Biomarker response to galactic cosmic ray-induced NOx and the methane greenhouse effect in the atmosphere of an Earth-like planet orbiting an M dwarf star

Planets orbiting in the habitable zone of M dwarf stars are subject to high levels of galactic cosmic rays (GCRs), which produce nitrogen oxides (NOx) in Earth-like atmospheres. We investigate to what extent these NO(Mx) species may modify biomarker compounds such as ozone (O3) and nitrous oxide (N2O), as well as related compounds such as water (H2O) (essential for life) and methane (CH4) (which has both abiotic and biotic sources). Our model results suggest that such signals are robust, changing in the M star world atmospheric column due to GCR NOx effects by up to 20% compared to an M star run without GCR effects, and can therefore survive at least the effects of GCRs. We have not, however, investigated stellar cosmic rays here. CH4 levels are about 10 times higher on M star worlds than on Earth because of a lowering in hydroxyl (OH) in response to changes in the ultraviolet. The higher levels of CH4 are less than reported in previous studies. This difference arose partly because we used different biogenic input. For example, we employed 23% lower CH4 fluxes compared to those studies. Unlike on Earth, relatively modest changes in these fluxes can lead to larger changes in the concentrations of biomarker and related species on the M star world. We calculate a CH4 greenhouse heating effect of up to 4K. O3 photochemistry in terms of the smog mechanism and the catalytic loss cycles on the M star world differs considerably compared with that of Earth.     

Advantages of using subsurface flow constructed wetlands for wastewater treatment in space applications: ground-based Mars Base prototype.

Research and design of subsurface flow wetland wastewater treatment systems for a ground-based experimental prototype Mars Base facility has been carried out, using a subsurface flow approach. These systems have distinct advantages in planetary exploration scenarios: they are odorless, relatively low-labor and low-energy, assist in purification of water and recycling of atmospheric CO2, and will support some food crops. An area of 6-8 m2 may be sufficient for integration of wetland wastewater treatment with a prototype Mars Base supporting 4-5 people. Discharge water from the wetland system will be used as irrigation water for the agricultural crop area, thus ensuring complete recycling and utilization of nutrients. Since the primary requirements for wetland treatment systems are warm temperatures and lighting, such bioregenerative systems may be integrated into early Mars base habitats, since waste heat from the lights may be used for temperature maintenance in the human living environment. "Wastewater gardens (TM)" can be modified for space habitats to lower space and mass requirements. Many of its construction requirements can eventually be met with use of in-situ materials, such as gravel from the Mars surface. Because the technology requires little machinery and no chemicals, and relies more on natural ecological mechanisms (microbial and plant metabolism), maintenance requirements are minimized, and systems can be expected to have long operating lifetimes. Research needs include suitability of Martian soil and gravel for wetland systems, system sealing and liner options in a Mars Base, and wetland water quality efficiency under varying temperature and light regimes.     

Human navigation ability: Tests of the encoding-error model of path integration

This paper tests the generality and implications of an encoding-error model (Fujita et al. 1993) of humans' ability to keep track of their position in space in the absence of visual cues (i.e., by nonvisual path integration). The model proposes that when people undergo nonvisually guided travel, they encode the distances and turns that they experience, and their errors reflect systematic inaccuracies in the encoding process. Thus when people try to return to the origin of travel, they base their response on mis-encoded values of the outbound distances and turns. The two experiments reported here addressed three issues related to the model: (i) whether path integration is context-dependent and if so, how rapidly it adapts to recently experienced distances and turns; (ii) whether effects of experience can be specifically attributed to changes in the encoding process, and if so, what changes; and (iii) whether the encoding process represents distances and turns in the individual paths without considering their spatial relationship to one another (i.e., an object-centered representation). Testing these issues allows us to evaluate and develop the model.Subjects who were blindfolded or had restricted vision were led through two legs of a triangle and the turn between, then tried to return to the origin. Paths varied in whether experienced legs and turns were small or large (Experiment 1) and in variability of return and outbound course (Experiment 2). Response turn, distance and course were determined. The assumption of immutable encoding functions was not supported; encoding processes were context dependent, although they did not adapt within a block of trials. Although effects of experience could be accounted for by the model, the affected parameters were not always as predicted, and in some cases additional parameters were necessary. Results of manipulating variability in return course were consistent with the model's assumption of object-centered representation.     

