翼伞雀降技术

雀降是翼伞的一种重要性能,在本质上是一种小心操纵的动力失速,使回收系统以最小的速度着陆,降低着陆冲击,实现定点着陆。文章简要介绍了翼伞雀降技术的概念、雀降的典型过程和影响雀降性能的主要因素。目前有限元模拟技术已经用于大型冲压翼伞的雀降技术研究中。随着回收载荷和空投物质量的增加,原来用于翼伞雀降的伺服机构已不再适用,各国正在寻找新的动力源或方法来实现自动雀降。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

缠绕复合材料喷管静力分析

本文对由一般曲线旋转得到的喷管进行了静力分析。文中讨论的喷管由缠绕复合材料构成,承受轴对称和非轴对称载荷作用。在采用有限元法分析时,通过Fourier转换将三维问题简化为二维求解。弹性矩阵中各参数采用合理假设只需由层状平面内三个弹性常数即可确定。文中给出缠绕复合材料喷管在内压和集中力作用下的位移分布算例,结果合理。本文推荐方法可供缠绕柔性喷管和其它类似结构分析时参考。     

新的面向对象编程语言Ada95

介绍了Ａｄａ９５的主要面向对象特征，分析了Ａｄａ９５对面向对象模型和面向对象逻辑设计的支持。     

1958年7月8日磁暴的电离层响应

本文用遍布全球的52个电离层垂测台站资料,研究1958年7月8日磁暴期间全球电离层扰动的发展变化;各扇区的响应特性;扰动的传播轨迹及速度等。获得以下结果:1.几大扇区的电离层扰动始于南北两极,美洲扇区除具这一特征外,其赤道地区在磁暴急始后不久,出现一个扰动中心,邻近区域的扰动受其控制。2.扰动由高纬向低纬发展,由扰动中心向外传播。3.扰动峰面几乎与地磁力线垂直,即扰动沿磁力线方向发展,其传播速度大约在150—600m/s范围。     

捷联惯导系统计算机硬件检测原理与实现

介绍一种实用捷联惯导系统计算机结构。主模块与美国SESCO/TITAN公司的SECS86/20模块兼容,检测软件可以检测板上大中规模集成芯片,具有检测全面、准确的特点,从方法与原理上都具有通用性,可以方便地移植到其它类似的机器上。该软件已用于实际系统。     

末制导中的全向攻击原理

本文提出一种能够实现导弹对活动目标全方位攻击的基本原理,并讨论了工程上实现的途径。通过平面及空间导引弹道仿真,初步证明了它的正确性及可实现性。     

复合材料梁的热弯实验

为研制先进的导弹弹翼，用新研制的复合材料制成工字梁，模拟导弹飞行时翼梁受热弯条件进行实验，测出梁的温度和挠度随时间变化曲线，确定正常使用条件和失效形式，用此复合材料代替现役导弹的金属材料，可明显减重，改善性能。     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。