Dynamic characteristics analysis of deployable space structures considering joint clearance

The clearance in joints influences the dynamic stability and the performance of deployable space structures (DSS). A virtual experimental modal analysis (VEMA) method is proposed to deal with the effects of joint clearance and link flexibility on the dynamic characteristics of the DSS in this paper. The focus is on the finite element modeling of the clearance joint, VEMA and the modal parameters identification of the DSS. The finite element models (FEM) of the clearance joint and the deployable structure are established in ANSYS. The transient dynamic analysis is conducted to provide the time history data of excitation and response for the VEMA. The fast Fourier transform (FFT) technique is used to transform the data from time domain to frequency domain. The frequency response function is calculated to identify the modal parameters of the deployable structure. Experimental verification is provided to indicate the VEMA method is both a cost and time efficient approach to obtain the dynamic characteristics of the DSS. Finally, we analyze the effects of clearance size and gravity on the dynamic characteristics of the DSS. The analysis results indicate that the joint clearance and gravity strongly influence the dynamic characteristics of the DSS.     

专用瞄准设备自动检定系统

介绍了专用瞄准设备自动检定系统的系统配置、工作原理及软件设计，并对系统的测量不确定度进行了分析和评定。     

烟丝配料单片机控制系统

本文介绍了配料生产过程中单片机控制系统的硬件结构及软件流程。由于硬件和软件设计上都采用了模块化的结构，所以便于安装调试，整个系统可推广到诸如水泥、矿产、食品加工等生产中。     

New Horizons Mission Design

In the first mission to Pluto, the New Horizons spacecraft was launched on January 19, 2006, and flew by Jupiter on February 28, 2007, gaining a significant speed boost from Jupiter’s gravity assist. After a 9.5-year journey, the spacecraft will encounter Pluto on July 14, 2015, followed by an extended mission to the Kuiper Belt objects for the first time. The mission design for New Horizons went through more than five years of numerous revisions and updates, as various mission scenarios regarding routes to Pluto and launch opportunities were investigated in order to meet the New Horizons mission’s objectives, requirements, and goals. Great efforts have been made to optimize the mission design under various constraints in each of the key aspects, including launch window, interplanetary trajectory, Jupiter gravity-assist flyby, Pluto–Charon encounter with science measurement requirements, and extended mission to the Kuiper Belt and beyond. Favorable encounter geometry, flyby trajectory, and arrival time for the Pluto–Charon encounter were found in the baseline design to enable all of the desired science measurements for the mission. The New Horizons mission trajectory was designed as a ballistic flight from Earth to Pluto, and all energy and the associated orbit state required for arriving at Pluto at the desired time and encounter geometry were computed and specified in the launch targets. The spacecraft’s flight thus far has been extremely efficient, with the actual trajectory error correction ΔV being much less than the budgeted amount.     

飞机起落架的TIG焊工艺

对用手工TIG焊方法代替目前航空部队采用的手工电弧焊(SMAW焊)修理飞机起落架进行了初步探讨,并经试验得出了TIG焊的最佳焊接工艺。     

驾驶员诱发振荡的抑制方法

对电传操纵系统驾驶员诱发振荡（ＰＩＯ）的现象进行了分析，指出了舵回路速率饱和是造成ＰＩＯ的主要原因，并有针对对给出了一种非常规的用于解决饱和非线性问题的程序控制方法。这种方法主要是通过舵回路反馈的状态信息来改变驾驶杆输入信号的放大系数，从而达到有效抑制ＰＩＯ的目的，同时用Ｈｕｒｗｉｔｚ稳定判据进行了机理分析，最后给出了仿真验证结果，证明该方法是简单而有效的。     

A formal approach using SysML for capturing functional requirements in avionics domain

In this work, a Model-Based Systems Engineering approach based on SysML is proposed. This approach is used for the capture and the definition of functional requirements in avionics domain. The motivation of this work is triple: guide the capture of functional requirements, validate these functional requirements through functional simulation, and verify efficiently the consistency of these functional requirements. The proposed approach is decomposed into several steps that are detailed to go from conceptual model of avionics domain to a formal functional model that can be simulated in its operating context. To achieve this work, a subset of SysML has been used as an intermediate modelling language to ensure progressive transformation that can be understood and agreed by system stakeholders. Formal concepts are introduced to ensure theoretical consistency of the approach. In addition, transformation rules are defined and the mappings between concepts of ARP4754A civil aircraft guidelines and SysML are formalized through meta-model. The resulting formalization enables engineers to perform functional simulation of the top-level functional architecture extracted from operational scenarios. Finally, the approach has been tested on an industrial avionics system called the Onboard Maintenance System.     

对建立工业快速动员体系的探讨

本文介绍了美国快速动员体系的基本情况，对建立我国的快速动员体系提出了几点建议。     

高强度钢Domex700MCD焊接性能研究

分析了Domex700MCD焊接性,并通过试验及数据分析表明,在焊接工艺中,采用混合气体保护焊、低合金结构钢焊丝ER69-3,通过控制焊接线能量,运用合理的焊接规范,可获得良好的焊缝机械性能。     

螺栓预紧方式工艺研究

采用液压拉伸螺栓预紧的方法,通过模拟某产品平台螺栓安装预紧的工艺试验研究,优选并确定了工艺的实际操作方法、步骤,以及所需要的工艺参数,为各种大型结构件的螺栓安装提供了技术支持。