无任何附加假设的梁的自由振动

本文不采用平面假设来研究梁的弯曲自由振动，也不采用剪切型振动假设研究短粗梁的自由振动，而用弹性力学的位移法导出了梁的自由振动微分方程，并推导了简支梁的自振频率的统一公式，其特殊情况即为有附加假设的自振频率公式。     

Ku波段波导扫频双六端口网络分析仪

介绍研制的一种实用Ku波段扫频双六端口网络分析仪。该仪器能同时测量双口网络的4个散射参数及单口网络的复反射系数。     

柱面菲涅耳太阳聚光透镜的光学设计和光学效率

研究了柱面线聚焦菲涅耳太阳聚光透镜的光学设计和光学效率。依据理论分析，对透镜参数进行了优化设计，成功地研制出了柱面线聚焦菲涅耳聚光透镜。还分析了透镜相对孔径（F数）和成型模具等因素对透镜光学效率的影响。     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil

Vegetable oil can be used as a base oil in minimal quantity of lubrication(MQL). This study compared the performances of MQL grinding by using castor oil, soybean oil, rapeseed oil, corn oil, sunflower oil, peanut oil, and palm oil as base oils. A K-P36 numerical-control precision surface grinder was used to perform plain grinding on a workpiece material with a high-temperature nickel base alloy. A YDM–III 99 three-dimensional dynamometer was used to measure grinding force,and a clip-type thermocouple was used to determine grinding temperature. The grinding force, grinding temperature, and energy ratio coefficient of MQL grinding were compared among the seven vegetable oil types. Results revealed that(1) castor oil-based MQL grinding yields the lowest grinding force but exhibits the highest grinding temperature and energy ratio coefficient;(2) palm oil-based MQL grinding generates the second lowest grinding force but shows the lowest grinding temperature and energy ratio coefficient;(3) MQL grinding based on the five other vegetable oils produces similar grinding forces, grinding temperatures, and energy ratio coefficients, with values ranging between those of castor oil and palm oil;(4) viscosity significantly influences grinding force and grinding temperature to a greater extent than fatty acid varieties and contents in vegetable oils;(5) although more viscous vegetable oil exhibits greater lubrication and significantly lower grinding force than less viscous vegetable oil, high viscosity reduces the heat exchange capability of vegetable oil and thus yields a high grinding temperature;(6) saturated fatty acid is a more efficient lubricant than unsaturated fatty acid; and(7) a short carbon chain transfers heat more effectively than a long carbon chain. Palm oil is the optimum base oil of MQL grinding, and this base oil yields 26.98 N tangential grinding force,87.10 N normal grinding force, 119.6 °C grinding temperature, and 42.7% energy ratio coefficient.     

民用客机空间布置的经济性思考

民用客机正在不断宽体化、大型化,在窄体机无法合理利用的内部空间,对于宽体机而言却是一个可以再利用的空间。通过对民用客机的空间经济性进行分析,对空间进行重新组合分配,在不提高飞机总成本的情况下,可以提升飞机的盈利能力。本文对国内几家航空公司的年度财务报表进行分析,可以得出客运空间收益要大于货运空间,而其他空间对飞机的经济性贡献较小。这一点,构成了民用客机空间布置时的经济性原则之一。     

基于改进WKNN的位置指纹室内定位算法

位置指纹算法是目前解决室内定位问题的主要方法,指纹特征和匹配算法为影响算法精度的两大因素.针对室内复杂环境下Wi-Fi信号强度波动较大的现象,提出了基于方差的加权距离以改进WKNN算法.在离线特征提取阶段,选择了均值和方差两个特征值,既反映该采样点的RSS幅值,也反映该点RSS的波动情况;在线阶段,根据方差提出了加权距离进行相似度的计算,查找距离最近的K近邻点,并以实际环境下采集的数据验证了改进WKNN算法在RSS波动大的情况下对定位效果的改善,在综合考虑了AP组合的影响后,实现了误差均值为1.456m的定位效果.     

三轴气浮台转动惯量测试方法研究

提出了一种用于实测在多轴多体卫星全物理仿真中的三轴气浮台转动惯量的新方法,着重叙述其测试原理、步骤,并进行了单通道全物理仿真试验,试验结果分析表明,该方法误差较小,又无须增添专用测试设备,因而是气浮台试验中一种简单实用的转动惯量测试方法。此方法也可稍做推广即可应用于卫星在轨运行状态监测和在轨故障检测等几个研究方面。