On the arc length of observations of a small solar system body sufficient to classify it as hazardous

This paper analyzes the accuracy of orbit determination calculated by observations of short arcs. In this case, we imposed the condition that the arc length and/or the distribution of arc observations should provide a confident classification of the orbit of a small celestial body allowing one to distinguish a potentially hazardous body, also including a threat of collision.     

中心进气转静系转盘风阻扭矩数值模拟

采用计算流体力学(CFD)商业软件CFX从流动参数及几何结构两个方面对中心进气转静系盘腔内转盘风阻扭矩特性进行了数值模拟研究,同时搭建一个转盘风阻扭矩实验台测量自由盘风阻扭矩.中心进气转静系转盘风阻扭矩与经典经验公式进行了对比,结果表明:利用数值模拟方法,得到的无量纲扭矩系数与经典经验关系式计算得到的数据总体相差小于10%,利用湍流参数来表征转盘转速以及叠加流流量,对于分析转盘风阻扭矩非常便利.利用湍流参数定量分析时需注意叠加流以及转速的量级同样影响着风阻扭矩的数值.几何结构对于风阻扭矩也有影响,但相比流动参数影响较小.      

Mercury’s Weather-Beaten Surface: Understanding Mercury in the Context of Lunar and Asteroidal Space Weathering Studies

Mercury’s regolith, derived from the crustal bedrock, has been altered by a set of space weathering processes. Before we can interpret crustal composition, it is necessary to understand the nature of these surface alterations. The processes that space weather the surface are the same as those that form Mercury’s exosphere (micrometeoroid flux and solar wind interactions) and are moderated by the local space environment and the presence of a global magnetic field. To comprehend how space weathering acts on Mercury’s regolith, an understanding is needed of how contributing processes act as an interactive system. As no direct information (e.g., from returned samples) is available about how the system of space weathering affects Mercury’s regolith, we use as a basis for comparison the current understanding of these same processes on lunar and asteroidal regoliths as well as laboratory simulations. These comparisons suggest that Mercury’s regolith is overturned more frequently (though the characteristic surface time for a grain is unknown even relative to the lunar case), more than an order of magnitude more melt and vapor per unit time and unit area is produced by impact processes than on the Moon (creating a higher glass content via grain coatings and agglutinates), the degree of surface irradiation is comparable to or greater than that on the Moon, and photon irradiation is up to an order of magnitude greater (creating amorphous grain rims, chemically reducing the upper layers of grains to produce nanometer-scale particles of metallic iron, and depleting surface grains in volatile elements and alkali metals). The processes that chemically reduce the surface and produce nanometer-scale particles on Mercury are suggested to be more effective than similar processes on the Moon. Estimated abundances of nanometer-scale particles can account for Mercury’s dark surface relative to that of the Moon without requiring macroscopic grains of opaque minerals. The presence of nanometer-scale particles may also account for Mercury’s relatively featureless visible–near-infrared reflectance spectra. Characteristics of material returned from asteroid 25143 Itokawa demonstrate that this nanometer-scale material need not be pure iron, raising the possibility that the nanometer-scale material on Mercury may have a composition different from iron metal [such as (Fe,Mg)S]. The expected depletion of volatiles and particularly alkali metals from solar-wind interaction processes are inconsistent with the detection of sodium, potassium, and sulfur within the regolith. One plausible explanation invokes a larger fine fraction (grain size <45 μm) and more radiation-damaged grains than in the lunar surface material to create a regolith that is a more efficient reservoir for these volatiles. By this view the volatile elements detected are present not only within the grain structures, but also as adsorbates within the regolith and deposits on the surfaces of the regolith grains. The comparisons with findings from the Moon and asteroids provide a basis for predicting how compositional modifications induced by space weathering have affected Mercury’s surface composition.     

