Process, and (6) On-Orbit Predictions and Verification.     

Spending without results: lessons from the space station program

The US spent all of the funds originally estimated for the initial development of its orbital space station without producing any significant amount of flight hardware. This article shows how a project with large design costs and significant “non-prime” outlays can quickly deplete program funds. The authors recount the way in which budgetary politics, congressional micro-management, and technological risk conspired to produce this result.     

电磁流体动力驱动流体搅拌混合器特性研究

对小型电磁流体动力搅拌混合器的特性进行了理论分析和实验研究.该小型电磁动力混合器由聚碳酸脂和黄铜采用常规机械加工方法加工而成.研究采用的流体为氯化钠水溶液.为了观察流体的搅拌混合运动,在流体中加入微量微细玻璃珠作为示踪粒子.采用显微观测及图像采集技术记录流体的搅拌混合过程,用数字图像处理技术对流体速度场进行分析.建立了搅拌混合器的理论模型,并对其动力特性进行了数值分析,理论结果与实验结果相吻合.该小型电磁动力混合器已应用于微管道流动的混合控制并可应用于其它微流体控制系统中.     

Experiments with a Low Polarization Error Loop Array Direction Finder

A previously reported HF loop antenna array for multipolarization direction finding consisting of two spaced loops is described. The method is compatible with twin channel Watson-Watt operation as an Adcock so that the direction finding process is independent of polarization characteristics of the element pattern. Experimentally measured direction finder (DF) bearings were compared with near simultaneous polarimeter data and conventional crossed loops bearings. A major reduction in polarization error was obtained at the expense of full 360° azimuth response. It is theoretically possible to cover 360° with two similar arrays of the type investigated or with crossed loops elements with quadrature phase shifters.     

Reconstituting the US space programme

This response to Alex Roland's article, ‘Priorities in space for the USA’, argues that his analysis and conclusions are based on shaky historical evidence. Professor Roland's interpretation of NASA's priorities since 1959 is challenged, and it is pointed out that the manned spaceflight programme has widespread support in the USA. The most important issue, raised by the article but not treated extensively enough, is whether the pursuit of the widely accepted emphasis on manned spaceflight is a large-scale societal mistake.