芯片互联结构断裂失效的试验研究与统计分析

针对电子芯片互联结构失效机理复杂、寿命数据难以获取且缺乏具有理论依据支撑的寿命分布模型等问题,开展了基于退化试验数据的统计分析研究,并提出了2种统计建模方法。首先,搭建了电子芯片可靠性评估试验台,利用菊花链测试芯片为试验对象获取了互联结构的退化数据和寿命数据;其次,基于断裂力学理论,分析了互联结构断裂失效的失效机理,给出了BGA封装形式的电子芯片互联结构寿命分布服从两参数威布尔分布的理论依据,由此建立了基于寿命数据的电子芯片互联结构寿命分布模型;再次,利用退化量的分布建立了基于退化量数据的电子芯片互联结构寿命分布模型;最后,对2种统计建模方法进行比较分析。结果表明,基于退化量数据的寿命分布模型与基于寿命数据的寿命分布模型吻合度良好,2种分析方法在结果上具有一致性。      

单屏温度传感器内部流场数值模拟研究

单屏温度传感器普遍应用于航空航天领域中的气流温度测量,本文对单屏温度传感器的内部流场进行了数值模拟研究,获得了单屏温度传感器内部的速度分布、温度分布以及压力分布等参数,为该型传感器的结构设计和使用提供了理论支持。     

鸭式导弹舵翼面间距影响滚转的数值研究

鸭式导弹的横滚特性制约了鸭式导弹性能提升,其原因在于：固定尾翼鸭式导弹不能实现横滚控制。研究表明：对固定尾翼鸭式布局导弹,当鸭舵做副翼偏转进行滚转控制时,导弹上会产生数值很大的反向诱导滚转力矩,使鸭舵难以进行滚转控制。造成这一结果的原因很多,采用数值模拟方法研究鸭式布局导弹舵翼面间距对其横向特性的影响。     

FY-3A卫星与NOOA系列卫星高能带电粒子实测结果的比较

FY-3A卫星是运行于830 km高度的太阳同步轨道气象卫星,其搭载的空间环境监测器可观测3～300 MeV的高能质子和0.15～5.70 MeV的高能电子.FY-3A卫星在轨工作期间,太阳活动处于由谷年向峰年过渡期,空间环境非常平静,探测结果显示3～300 MeV的高能质子分布主要集中在南大西洋辐射带异常区,0.15～5.70 MeV的高能电子分布区域除南大西洋异常区外,还分布在南北两极高纬区域.FY-3A与NOAA卫星测量结果反映出带电粒子强度及分布区域随投掷角变化的空间各向异性特征.本文在充分考虑了带电粒子时间、空间分布差异以及比对探测器之间自身设计差异的前提下,经过归一化处理后,首次对两颗卫星同期探测结果进行相关性分析,验证了两颗卫星相同时空条件下高能带电粒子通量分布的一致性;说明FY-3A空间环境监测器不仅具备空间带电粒子辐射监测能力,且探测结果有效可靠,可用作辐射带环境数据源的组成部分,为发展新的模型,深入研究辐射带高能粒子的分布、起源和传输等提供新的观测依据.     

Investigation of straightforward impedance eduction method on single-degree-of-freedom acoustic liners

In order to address the current aircraft noise problem, the knowledge of impedance of acoustic liners subjected to high-intensity sound and grazing flow is of crucial importance to the design of high-efficiency acoustic nacelles. To this end, the present study is twofold. Firstly, the StraightForward impedance eduction Method (SFM) is evaluated by the strategy that the impedance of a liner specimen is firstly experimentally educed on a flow duct using the SFM, and then its accuracy is checked by comparing the numerical prediction with the measured wall sound pressure of the flow duct. Secondly, the effects of grazing flow and high-intensity sound on the impedance behavior of two single-layer liners are investigated based on comparisons between educed impedance and predictions by three impedance models. The performance of the SFM is validated by showing that the educed impedance leads to excellent agreement between the simulation and the measured wall sound pressure for different grazing flow Mach numbers and Sound Pressure Levels (SPLs) and over a frequency range from 3000?Hz down to 500?Hz. The grazing flow effect generally has the tendency that the acoustic resistance exhibits a slight decrease before it increases linearly with an increase in Mach, predicted successfully by the sound-vortex interaction theoretical model and the Kooi semi-empirical impedance model. However, the Goodrich semi-empirical impedance model gives only a simple linear relation of acoustic resistance starting from Mach zero. Additionally, when the SPL increases from 110 to 140?dB in the present investigation, the acoustic resistance exhibits a significant increase at all frequencies in the absence of flow; however, the resistance decreases slightly under a grazing flow of Mach 0.117. It indicates that the SPL effect can be greatly inhibited when flow is present, and the grazing flow effect can be reduced partly as well at a relatively high SPL.     