Observational Tests of the Picture of Disk Accretion

In this chapter, I present a summary of observational tests of the basic picture of disk accretion. An emphasis is placed on tests relevant to black holes, but many of the fundamental results are drawn from studies of other classes of systems. Evidence is discussed for the basic structures of accretion flows. The cases of systems with and without accretion disks are discussed, as is the evidence that disks actually form. Also discussed are the hot spots where accretion streams impact the disks, and the boundary layers in the inner parts of systems where the accretors are not black holes. The nature of slow, large amplitude variability is discussed. It is shown that some of the key predictions of the classical thermal-viscous ionization instability model for producing outbursts are in excellent agreement with observational results. It is also show that there are systems whose outbursts are extremely difficult to explain without invoking variations in the rate of mass transfer from the donor star into the outer accretion disk, or tidally induced variations in the mass transfer rates. Finally, I briefly discuss recent quasar microlensing measurements which give truly independent constraints on the inner accretion geometry around black holes.     

Forecasting the future in space: Highlights from the TechCast Project

Space technology and activities have changed markedly from the early days of the space era and are continuing to develop rapidly. The TechCast Project—set up to pool the knowledge of experts in the scientific fields—includes space in its predictions. Here its president reports on its space forecasts for the 21st century. The importance of the shift towards the privatization of space is noted and the near-to-medium-term impossibility of interstellar travel conceded. Contact with ETI is deemed much more likely, however.     

Creating a productive international partnership in the Vision for Space Exploration

When US President George W. Bush on 14 January 2004 announced a new US “Vision for Space Exploration”, he called for international participation in “a journey, not a race”, a call received with skepticism and concern elsewhere. But, after a slow start in implementing this directive, during 2006 NASA has increased the forward momentum of action on the program and of discussions on international cooperation in exploring “the Moon, Mars, and beyond”. There are nevertheless a number of significant top-level issues that must be addressed if a cooperative approach to human space exploration is to be pursued. These include the relationship between utilization of the ISS and the lunar exploration plans, integration of potential partners’ current and future capabilities into the exploration plans, and the evolving space-related intentions of other countries.     

Lunar-based enterprise infrastructure—hidden keys for long-term business success

Discussions on the creation of lunar bases or Moon-based industrial operations tend to focus on large issues i.e. transportation, cost, and/or sustainability. But assume that the fledging lunar enterprise is successful and engenders other Moon-based operations that also grow in terms of size and scope. Could success become more problematic than failure if some often minimized, yet essential, requirements for long-term human occupation of the Moon were ignored? This paper looks at lunar operations in terms of what will be required for long-term success as participants come to view themselves as terrestrial expatriates rather than engaged in short-term duty assignments.     

Policy model for space economy infrastructure

Extraterrestrial infrastructure is key to the development of a space economy. Means for accelerating transition from today's isolated projects to a broad-based economy are considered. A large system integration approach is proposed. The beginnings of an economic simulation model are presented, along with examples of how interactions and coordination bring down costs. A global organization focused on space infrastructure and economic expansion is proposed to plan, coordinate, fund and implement infrastructure construction. This entity also opens a way to raise low-cost capital and solve the legal and public policy issues of access to extraterrestrial resources.     

Working and walking on small asteroids with circumferential ropes

The low gravity of a small asteroid would present a challenge for an astronaut attempting to work on its surface. Extravehicular activities (EVAs) of the sophistication of the Apollo Moon missions are not likely to be possible if astronauts attempt to walk freely on the asteroid, hover above its surface, or anchor locally into the regolith. Manipulating large rocks, drilling, and excavating at multiple locations is a high priority science objective, but would be difficult without a hold-down mechanism. If the asteroid has even a small rotation rate, maneuvering precisely over its surface could be cumbersome. A plausible means of conducting complex EVAs is to tie ropes entirely around the asteroid, under which the astronaut is pushed downward onto the asteroid surface by the tension in the rope. The downward force provides an artificial gravity that permits the astronaut to drill, excavate, hammer, and carefully document materials on the surface without the worry of being thrown from the asteroid. An astronaut could also use the ropes as handholds or guides to maneuver freely over the surface.     

Proton fluxes measured by low-orbit satellites

In this paper we consider the fluxes of protons in the energy range from 30 keV to 140 MeV recorded by instruments onboard the Russian satellites KORONAS-F and UNIVERSITETSKII and on the American satellites GOES-11 and NOAA-17. In order to estimate the reliability of the obtained data, the comparison of measurements of separate energy channels of these instruments between themselves is performed. Experimental fluxes of trapped protons are compared with the fluxes predicted by the AP8 model.