等离子鞘套热力学波动对电磁波传播的影响

针对等离子鞘套热力学波动造成电磁波传播特性变化的问题,结合湍流理论、等离子理论和电磁波传播理论,得到了热力学参数波动与介电常数间的关系。计算了不同状态下热力学参数波动引起S和Ka波段电磁波透射和反射系数的变化。结果表明,当电子密度增大,S波段反射系数变化减小、透射系数变化增大;当Ka波段在碰撞频率10MHz时,反射系数变化增大、透射系数变化减小,在碰撞频率1GHz和50GHz时透射系数变化反射系数变化先增后减。不同高度下波动的影响也不同,S波段透射和反射系数变化随高度升高先减后增;Ka波段透射系数变化先减后增、反射系数变化先减后增而后再次减小。因此,应根据实际环境状态获得波动的包络范围,进而针对性开展测控通信系统设计。     

低轨天基信息定向分发区域分割编码控制方法

为提高低轨指向性信息分发链路的频谱利用效率,从天基分发平台与地面用户的相对位置关系入手,建立了分发指向、编码增益与信道传输容量的量化关系。在此基础上,提出一种低轨天基信息定向分发区域分割编码控制方法,该方法针对不同信息分发区域,采用最小均方误差(MMSE)作为区域分割准则选择编码方式,既提升了信道传输效率也便于工程实现。最后,本文通过仿真分析了方法的效能和性能影响因素,并与现有自适应编码方法进行了对比,验证了本方法的有效性和可靠性。     

基于最小值原理的冗余度机器人动力学控制

为了解冗余度机器人全局法优化中数值求解的困难,本文讨论了动力学方程的建立,无约束和有约束最优控制问题之间的内在联系,重点分析了求解最优控制问题的数值方法,文中提出了双向异步积分迭代的求解正则方程组的直接迭代法,较好解决了状态方程和协态方程稳定相逆给求解两点这值问题带来的困难。     

先进的宇航试验舱温控系统

介绍了中国新一代宇航试验舱的温控系统。该温控系统设计思想先进、结构新颖。在直径２．３ｍ,长２ｍ的封闭舱体控温面上,实现了０℃～５０℃的任意温度定点控制及９０ｍｉｎ内的正弦波、梯形波、三角波的周期变化;在整个控温面上温度非均匀性（均方根偏差）小于０．３℃,远远超过了非均匀度±１℃、控制精度±２℃的原设计指标。     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

Ni3Al（Zr）合金的高温环境脆性

Ni3Al(Zr)合金在700～1 050°C之间存在低塑性区,无论在空气还是在真空中,都表现出脆性的沿晶断裂,塑性很低.在拉伸过程中形成的致密氧化铝薄膜能够有效地阻止氧向基体中扩散,减少环境脆性,提高合金的高温塑性.活性元素Zr能够与氧原子相互作用,减少裂纹沿晶界扩展,改善合金的高温塑性.     

PIP工艺制备SiC晶须增强SiCf/SiC复合材料的性能

以不同界面层厚度的SiC纤维为增强相,采用先驱体浸渍裂解工艺(PIP)制备SiC_f(PyC)/SiC复合材料,并在复合材料基体中引入SiC晶须,对其性能进行研究。结果表明:热解碳(PyC)界面层厚度约为230 nm时,SiC纤维拔出明显,SiC_f/SiC复合材料拉伸强度、弯曲强度和断裂韧度分别达到192.3 MPa、446.9 MPa和11.4 MPa?m^1/2;在SiC_f/SiC复合材料基体中引入SiC晶须后,晶须的拔出、桥连及裂纹偏转等增韧机制增加了裂纹在基体中传递时的能量消耗,使复合材料的断裂韧度和弯曲强度分别提高了22.9%和9.1%。     

热压工艺在Cf／SiC复合材料制备中的应用

探讨了热压工艺 (HP)在常压浸渍裂解 (PIP)制备 Cf/Si C复合材料制备过程中的应用 ,认为热压浸渍裂解工艺 (HP-PIP)既可以改善碳纤维与基体 Si C之间的界面 ,又可以提高材料的致密度 ,使材料内部的空隙减少或消失 ,同时使孔隙排布均匀 ,从而使材料的性能有了大幅度提高 ,其强度由原来的 2 90 MPa提高到 5 40 MPa,并且可重复性很好     

某型涡轮轴发动机稳态气路故障诊断方法

本文是涡轮轴发动机稳态气路故障诊断方法研究的结果。根据监控功能要求 ,应用气路参数分析法 ,确定反映部件性能参数变化的测量参数 ,建立故障诊断模型 ,探讨分别应用 6个和 4个测量参数诊断气路部件故障的方法