去中心化时差频差直接定位方法

针对原始利用时差频差的直接定位(DPD)方法存在数据传输量和计算量大的瓶颈,提出了两种去中心化直接定位方法。第1种方法采用去中心化配对方案,只将各观测站截获信号在站间进行一次传输,将数据传输和计算分散到各观测站间并行计算互模糊函数(CAF),构造仅满足满秩条件的互模糊矩阵(CAM)。第2种方法根据推导的任意互模糊函数间关系公式,采用归约方式去中心化的在各观测站并行计算余下互模糊函数,补全互模糊矩阵。两种方法都降低了直接定位数据传输量,提高了计算效率。性能分析和仿真实验表明本文两种方法精度性能优于两步定位方法,在低信噪比时两种方法都可达到比较理想的精度性能,在高信噪比时第2种方法与原始直接定位方法的精度性能相当。     

直升机机内PWM照明调光系统产生音频干扰问题的研究

在直升机机内照明调光领域，国外军机已广泛采用脉冲宽度调制（PWM）调光方式。PWM调光方式相比传统线性调光方式具有以下明显优点：效率高，调光范围宽，功耗小，带载能力强，附加损耗小等。但PWM调光系统的不足是电磁辐射，尤其会对机内通话系统产生音频干扰，在机通耳机中会出现明显干扰声，影响机内通话质量。本方案能有效抑制PWM...     

DO-178B可验证的机载操作系统配置生成技术

针对DO-178B适航验证要求对机载嵌入式操作系统配置数据生成技术进行了分析研究,给出了一种可重用的机载嵌入式操作系统配置数据生成器的架构设计。基于这种架构构建的配置数据生成器经过DO-178B适航验证后可适用于不同的机载嵌入式操作系统,从而大大减少机载嵌入式操作系统的适航验证成本。     

基于三维模型定义技术应用的思考

MBD技术是一个新生事物,涉及到系统性问题,它的应用实施是一项长期、复杂而又艰巨的工作。需要考虑的问题不仅涉及技术方面,还有文化、管理、组织和生产方式等方面,只有解决好这些问题,才能充分发挥MBD技术的巨大效力,更好地为我国大飞机研制服务。     

Coastal sea level changes in Europe from GPS,tide gauge,satellite altimetry and GRACE, 1993–2011

Sea level changes are threatening the human living environments, particularly along the European Coasts with highly dense population. In this paper, coastal sea level changes in western and southern Europe are investigated for the period 1993–2011 using Global Positioning System (GPS), Tide Gauge (TG), Satellite Altimetry (SA), Gravity Recovery and Climate Experiment (GRACE) and geophysical models. The mean secular trend is 2.26 ± 0.52 mm/y from satellite altimetry, 2.43 ± 0.61 mm/y from TG+GPS and 1.99 ± 0.67 mm/y from GRACE mass plus steric components, which have a remarkably good agreement. For the seasonal variations, annual amplitudes of satellite altimetry and TG+GPS results are almost similar, while GRACE Mass+Steric results are a little smaller. The annual phases agree remarkably well for three independent techniques. The annual cycle is mainly driven by the steric contributions, while the annual phases of non-steric (mass component) sea level changes are almost a half year later than the steric sea level changes.     

遗传算法在弹道数据融合中的应用

目前靶场采用全测元融合滤波的方式确定目标飞行器弹道,为测控设备提供引导信息并为安全决策和指挥显示提供数据支持。随着靶场测控设备种类和数量越来越丰富,而新的试验任务又对实时弹道融合解算精度提出了更高的要求,全测元融合处理能否提供高精度的融合弹道和快速地从海量融合方案中寻找最优的方案是弹道测量数据融合急需解决的问题。本文提出了基于遗传算法的最优融合方案选择方法,利用该方法得到的融合弹道精度优于全测元融合方案,仿真结果表明了方法的有效性。     

粘钢加固在增强结构强度中的应用

本文结合工程实例介绍了采用粘钢加固法来增强结构强度的设计与施工 ,初步探讨了结构增层改建中采用粘钢加固的计算方法、施工工艺及取得的实际效果。     

Relationship Between Corrosion Level of Steel Bar and Diameter of Corroded Sensing Steel Wire in Wireless Sensor

A kind of wireless sensor was previously developed,which is powered and transmit signals wirelessly instead of using an electrical connection to the embedded reinforcement.Based on this technique,the relationship between diameters of corroded sensing steel wires and corrosion levels of steel bars is established by experiments.Quadratic function is utilized to fit the experiment results,and the correlation coefficients are all larger than 0.95.Estimated corrosion levels of commonly used steel bars are given for different diameters of corroded sensing steel wires fractured due to corrosion.     

Real-time fault detection method based on belief rule base for aircraft navigation system

Real-time and accurate fault detection is essential to enhance the aircraft navigation system’s reliability and safety. The existent detection methods based on analytical model draws back at simultaneously detecting gradual and sudden faults. On account of this reason, we propose an online detection solution based on non-analytical model. In this article, the navigation system fault detection model is established based on belief rule base (BRB), where the system measuring residual and its changing rate are used as the inputs of BRB model and the fault detection function as the output. To overcome the drawbacks of current parameter optimization algorithms for BRB and achieve online update, a parameter recursive estimation algorithm is presented for online BRB detection model based on expectation maximization (EM) algorithm. Furthermore, the proposed method is verified by navigation experiment. Experimental results show that the proposed method is able to effectively realize online parameter evaluation in navigation system fault detection model. The output of the detection model can track the fault state very well, and the faults can be diagnosed in real time and accurately. In addition, the detection ability, especially in the probability of false detection, is superior to offline optimization method, and thus the system reliability has great improvement.     

机器人技术在机械加工中的应用

机器人取代机床从事机械加工已成为自动化加工发展的一大趋向。本文在分析工业机器人应用现状的基础上,提出了机器人加工系统存在的一些问题,还对并联机床的发展作了展望。