Optimization of the Energy-Storage Inductors for DC-to-DC Converters

Three sets of design graphs and equations are developed to facilitate design of the energy-storage inductors for dc-to-dc converters. Using the design graphs, a quick estimate of the inductor minimum weight, the transistor peak current, and the inductor power loss can be obtained. Tradeoff studies can be conveniently conducted using these graphs. The effects of duty cycle controllers, constant frequency and constant tON, on the optimal selection of the energystorage inductors are assessed.     

Power Converter Design Optimization

Utilizing the demonstrated capability of nonlinear programming algorithms, a practical design optimization approach for power converters is established which allows conception of a design to meet all power-circuit performance requirements and concurrently optimize a defined quantity such as weight or losses. In addition to facilitating a costeffective design, the computer-aided approach provides a means to readily assess 1) the weight-efficiency tradeoff, 2) impacts of converter requirements and component characteristics on a given design, and 3) optimum powersystem configurations.     

Climatic variations in the outgoing longwave radiation of the past decade as observed from NOAA polar orbiting satellites

Components of the earth radiation budget have been calculated on a regular basis since June 1974 (except for a 10 month gap in data in 1978) based on measurements by the scanning radiometers and the advanced very high resolution radiometers on the operational NOAA polar orbiting satellites. A new base set of monthly and seasonal averages of outgoing longwave radiation has been prepared by NOAA's Climate Analysis Center (CAC) for the entire period of record through November 1983. Anomalies relative to these new normals have now been constructed for each month and season in the entire record.In this presentation, some of the more prominent anomalies of outgoing longwave radiation over the past decade are discussed. A major concentration is on the tropics and subtropics where there have been very substantial radiation variations associated with major shifts in convective cloudiness accompanying El Niño/Southern Oscillation events.     

The International Space Station human life sciences experiment implementation process.

The selection, definition, and development phases of a Life Sciences flight research experiment has been consistent throughout the past decade. The implementation process, however, has changed significantly within the past two years. This change is driven primarily by the shift from highly integrated, dedicated research missions on platforms with well defined processes to self contained experiments with stand alone operations on platforms which are being concurrently designed. For experiments manifested on the International Space Station (ISS) and/or on short duration missions, the more modular, streamlined, and independent the individual experiment is, the more likely it is to be successfully implemented before the ISS assembly is completed. During the assembly phase of the ISS, science operations are lower in priority than the construction of the station. After the station has been completed, it is expected that more resources will be available to perform research. The complexity of implementing investigations increases with the logistics needed to perform the experiment. Examples of logistics issues include- hardware unique to the experiment; large up and down mass and volume needs; access to crew and hardware during the ascent or descent phases; maintenance of hardware and supplies with a limited shelf life,- baseline data collection schedules with lengthy sessions or sessions close to the launch or landing; onboard stowage availability, particularly cold stowage; and extensive training where highly proficient skills must be maintained. As the ISS processes become better defined, experiment implementation will meet new challenges due to distributed management, on-orbit resource sharing, and adjustments to crew availability pre- and post-increment.     

Parameterization and adaptive control of space robot systems

In space application, robot system are subject to unknown or unmodeled dynamics, for example, in the tasks of transporting an unknown payload or catching an unmodeled moving object. We discuss the parameterization problem in dynamic structure and adaptive control of a space robot system with an attitude-controlled base to which the robot is attached. We first derive the system kinematic and dynamic equations based on Lagrangian dynamics and the linear momentum conservation law. Based on the dynamic model developed, we discuss the problem of linear parameterization in term of dynamic parameters, and find that in joint space, the dynamics can be linearized by a set of combined dynamic parameters; however, in inertial space linear parameterization is impossible in general. Then we propose an adaptive control scheme in joint space, and present a simulation study to demonstrate its effectiveness and computational procedure. Because most takes are specified in inertial space instead of joint space, we discuss the issues associated to adaptive control in inertial space and identify two potential problem: unavailability of joint trajectory because the mapping from inertial space trajectory is dynamic-dependent and subject to uncertainty; and nonlinear parameterization in inertial space. We approach the problem by making use of the proposed joint space adaptive controller and updating the joint trajectory by the estimated dynamic parameters and given trajectory in inertial space     

