INMARSAT integrity channels for global navigation satellite systems

The transmission of integrity information using a signal format compatible with the Global Positioning System (GPS) and relayed through a geostationary satellite repeater, which will be critical in achieving high integrity and availability of global navigation by satellite is discussed. The inclusion of navigation repeaters designed to fulfil this function, the next generation of INMARSAT spacecraft, INMARSAT-3 is examined. The global navigation satellite system (GNSS) integrity channel (GIC) will employ pseudorandom codes in the same family as, but distinct from, the codes reserved by GPS. The data format of the basic integrity channel is designed to convey user range error information for 24 to 40 satellites. A closed-loop timing compensation technique will be used at the uplinking Earth station, to make the signal's clock and carrier Doppler variations identical to those that would result from an onboard signal source. Therefore, the INMARSAT-3 satellites will increase the number of useful navigation satellites available to any user, and can also function as sources of precise timing. There is also a possibility that wide area differential corrections can be carried on the same signal     

Latitudinal influences on the quiet daytime D-region

Four versions of a steady-state quiet D-region model are presented. They differ from each other as a result of latitudinal differences in total neutral particle concentrations, nitric oxide concentrations and cosmic ray ionization rates. The total ion concentration profiles of all four versions have minima near 70 km which range from about 10⁸ m^?3 at high latitudes to 3.5 × 10⁷ m^?3 at equatorial latitudes for a solar zenith angle of 60°. Neutral density differences among the four cases result in important vertical shifts for the respective D-region profiles relative to one another. A “C-layer” is evident for the high and mild-latitude models at large solar zenith angles. The altitude where the negative ion/electron concentrations ratio is unity varies from about 63 to 67 km. The computed results are compared briefly with the extensive data base in the literature.     

Concatenated Sequences for Spread Spectrum Systems

Concatenated sequences are suggested and developed for use in spread spectrum (SS) systems. Special receiver realization is discussed and it is shown that the concatenated sequences offer great advantage in reducing the size of the matched filter correlators (MFC) in the SS receiver. Experimental systems have been built using concatenated sequences and their performance is reported here. It has been shown that a processing gain of 60 is obtainable with a 15 × 4 concatenated sequence which requires three tapped delay lines (TDL), two of length 15 and one of 4. Thus a total of only 34 delay units (with a nonlinear interface network, only 19 delay units) are required. Teleprinter signals can be transmitted over telephone channels using a bandwidth (BW) expansion of 60 with an input signal-to-noise ratio (SNR) of only -5.1 dB, resulting in a character- error-rate of 1 in 103. Techniques have been developed to reduce the sidelobe levels in the aperiodic autocorrelation functions (ACF) of the pseudonoise (PN) codes. For 15 length and 7 length PN sequences, sidelobes are reduced by 9 dB and 9.4 dB, respectively, using transversal filters. Application of the SS systems to the problem of multiaccessing and antijamming are discussed.     

The instrument IKS and its calibration

The IKS infrared spectro-photometer will fly on board the VEGA platforms. It is designed to characterize the size, temperature and emissivity of the Comet Halley nucleus, to identify the major gaseous components of the inner coma and to detect the emission of the cometary grains. This paper presents the “calibration” experiments required to reduce the raw data: (i) absolute wavelength calibration of the filter wheels; (ii) modeling of the internal signal, as a function of the temperature of the different sub-systems; (iii) absolute and spectral responsivities of each of the spectrometric and photometric channels, as a function of the wavelength and position of the source in the field of view. Finally, we shall indicate the expected S/N ratios.     

Adaptive Array Bandwidth with Tapped Delay-Line Processing

The bandwidth of adaptive arrays with tapped delay lines behind the elements is examined. Such processing offers improved bandw over that attainable with quadrature hybrid processing. The performance of a two-element array with four types of processing (equarature hybrids, single delay lines, 3-tap delay lines, and 5-tap delay lines) is compared. It is shown that with half-wavelength element spacing, a quadrature hybrid and single delay-line processor are inadequate at 10-percent bandwidth. A 3-tap processor is adeq however, up to 40-percent bandwidth.     

Advances in infrared and sub-millimeter filters

Infrared filters use a large variety of physical principles and techniques, as can be expected since they cover three decades of the IR spectrum (1 μm - 1 mm). The multilayer interference filters, derived from optical techniques, play the main role in the region 1 μm–40 μm. They have been successfully used in space applications. On the other side of the spectrum is the domain of metallic mesh filters, which is still developing. Bulk absorption, Reststrahlen bands, diffusion and gratings are also used to achieve the desired properties. A short review of this situation is given, with emphasis on the present trends and developments.Infrared and sub-millimeter filters use a large variety of physical principles and techniques that we may classify in two large families.     

The microlesion concept in HZE particle dosimetry.

High energy, high-Z (HZE) particles are present in high-altitude and high-inclination satellite orbits. Most of the HZE dose above LET = 200 keV/micrometer is due to Fe nuclei. Individual HZE particles can damage several cells adjacent to one another along the particle track in tissue. The outcome has been described as a "microlesion" by D. Grahn. The present study attempts to define conditions for microlesions in specific tissues, to seek biological evidence that microlesions are produced, and to evaluate the microlesion as a potentially useful unit of dose in assessing hazards to spaceworkers. Microlesions in individuals cells and hair follicles have been described. Microbial studies have provided some evidence for independent secondary electron action. Whether or not a few hundred microlesions would be damaging to the whole organism depends upon the nature of damage to critical tissues. For example, cancer may occur if microlesions kill several cells in a straight line and mutate other cells alongside the particle track. Fe particle irradiation of the mouse Harderian gland (Fry et al., this issue) produces tumors efficiently. Microlesions in the lens, cornea, and retina need to be considered. Further dialogue is required before a final decision can be made concerning the most appropriate way to assess the HZE hazard.     

Growth and development of plants flown on the STS-3 Space Shuttle mission

Pre-germinated pine seedlings and germinating oat and mung bean seeds were flown on the STS-3 Space Shuttle mission. Overall, the seedlings grew and developed well in space. Some oat and mung bean roots, however, grew upward. Lignin content was slightly lower in flight tissues and protein content was higher.     

Subjective vertical before and after space flight

Three scientist astronauts on the D1 spacelab mission participated in a series of orientation experiments before and after exposure to orbital weightlessness. Each subject was tilted about a roll axis at 15 deg intervals up to +/-90 deg. At each angle the subject set a luminous line to what he perceived to be the vertical. The results of these tests are presented.