The Mercury Dual Imaging System on the MESSENGER Spacecraft

The Mercury Dual Imaging System (MDIS) on the MESSENGER spacecraft will provide critical measurements tracing Mercury’s origin and evolution. MDIS consists of a monochrome narrow-angle camera (NAC) and a multispectral wide-angle camera (WAC). The NAC is a 1.5° field-of-view (FOV) off-axis reflector, coaligned with the WAC, a four-element refractor with a 10.5° FOV and 12-color filter wheel. The focal plane electronics of each camera are identical and use a 1,024×1,024 Atmel (Thomson) TH7888A charge-coupled device detector. Only one camera operates at a time, allowing them to share a common set of control electronics. The NAC and the WAC are mounted on a pivoting platform that provides a 90° field-of-regard, extending 40° sunward and 50° anti-sunward from the spacecraft +Z-axis—the boresight direction of most of MESSENGER’s instruments. Onboard data compression provides capabilities for pixel binning, remapping of 12-bit data into 8 bits, and lossless or lossy compression. MDIS will acquire four main data sets at Mercury during three flybys and the two-Mercury-solar-day nominal mission: a monochrome global image mosaic at near-zero emission angles and moderate incidence angles, a stereo-complement map at off-nadir geometry and near-identical lighting, multicolor images at low incidence angles, and targeted high-resolution images of key surface features. These data will be used to construct a global image base map, a digital terrain model, global maps of color properties, and mosaics of high-resolution image strips. Analysis of these data will provide information on Mercury’s impact history, tectonic processes, the composition and emplacement history of volcanic materials, and the thickness distribution and compositional variations of crustal materials. This paper summarizes MDIS’s science objectives and technical design, including the common payload design of the MDIS data processing units, as well as detailed results from ground and early flight calibrations and plans for Mercury image products to be generated from MDIS data.     

Total solar irradiance measurements by ERB/Nimbus-7. A review of nine years

The advent of reliable extraterrestrial solar irradiance measurements from satellites has supplied the impetus for new research in solar physics and solar-terrestrial relationships. The records for the principal experiments now extend beyond nine years. The Nimbus-7 measurements began in November 1978 and the Solar Maximum Mission (SMM) results started in February 1980. Both the ERB experiment of Nimbus-7 and the ACRIM experiment of SMM are still operational as of this writing (June 1988). We describe the nine-year Nimbus-7 total solar irradiance data set and compare it with similar data sets from the SMM and other satellite solar monitoring programs. Long-term downward trends of less than 0.02 % per year had been noted during the decaying portion of solar cycle 21 with indications that a leveling off and possible reversal of the trend was being experienced as we enter the new cycle. It had been demonstrated that fluctuations in the data over shorter periods corresponded to solar activity, from a primary discovery of irradiance depletions in times of building large sunspot groups to more subtle effects on the scale of solar rotation. Studies of the frequency spectra of the measurements have advanced the interest in helioseismology or mode analysis. Studies of photospheric activity have advanced by modelling of the sunspot blocking and photospheric brightening versus the measured irradiance. The theories are being extended to longer time-scales which indicate that solar irradiance is higher near solar cycle maximum, as defined by activity, and somewhat lower during the period between cycles. While measurements of total solar irradiance, the solar constant, alone cannot be employed to answer all of the questions of solar physics or helioclimatology, these long-term, high-precision data sets are valuable to both disciplines. The continuation of such measurements to more meaningful, longer time-scales should have a high priority in the international space community.     

Black hole spectral states and physical connections

The dramatic changes seen in the X-ray spectral and timing properties of accreting black hole candidates (BHCs) provide important clues about the accretion and jet formation processes that occur in these systems. Dividing the different source behaviors into spectral states provides a framework for studying BHCs. To date, there have been three main classification schemes with Luminosity-based, Component-based, or Transition-based criteria. The canonical, Luminosity-based criteria and physical models that are based on this concept do not provide clear explanations for several phenomena, including hysteresis of spectral states and the presence of jets. I discuss the re-definitions of states, focusing on an application of the Component-based states to more than 400 RXTE observations of the recurrent BHC 4U 1630–47. We compare the X-ray properties for the recent 2002–2004 outburst to those of an earlier (1998) outburst, during which radio jets were observed. The results suggest a connection between hysteresis of states and major jet ejections, and it is possible that both of these are related to the evolution of the inner radius of the optically thick accretion disk.     

Preliminary validation of computational procedures for a new atmospheric ionizing radiation (AIR) model.

A new computational procedure to determine particle fluxes in the Earth's atmosphere is presented. The primary cosmic ray spectrum has been modeled through an analysis of simultaneous proton and helium measurements made on high altitude balloon flights and spacecraft. An improved global fit to the data was achieved through applying a unique technique utilizing the Fokker-Plank equation with a non-linear rigidity-dependent diffusion coefficient. The propagation of primary particles through the Earth's atmosphere is calculated with a three-dimensional Monte Carlo transport program called FLUKA. Primary protons and helium nuclei (alphas) are generated within the rigidity range of 0.5 GV-20 TV uniform in cos2 theta. For a given location, primaries above the effective cutoff rigidity are transported through the atmosphere. Alpha particles are initially transported with a separate package called HEAVY to simulate fragmentation. This package interfaces with FLUKA to provide interaction starting points for each nucleon originating from a helium nucleus. Results from this calculation are presented and compared to measurements.     