Generating precise and homogeneous orbits for Jason-1 and Jason-2

Driven by the GMES (Global Monitoring for Environment and Security) and GGOS (Global Geodetic Observing System) initiatives the user community has a strong demand for high-quality altimetry products. In order to derive such high-quality altimetry products, precise orbits for the altimetry satellites are a necessity. With the launch of the TOPEX/Poseidon mission in 1992 a still on-going time series of high-accuracy altimetry measurements of ocean topography started, continued by the altimetry missions Jason-1 in 2001 and Jason-2/OSTM in 2008. This paper contributes to the on-going orbit reprocessing carried out by several groups and presents the efforts of the Navigation Support Office at ESA/ESOC using its NAPEOS software for the generation of precise and homogeneous orbits referring to the same reference frame for the altimetry satellites Jason-1 and Jason-2. Data of all three tracking instruments on-board the satellites (beside the altimeter), i.e. GPS, DORIS, and SLR measurements, were used in a combined data analysis. About 7 years of Jason-1 data and more than 1 year of Jason-2 data were processed. Our processing strategy is close to the GDR-C standards. However, we estimated slightly different scaling factors for the solar radiation pressure model of 0.96 and 0.98 for Jason-1 and Jason-2, respectively. We used 30 s sampled GPS data and introduced 30 s satellite clocks stemming from ESOC’s reprocessing of the combined GPS/GLONASS IGS solution. We present the orbit determination results, focusing on the benefits of adding GPS data to the solution. The fully combined solution was found to give the best orbit results. We reach a post-fit RMS of the GPS phase observation residuals of 6 mm for Jason-1 and 7 mm for Jason-2. The DORIS post-fit residuals clearly benefit from using GPS data in addition, as the DORIS data editing improves. The DORIS observation RMS for the fully combined solution is with 3.5 mm and 3.4 mm, respectively, 0.3 mm better than for the DORIS-SLR solution. Our orbit solution agrees well with external solutions from other analysis centers, as CNES, LCA, and JPL. The orbit differences between our fully combined orbits and the CNES GDR-C orbits are of about 0.8 cm for Jason-1 and at 0.9 cm for Jason-2 in the radial direction. In the cross-track component we observe a clear improvement when adding GPS data to the POD process. The 3D-RMS of the orbit differences reveals a good orbit consistency at 2.7 cm and 2.9 cm for Jason-1 and Jason-2. Our resulting orbit series for both Jason satellites refer to the ITRF2005 reference frame and are provided in sp3 file format on our ftp server.     

The Pluto Energetic Particle Spectrometer Science Investigation (PEPSSI) on the New Horizons Mission

The Pluto Energetic Particle Spectrometer Science Investigation (PEPSSI) comprises the hardware and accompanying science investigation on the New Horizons spacecraft to measure pick-up ions from Pluto’s outgassing atmosphere. To the extent that Pluto retains its characteristics similar to those of a “heavy comet” as detected in stellar occultations since the early 1980s, these measurements will characterize the neutral atmosphere of Pluto while providing a consistency check on the atmospheric escape rate at the encounter epoch with that deduced from the atmospheric structure at lower altitudes by the ALICE, REX, and SWAP experiments on New Horizons. In addition, PEPSSI will characterize any extended ionosphere and solar wind interaction while also characterizing the energetic particle environment of Pluto, Charon, and their associated system. First proposed for development for the Pluto Express mission in September 1993, what became the PEPSSI instrument went through a number of development stages to meet the requirements of such an instrument for a mission to Pluto while minimizing the required spacecraft resources. The PEPSSI instrument provides for measurements of ions (with compositional information) and electrons from 10 s of keV to ～1 MeV in a 160°×12° fan-shaped beam in six sectors for 1.5 kg and ～2.5 W.     

