A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

项目教学法在《微机系统实现与维护》课程教学中的应用探索

项目教学法突破传统的教学模式,在参与项目完成的过程中学生能更好、更快地掌握所学知识,学习的积极性和主动性大大提高。本文将项目教学法的学习模式引入到高职高专的《微机系统实现与维护》课程教学中,对如何把理论与实践有机地结合,如何提高学生的技能水平作了一定的探索。     

故障检测与分离的广义一致性算子法

本文提出了故障检测与分离的广义一致性算子法的一般形式。得出了两个故障可分离的充要条件和多个故障可分离的充要条件。最后给出了检测和分离故障的过程。     

基于PCI总线的石英晶体元件电参数测试仪

首先介绍PCI总线控制专用芯片S5920的组成,Mailboxs、FIFO、Pass-Thru的基本概念、性能和使用方法。其次介绍测量石英晶体元件参数的阻抗计法和π网络法。对基于PCI总线控制器S5920为核心的π网络法石英晶体元件电参数测试仪的设计和实现作了说明。该方法测量的频率可达2005MHz。利用GPs高精度的授时信号作为频率校准信号校准信号源的精度。     

一种简易的码同步提取方法

描述一种码同步信号的提取方法。根据靶场工作的实际需要 ,在分析码同步器现状的基础上 ,通过深入探讨某型飞行器遥测信息流的特点 ,总结出一种利用 BIΦ码码型特点提取码同步信号的方法。这种简易实用的方法 ,不需要锁相环技术就可以稳定可靠地实现所需的功能     

利用秩统计方法确定不完全S-N数据的p-S-N曲线

本文依据结构不同可靠度下的S—N曲线形状参数相同的观点，利用复合材料结构的不完全S—N数据，得到一组不完全疲劳极限数据，并采用秩统计方法，求得结构的p—S—N曲线，最后，给出了两个应用实例，通过对比分析了本文方法与假定完全寿命法的处理结果，发现本文方法充分利用了数据信息，能给出更好的疲劳性能。     

Net110网吧安全审计管理系统的设计与实施

信息时代对公安管理系统提出了新的挑战，Net110网吧安全审计管理系统充分利用互联网络的技术特点，通过公安监察部门的电脑系统集中，统一和高效地管理在城区分散的网吧。本文着重阐述了系统设计的基本原理，并以南昌市公安局为例，介绍了从需求分析、系统设计到系统实施的建设全过程。     

一个说明语言的设计和其子集编译器的开发

基于软件文档可执行的想法，设计了一个适用于指称语义描述的可执行规范说明语言——ＪＺＣ，并对其核心子集编译器进行了设计与开发。该语言设计采用了模式匹配、类型并置和构造函数等概念，使得抽象文法易于在程度中体现。模块概念的引入使得函数型语言书写的程序更加易懂和易于编写。作为对严格开发方法的一个尝试，ＪＺＣ核心子集编译器的开发采用了该种方法，其中一个“结果正确性定理”的证明是开发过程的重点工作。本文通过一个示例语言简介ＪＺＣ的语言特点，给出了编译器开发过程的一个描述框架和证明梗概