多机布阵航路规划问题研究

针对多机布阵航路规划问题,提出了一种新的策略。首先,建立了多机航路规划模型;然后,采用聚类分析的方法将浮标点分类,并给出了任务分配的原则,从而将多机航路规划问题转化为单机航路规划问题;最后,利用模拟退火算法分别求解,并在此基础之上采用平均路径长度的方法给出了优化算法。     

Remaining useful life prediction based on variation coefficient consistency test of a Wiener process

High-cost equipment is often reused after maintenance, and whether the information before the maintenance can be used for the Remaining Useful Life (RUL) prediction after the maintenance is directly determined by the consistency of the degradation pattern before and after the maintenance. Aiming at this problem, an RUL prediction method based on the consistency test of a Wiener process is proposed. Firstly, the parameters of the Wiener process estimated by Maximum Likelihood Estimation (MLE) are proved to be biased, and a modified unbiased estimation method is proposed and verified by derivation and simulations. Then, the h statistic is constructed according to the reciprocal of the variation coefficient of the Wiener process, and the sampling distribution is derived. Meanwhile, a universal method for the consistency test is proposed based on the sampling distribution theorem, which is verified by simulation data and classical crack degradation data. Finally, based on the consistency test of the degradation model, a weighted fusion RUL prediction method is presented for the fuel pump of an airplane, and the validity of the presented method is verified by accurate computation results of real data, which provides a theoretical and practical guidance for engineers to predict the RUL of equipment after maintenance.     

基于PSD的并联微定位平台位姿检测方法

位置姿态（以下简称位姿）检测是研究六自由度定位平台的技术难点之一,为了快速准确测量六自由度并联微定位平台的位姿,验证平台的定位精度,基于多片二维PSD光电位置传感器设计了六自由度光学位姿检测系统。依据几何光学理论,建立了六自由度位姿解算的数学模型。通过仿真计算,该算法可以快速准确解算六自由度定位平台位姿。进一步分析了该模型在考虑存在测量误差时的理论计算误差,结果表明,基于二维PSD位置传感器的六自由度光学位姿检测系统在解算六自由度定位平台位姿的同时,具备较高的测量精度。     

基于LSTAR的机载燃油泵多阶段退化建模

机载燃油泵的性能退化呈现出平稳—加速—平稳的非线性、多阶段模式,针对现有退化模型难以准确描述其全寿命周期性能退化的问题,以逻辑平滑转换自回归(LSTAR)模型为工具,对机载燃油泵出口压力传感器信号进行建模。首先,对转换后的压力传感器信号建立自回归(AR)模型,通过非线性检验说明建立LSTAR模型的必要性;然后,应用非线性最小二乘法完成参数估计;最后,在AIC准则最小及拟合优度最大的原则下,选择转换变量,通过残差进行模型的适应性检验与正态性检验。结果表明:基于LSTAR模型的拟合精度明显优于线性自回归模型。本文提出的方法成功解决了机载燃油泵性能退化的多阶段准确建模问题,为机载燃油泵的预测与健康管理(PHM)奠定了坚实的基础。     

关于卫星姿态确定非线性滤波算法的研究

本文探讨了利用方位矢量和陀螺速率观测信息确定卫星姿态的问题。该问题实际上是一个非线性/非高斯状态滤波问题,因此,经典的基于EKF和UKF算法的姿态滤波器有可能失败,尤其是当初始状态的先验估计不可能精确得知的情况下。近来,粒子滤波理论已经开始应用于姿态确定问题,但是,这类算法往往需要大量的“粒子”,这对有限计算能力来说是一个沉重的负担。为此,本文尝试利用双重滤波方法,在每个序贯估计过程中,将有陀螺姿态确定问题暂时分解为1个四元数估计问题和1个陀螺常漂参数估计问题。本文提出了2个双重滤波器,包括1个姿态确定双重粒子滤波器和1个姿态确定的混合型滤波器。这两者都采用一个相同的四元数粒子滤波器,但在粒子重采样和平滑处理方面,不同于近来提出的类似滤波器。至于陀螺常漂估计,双重粒子滤波器发展了一个辅助粒子滤波器,而混合滤波器中则发展了一个参数UKF滤波器。通过与经典的姿态确定滤波器的仿真比较,证实了本文新提的2个算法的有效性和优越性。