Rosetta Radio Science Investigations (RSI)

The Rosetta spacecraft has been successfully launched on 2nd March 2004 to its new target comet 67 P/Churyumov-Gerasimenko. The science objectives of the Rosetta Radio Science Investigations (RSI) experiment address fundamental aspects of cometary physics such as the mass and bulk density of the nucleus, its gravity field, its interplanetary orbit perturbed by nongravitational forces, its size and shape, its internal structure, the composition and roughness of the nucleus surface, the abundance of large dust grains, the plasma content in the coma and the combined dust and gas mass flux. The masses of two asteroids, Steins and Lutetia, shall be determined during flybys in 2008 and 2010, respectively. Secondary objectives are the radio sounding of the solar corona during the superior conjunctions of the spacecraft with the Sun during the cruise phase. The radio carrier links of the spacecraft Telemetry, Tracking and Command (TT&C) subsystem between the orbiter and the Earth will be used for these investigations. An Ultrastable oscillator (USO) connected to both transponders of the radio subsystem serves as a stable frequency reference source for both radio downlinks at X-band (8.4 GHz) and S-band (2.3 GHz) in the one-way mode. The simultaneous and coherent dual-frequency downlinks via the High Gain Antenna (HGA) permit separation of contributions from the classical Doppler shift and the dispersive media effects caused by the motion of the spacecraft with respect to the Earth and the propagation of the signals through the dispersive media, respectively. The investigation relies on the observation of the phase, amplitude, polarization and propagation times of radio signals transmitted from the spacecraft and received with ground station antennas on Earth. The radio signals are affected by the medium through which the signals propagate (atmospheres, ionospheres, interplanetary medium, solar corona), by the gravitational influence of the planet on the spacecraft and finally by the performance of the various systems involved both on the spacecraft and on ground.     

Planning for the international space year

Preparations and proposals for the 1992 International Space Year are being made which cover a wide range of activities, organizations and nations; the momentum is building. There is an urgent need for an informal and independent ISY Steering Committee to legitimize the ISY and catalyse activities. With creativity and international cooperation, the International Space Year could be the most inspiring and transforming activity of the space age.     

What Might GRACE Contribute to Studies of Post Glacial Rebound?

The NASA/DLR satellite gravity mission GRACE, launched in March, 2002, will map the Earth's gravity field at scales of a few hundred km and greater, every 30 days for five years. These data can be used to solve for time-variations in the gravity field with unprecedented accuracy and resolution. One of the many scientific problems that can be addressed with these time-variable gravity estimates, is post glacial rebound (PGR): the viscous adjustment of the solid Earth in response to the deglaciation of the Earth's surface following the last ice age. In this paper we examine the expected sensitivity of the GRACE measurements to the PGR signal, and explore the accuracy with which the PGR signal can be separated from other secular gravity signals. We do this by constructing synthetic GRACE data that include contributions from a PGR model as well as from a number of other geophysical processes, and then looking to see how well the PGR model can be recovered from those synthetic data. We conclude that the availability of GRACE data should result in improved estimates of the Earth's viscosity profile. This revised version was published online in August 2006 with corrections to the Cover Date.     

单转子风扇的三维反问题气动设计

采用准三维流函数反问题设计方法与三维 N-S求解方法的相互迭代对单转子风扇进行气动设计。在叶片初步计算中得到叶栅进出口气流角沿径向分布 ,并将它作为本文的目标函数。采用准三维反问题求解方法 ,依次构造出各个 S1流面上的叶片几何形状和气流角分布。然后再采用 N-S方程的求解方法 ,对叶片进行全三维流场的数值计算。通过 N-S方程计算结果与目标函数的对比 ,重新修正叶片出口气流角分布 ,并作为下一次反问题设计的目标函数。经过反问题与 N-S方程求解的反复迭代 ,最终得到满足设计要求的叶型。     

A Laser Device for Remote Vibration Measurement

A laboratory study has been made of concepts that utilize a laser for a vibration measurement device. The laser beam possesses the needed characteristics for a spatially directed carrier capable of detecting and transmitting vibration information to remote data processing equipment; furthermore, such a laser vibration measurement device can accomplish the measurement without mechanical contact with the structure under test. The measurement technique utilizes the Doppler shift produced on a wave reflected from a surface vibrating normal to the beam path. Several techniques are available for detecting the Doppler shift; optical heterodyne or homodyne detection and microwave subcarrier modulation methods are candidates for practical instruments. Preliminary results from laboratory experiments indicate Optical heterodyne detection to be the most practical method with present state-of-the-art equipment.