Latitudinal variations in the solar wind electron heat flux

Ulysses measurements of the solar wind electron heat flux as a function of heliographic latitude are presented. The latitudinal in the electron heat flux presented have been normalized by the radial gradient in the electron heat flux obtained during the in-ecliptic phase of the Ulysses mission (q_e R^–3.0). We find no significant variation in electron heat flux with latitude.     

Analysis of Warning Times For Collision Avoidance Systems

The time required to execute a successful escape maneuver must be deduced from considerations of the following times: time required to gain adequate altitude separation, delay time due to pilot reaction, aircraft servo-system delay, delay due to missed data, delay due to data arrival time, alarm delay due to ? errors, time to stop turning, and time to level off. Since each of these times is a random variable, the required escape time must be determined in a probabilistic sense. By assigning appropriate probability density functions to each of the times involved, formulas are derived for the escape times required by the CAS hazard logic. The results of a simulation of 10 000 aircraft encounters verify the suitability of the formulas.     

Contents of Volume 1

Volume Contents

Contents of Volume 1     

The Emirates Mars Mission (EMM) Emirates Mars InfraRed Spectrometer (EMIRS) Instrument

Space Science Reviews - Modern observatories have revealed the ubiquitous presence of magnetohydrodynamic waves in the solar corona. The propagating waves (in contrast to the standing waves) are...     

Atmospheric Science with InSight

In November 2018, for the first time a dedicated geophysical station, the InSight lander, will be deployed on the surface of Mars. Along with the two main geophysical packages, the Seismic Experiment for Interior Structure (SEIS) and the Heat-Flow and Physical Properties Package (HP³), the InSight lander holds a highly sensitive pressure sensor (PS) and the Temperature and Winds for InSight (TWINS) instrument, both of which (along with the InSight FluxGate (IFG) Magnetometer) form the Auxiliary Sensor Payload Suite (APSS). Associated with the RADiometer (RAD) instrument which will measure the surface brightness temperature, and the Instrument Deployment Camera (IDC) which will be used to quantify atmospheric opacity, this will make InSight capable to act as a meteorological station at the surface of Mars. While probing the internal structure of Mars is the primary scientific goal of the mission, atmospheric science remains a key science objective for InSight. InSight has the potential to provide a more continuous and higher-frequency record of pressure, air temperature and winds at the surface of Mars than previous in situ missions. In the paper, key results from multiscale meteorological modeling, from Global Climate Models to Large-Eddy Simulations, are described as a reference for future studies based on the InSight measurements during operations. We summarize the capabilities of InSight for atmospheric observations, from profiling during Entry, Descent and Landing to surface measurements (pressure, temperature, winds, angular momentum), and the plans for how InSight’s sensors will be used during operations, as well as possible synergies with orbital observations. In a dedicated section, we describe the seismic impact of atmospheric phenomena (from the point of view of both “noise” to be decorrelated from the seismic signal and “signal” to provide information on atmospheric processes). We discuss in this framework Planetary Boundary Layer turbulence, with a focus on convective vortices and dust devils, gravity waves (with idealized modeling), and large-scale circulations. Our paper also presents possible new, exploratory, studies with the InSight instrumentation: surface layer scaling and exploration of the Monin-Obukhov model, aeolian surface changes and saltation / lifing studies, and monitoring of secular pressure changes. The InSight mission will be instrumental in broadening the knowledge of the Martian atmosphere, with a unique set of measurements from the surface of Mars.     

Identification of morphological biosignatures in Martian analogue field specimens using in situ planetary instrumentation

We have investigated how morphological biosignatures (i.e., features related to life) might be identified with an array of viable instruments within the framework of robotic planetary surface operations at Mars. This is the first time such an integrated lab-based study has been conducted that incorporates space-qualified instrumentation designed for combined in situ imaging, analysis, and geotechnics (sampling). Specimens were selected on the basis of feature morphology, scale, and analogy to Mars rocks. Two types of morphological criteria were considered: potential signatures of extinct life (fossilized microbial filaments) and of extant life (crypto-chasmoendolithic microorganisms). The materials originated from a variety of topical martian analogue localities on Earth, including impact craters, high-latitude deserts, and hydrothermal deposits. Our in situ payload included a stereo camera, microscope, M?ssbauer spectrometer, and sampling device (all space-qualified units from Beagle 2), and an array of commercial instruments, including a multi-spectral imager, an X-ray spectrometer (calibrated to the Beagle 2 instrument), a micro-Raman spectrometer, and a bespoke (custom-designed) X-ray diffractometer. All experiments were conducted within the engineering constraints of in situ operations to generate realistic data and address the practical challenges of measurement. Our results demonstrate the importance of an integrated approach for this type of work. Each technique made a proportionate contribution to the overall effectiveness of our "pseudopayload" for biogenic assessment of samples yet highlighted a number of limitations of current space instrument technology for in situ astrobiology.