A passive millimeter wave camera for aircraft landing in lowvisibility conditions

Fog and low visibility conditions have hampered aviation since its inception. Fog-related accidents are numerous, and canceled take-offs and landings due to fog and low visibility conditions (Cat III) have significant economic impact on airlines, parcel carriers and general aviation. Millimeter waves have good propagation properties in weather and give adequate spatial resolution when used to image the forward scene. Passive millimeter wave focal plane array cameras are new sensors which, integrated into future guidance and landing systems, promise to be an effective aid, or alternative, to existing technology for aircraft landings and take-offs under Cat III conditions. They can produce visual-like radiometric images at real time frame rates (up to 30 Hz), and are directly amenable to image fusion with infrared and visible images. TRW has been actively involved in developing and productizing this technology both at the hardware and the system levels     

Bacillus subtilis spores on artificial meteorites survive hypervelocity atmospheric entry: implications for Lithopanspermia

An important but untested aspect of the lithopanspermia hypothesis is that microbes situated on or within meteorites could survive hypervelocity entry from space through Earth's atmosphere. The use of high-altitude sounding rockets to test this notion was explored. Granite samples permeated with spores of Bacillus subtilis strain WN511 were attached to the exterior telemetry module of a sounding rocket and launched from White Sands Missile Range, New Mexico into space, reaching maximum atmospheric entry velocity of 1.2 km/s. Maximum recorded temperature during the flight was measured at 145 degrees C. The surfaces of the post-flight granite samples were swabbed and tested for recovery and survival of WN511 spores, using genetic markers and the unique DNA fingerprint of WN511 as recovery criteria. Spore survivors were isolated at high frequency, ranging from 1.2% to 4.4% compared with ground controls, from all surfaces except the forward-facing surface. Sporulation-defective mutants were noted among the spaceflight survivors at high frequency (4%). These experiments constitute the first report of spore survival to hypervelocity atmospheric transit, and indicate that sounding rocket flights can be used to model the high-speed atmospheric entry of bacteria-laden artificial meteorites.     

The termination shock of the solar wind

An overview of the solar wind termination shock is presented including: its place in the heliosphere and its origin; its structure including the role of interstellar pickup ions and galactic and anomalous cosmic rays; its inferred location based on Lyman- backscatter, Voyager radio signals, and anomalous cosmic rays; its shape and movement.     

LEO原子氧对空间材料侵蚀的数值模拟

提出了吸附作用(包括物理吸附和化学吸附)是引起空间材料原子氧腐蚀的主要机理.以此为依据,建立了相应的腐蚀量的反应-扩散方程.应用分子动力学经典碰撞理论的估算表明了方程中的物理作用项对于扩散效应为一小量,从而进一步简化了方程.在所建立的模型方程中,选用了基于Eyring绝对速率理论的扩散系数.对空间表面材料Kapton在近地轨道LEO(Low Earth Orbit)环境受原子氧侵蚀的过程进行了数值模拟,计算结果与飞行试验数据在误差允许的范围内符合得较好.     

计算三维边界层分离流动的一种双向推进有限元格式

 本文提出一种适用于兰维边界层正、逆向问题的有限元格式。格式采用了对壁面法向进行Galerkin加权,沿壁面进行子域加权并作双向推进的弱解形式。它不仅可节约内存,同时还可通过与等参元素的结合应用给出CFL条件的显式表述,保证了问题的快速求解。进行逆模态计算时,以位移厚度作约束条件,通过Lagrange乘子直接引入边界层方程的有限元类比中进行整体求解。算例表明该格式模拟三维边界层流动是经济有效的。